X Rocker 5164401 User manual

Steering Wheel instructions

for Xbox One

1. Connect the XR Racing Wheel to the Xbox One

2. Connect the XR Racing Wheel pedals to the Racing Wheel

3. Ensure that your Xbox One controller has previously synced to the Xbox One and

is turned OFF

4. Ensure that the Steering wheel is not displaying a red light, press and hold the

PS button to turn this off

5. Connect the Xbox One controller to the XR Racing Wheel, this should then auto-

matically connect.

NOTE: You may have to re-sync your Xbox One controller to the Xbox One Console

when using it after disconnecting the controller from the XR Racing Wheel.

To adjust sensitivity.

- Press and hold the SEN button until the lights ﬂash between red/blue.

- Press up and down on the DPAD to adjust the sensitivity.

- Press the SEN button once again to set.

This manual is also suitable for

Download PDF