Thrustmaster 4460133 4469021 4468007 4460134 Owner's manual

                 
ENGLISH: Manual firmware update procedure 
 
FRANÇAIS : Procédure de mise à jour manuelle du firmware 
 
DEUTSCH: Anleitung zur manuellen Aktualisierung der Firmware  
 
NEDERLANDS: Procedure handmatig bijwerken firmware 
 
ITALIANO: Procedura di aggiornamento manuale del Firmware 
 
ESPAÑOL: Procedimiento manual de actualización del firmware 
 
РУССКИЙ: Процедура обновления прошивки вручную

ENGLISH: Manual firmware update procedure

(Windows 7 / 8 / 8.1 / 10)

1. Install the drivers

“PC - DRIVERS FORCE FEEDBACK”:

https://support.thrustmaster.com/en/product/txracingwheel-en/

During this procedure:

- DO NOT CONNECT the TX wheel to your PC before being prompted to do so.

- The wheel must be connected directly to the computer’s USB port. We recommend

that you do not use a USB hub for this procedure.

- DO NOT CLICK in any Windows dialog boxes which may appear during the update.

2a. Windows 8 / 8.1 / 10

From the Start menu, start typing the words Firmware Update. This will bring up the Search function,

giving you access to the Firmware application:

It is also available under Apps > Thrustmaster:

2b. Windows 7

Once the procedure is complete, in the Start > All Programs > Thrustmaster > FFB Racing wheel

menu, click on Firmware Update.

3.

- The Thrustmaster TX Racing Wheel is listed in the Device section.

The version of the firmware currently found in the device is displayed.

- The Firmware section displays information regarding the version of the firmware that will be applied to

the device.

Thrustmaster TX Racing Wheel – Ver: 54.00

Ver: 55.00 (21/10/2019) – TX_LM4F_v55.tmf

Thrustmaster

Firmware Updater (2.9.0)

Thrustmaster

Firmware Updater

4. In order to proceed with the firmware update, the wheel must be put in BOOTLOADER mode

manually. Click OK and follow the onscreen instructions.

- Remove the USB plug from the computer.

- Simultaneously press buttons YELLOW and XBOX Guide (located on the racing wheel’s base),

then connect (without releasing YELLOW + XBOX GUIDE) the USB plug to the PC.

Upon reconnecting the wheel, you should notice that a Bulk driver has been installed.

This driver is required for the update process.

Once installed, the Device section should now indicate the boot state of the wheel.

When you are ready to continue, click OK.

IMPORTANT:

DO NOT UNPLUG your wheel from the USB port, and

DO NOT DISCONNECT the wheel’s power supply during the firmware update procedure.

[BOOT] TX Racing Wheel – Ver: 54.00

The firmware update procedure begins (the update progress is displayed onscreen).

During the firmware update, the MODE LED on the wheel will be OFF: this is perfectly

normal.

The update program will inform you as to whether the firmware has been successfully updated.

If the firmware has been successfully updated, the wheel will automatically calibrate itself, and the

MODE LED will return to its original state.

Thrustmaster

Firmware Updater (2.9.0)

Thrustmaster

Firmware Updater (2.9.0)

Thrustmaster

Firmware Updater

Thrustmaster

Firmware Updater

4. Click OK to return to the update program’s main window and confirm that the firmware version

displayed in the Device section is now 55.

Click on to exit the program.

If the firmware update procedure has failed or if an error message is displayed, please contact

Thrustmaster technical support, who will guide you through the entire process to follow.

Congratulations! You are now ready to play!

Once the firm ware has been successfully updated, verify that the wheel is functioning

properly by selecting the “Control Panel” menu.

Thrustmaster TX Racing Wheel – Ver: 55.00

Firmware: 55.00

Page is loading ...

Thrustmaster 4460133 4469021 4468007 4460134, 2960759 2969096 2961060 2968039, 4060068 4069010 4060072 Owner's manual

Related papers

Other documents