SW95 SLASH CRY BABY
®
WAH WAH
POWER
The SW95 Slash Cry Baby
®
Wah Wah is
powered by two 9-volt batteries (accessed
via the top of the pedal), an AC adapter
such as the Dunlop ECB004/ECB004E,
or a DC Brick
™
power supply.
SETUP INSTRUCTIONS
•Runaninstrumentcablefromyour
guitartotheSW95’sINSTRUMENT
jackandanotherinstrumentcable
fromtheSW95’sAMPLIFIERjack
intoyouramplier’sinput.
•SetVOLUMEandGAINcontrolsto
their 12 o’clock positions.
•Pushthetoeofthepedaldownuntilyou
feel a “click” to turn the pedal on/off.
•RotatetheVOLUMEcontrolclockwiseto
increasevolumeorcounterclockwiseto
decrease it.
•ToengagetheSW95’sdistortioncircuit,
pushintheredDISTORTIONswitch.
•Rockyourfootbackandforthonthe
pedal to hear the vocal, expressive tones
thattheCryBabyisfamousfor.
•RotatetheGAINcontrolclockwiseto
increaseamountofdistortionorcounter-
clockwise to decrease it.
VOLUME KNOBDISTORTION CIRCUIT
on/off Switch with LED
indicator
GAIN KNOB
Convenient Top Loading
Battery Door
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
CONTROLS
•VOLUMEknobcontrolsoverall
effectvolume
•GAINknobcontrolsoverallamount
of distortion
•DISTORTIONswitchtogglesdistortion
effecton/off(redLEDindicateson)
•FOOTSWITCHtogglespedalon/off
(blueLEDindicateson)
SPECIFICATIONS
Impedance
Input 1MΩ
Output 4.7kΩ
Nominal Input -8dBV
Max Output +7dBV
Noise Floor
*
<-94dBV
Center Freq. (f
c
)
HeelDown 270Hzto370Hz
ToeDown 1.5kHzto1.9kHz
Max Gain at f
c
20 dB
Bypass TrueHardwire
Current Draw 18mA
Power Supply 18 volts DC
*A-weighted, distortion off.