2. ROOMS TO GO
  3. 18118477

ROOMS TO GO 18118477 Assembly Instructions

  • Hello! I've analyzed the assembly instructions for the Martha Stewart Anna Arm Accent Chair. This document details how to put together the chair using the provided parts and hardware. It covers attaching legs and adding the seat cushion. I'm ready to answer any questions you have about the assembly process.
  • What parts are included in the package?
    What hardware is needed for assembly?
    How do I assemble the legs to the chair?
    What is the last step?
PARTS #
PARTS NAME QTY
P1
FRONT LEGS 2
P2
BACK LEGS 2
P3
CHAIR 1
P4
SEAT CUSHION 1
Hardware#
PARTS NAME QTY
H1
Bolts
φ5/16*1" 8
H2
Lock Washers
φ5/16"
8
H3
Flat Washers
φ5/16" 8
H4
Allen Wrench
φ1/4" 1
3. Place the chair upright on a level surface, put the seat cushion (P4) on it .
Assemble is complete.
2. Using bolts (H1), lock washers (H2), flat washers (H3) to connect legs(P1,P2) to chair (P3). Tighten bolts (H1)
with Allen Wrench (H4).
DRAWING
1.Turn the chair (P3) upside down and lay on protective carpet, open the black fabic on bottom and take out the
legs and hardwares .
Assembly Instruction--Anna Arm Accent Chair
DRAWING
X12
X12
X12
P1
P2
P1
P2
/