2. Winners Only
  3. BN2001Q

Winners Only BN2001Q Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BN2001QH headboard, explaining the necessary steps and components. It includes safety precautions and advises on using a bunkie board instead of a box spring. I'm ready to assist with your assembly questions.
  • Is it recommended to assemble this product alone?
    What should be done with the packing materials?
    What is the correct way of tightening screws or bolts?
BN2001QH
Step 1: Lay the Headboard Panel frontside down on a smooth and
clean surface.
Step 2: Attach Left and Right Headboard Legs (B) to the Headboard
Panel (A) using Long Bolt (1), Spring Washer (2), Flat Washer (3).
Do not fully tighten yet.
Step 3: Attach Headboard Stretcher (C) to Left and Right Headboard
Legs (B) using Long Bolt (1), Spring Washer (2), Flat Washer (3),
tighten with Allen Key (4).
Step 4: Fully tighten all the bolts.
4pcs
A
1pc
1pc1pc10pcs1pc
10pcs10pcs
Headboard Footboard Slats
ABCDEF
Component List :
8 pcs
NOTE: Bunkie Board must be used to replace Box Spring.
2 pcs
4 pcs
/