LG LSN5AR2M Owner's manual
- Category
- Mobile air conditioners
- Type
- Owner's manual
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WALL MOUNTED
LG Electronics India Pvt. Ltd.
Registered Office : A-27, Mohan Cooperative
Industrial Estate, Mathura Road, New Delhi-110044
www.lg.com
P/No. MFL39754859
(Recommended 24°C is suitable for human body)
(Refer page no. 20 and 21 for details)
Disposal of your old appliance (as per e-waste Rules)
vius iqjkus midj.k dk fuiVku ¼bZ&vif’k"V ds vuqlkj½fu;e
1. When this crossed out wheeled bin symbol is depicted
on the product and its operator’s manual, it means the
product is covered by the e-waste Management and
Handling Rules , 2011 and are meant to be recycled,
dismantled, refurbished or disposed off.
2. Dos
a. The product is required to be handed over only to the
authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/un-
repairable so as top revent its accidental breakage.
Don’t
a. The product should not be opened by the user himself/herself, but only
by authorized service p e rsonnel.
b. The product is not meant for re-sale to any unauthorized
agencies/scrap dealer/ kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed
area.
3. Any disposal through unauthorized agencies/person will attract action
under Environment (Protection) Act 1986 .
4. Hazards of improper handling or accidental breakage
a.
b.
5. To locate a nearest collection centre or call for pick-up (limited area only)
for disposal of this appliance, please contact Toll Free No.1800-180-
9999 for details. All collection centre and pick up facilities are done by
third parties with LG Electronics India Pvt. Ltd. merely as a facilitator.
For more detailed information , please visit : http://www.lge.com/in
If batteries are disposed incorrectly, it can greatly harm the
environment. The chemical by-products are hazardous.T he metals
and chemicals found in batteries can mix into soil which may be
hazardous to humans, plants and animals. If thrown in fire, they can
cause blast and release toxic gases which may be harmful for health.
The refrigerant (R-22) used can be combustible at low pressure. The
potential health effects of over exposure isd izziness, headache and
heart irregularities
1- tc bl dkVs x;s ifg;s okys fcu dk fpº+u fdlh midj.k vkSj
blds vksisjVj dh iqfLrdk ds lkFk layXu gksrk gSa rks bldk
eryc gS fd bls "bZ&vif'k"V" ¼izca/ku vkSj gFkkyu½ fu;e 2011
ds vUrxZr lfEefyr fd;k x;k gS] vkSj bls uohuhdj.k] fo?kVu
vkSj fuiVku ds fy, cuk;k x;k gSA
2- djsa&
d& midj.k dks flQZ vf/kd`r iqu% uohuhdj.kdrkZ dks gh
fuiVkj.k djus gsrq gLrkarfjr djsaA
[k& tc midj.k dk;Zjr u gks bls vyx {ks= esa j[kas rkfd midj.k ls gksus okyh
nq?kZVukvks ls cpk tk ldsA
uk djsa&
d& bl midj.k dks Lo;a/[kqn ugha [kksyuk pkfg, midj.k dks dsoy vf/kd`r
!
vf/kdkjh ds }kjk gh [kksyk tkuk pkfg,A
[k&bl midj.k dks iqu% fcØh ds fy, fdlh Hkh dckM+hokyk@Hkaxkj
okyk@vukf/kd`r laLFkk dks u nsaA
x& bl midj.k dks fdlh ?kjsyw vif'k"V lkeku ds lkFk feykdj u j[ksaA
?k& midj.k ds cnys gq, ;k vkrafjd iqjtks dks [kqys {ks= esa u j[ksaA
3- ;fn fdlh vukf/kd`r foHkkx ;k O;fDr ds }kjk fuiVkj.k fd;k tkrk gS rks ;g
i;kZoj.k ¼lqj{kk½ /kkjk 1986 ds vUrxZr vkrk gSA
4- nq?kZVukxzLr VwV@QwV rFkk vO;ofLFkr j[k&j[kko ls cps A
d& ;fn cSVfj;ksa dk fuiVkj.k v'kq) :i ls dj jgs gaS] rks ;g okrkoj.k dks cgqr
uqdlku igqqWpk ldrk gSaA jklk;fud midj.k [krjukd gksrs gaSA tks jlk;u vkSj
/kkrq cSVfj;ksa esa ik, tkrs gaS] bls feV~Vh esa feykus ij ;g euq";ksa] ikS/kksa vkSj i'kqvksa ds
fy, [krjukd gks ldrh gaSA ;fn bls vkx esa Qsadrs gaS rks ;s foLQksV dj ldrh gaS
vkSj ;s tgjhyh xSlsa ns ldrk gS tks LokLF; ds fy, gkfudkjd gaSA
[k& jsÝhtjsaV ¼R-22½ de ncko ij ngu'khy gks ldrh gaS rFkk blls LokLF; ij
nqLizHkko iM+ ldrk gS tSls pDdj vkuk] flj nnZ vkSj g`n; xfr :dukA
5- mijksDr inkFkksZ ds fuiVkju ds fy, utnhdh fuiVkju laLFkku ¼ladh.kZ {ks=½ esa dkWy
djsaA vf/kd tkudkjh ds fy, gekjs Vksy Ýh uEcj 1800-180-9999 ij dkWy djsaA
lHkh laxzg.k dsUnz o fid&vi dh lqfo/kk,a FkMZ&ikVhZ ls tks "LG Electronics
India Pvt. Ltd" dks viuh lsok,a iznku dj jgh gksa] ls djok,aA
vf/kd tkudkjh ds fy, ns[ksa osclkbV % http://www.lge.com/in
– Prior to operation
Components
Electrical Safety
Using the remote control
–
–
–
Inserting Batteries
Installing the remote control holder
Wireless Remote Control
BASIC FUNCTIONS
13
Cooling your room
Heating your room
Removing humidity
Airing your room
Adjusting the fan speed
Adjusting the air flow direction
Setting the timer
– Setting the current time
– Turning on the air conditioner
automatically at a set time
– Turning off the air conditioner
automatically at a set time
– Cancelling the timer setting
Setting sleep mode
ADVANCED FUNCTIONS
16
Changing room temperature quickly
Air purification mode
Indoor air purification
– Auto Clean operation
Auto operation
Quiet Mode (optional)
Energy Saver mode
Dimmer
Operating the air conditioner without the
remote control
Restarting the air conditioner automatically
MAINTENANCE
21
– Cleaning the air filter
– Cleaning the anti-allergy filter
and triple filter
– Cleaning the plasma filter
TROUBLESHOOTING
23
– Self-diagnosis function
– Before requesting service
• Contact the authorized service technician for repair or
maintenance of this unit.
• Please install your air-conditioner by company
authorised service franchisee / authorised service
and sales dealer.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only,
using only genuine replacement parts.
We recommend usage of voltage stabilizer with
high / low voltage cut off in areas having voltage
fluctuations.
AC TONNAGE STABILIZER KVA
(3-STEP STABILIZER)
1.0
1.5
2.0
3
4
5
PRECAUTION
Cleaning the Micro Protection filter.
–
Prior to Operation
Preparing for Operation
1. Contact an installation specialist for
installation.
2. Plug in the power plug properly.
3. Use a dedicated circuit.
4. Do not use an extension cord.
5. Do not start/stop operation by plugging/
unplugging the power cord.
6. If the cord/plug is damaged, replace it
with only an authorized replacement part.
Usage
1. Being exposed to direct airflow for a long
time may be hazardous to your health. Do
not expose occupants, pets, or plants to
direct airflow for a long time.
2. Due to the possibility of oxygen
deficiency, ventilate the room when using
the appliance together with stoves or
other heating devices.
3. Do not use this air conditioner for non-
specified special purpose (e.g. preserving
precision devices, food, pets, plants, or
art objects). Such use may damage your
p ro p e r t i e s . o n l y an au t h o r i z e d
replacement part.
Cleaning and Maintenance
1. Do not touch the metal parts of the unit
when removing the filter. Injury can occur.
2. Do not use water to clean inside the air
conditioner. Exposure to water can
destroy the insulation, leading to electric
shock.
3. When cleaning the unit, first make sure
that the power and breaker are turned off.
The fan rotates at a very high speed
during operation. There is a possibility of
injury if the unit’s power is triggered while
Service
For repair and maintenance, contact your
authorized service dealer.
Components
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the
air conditioner.
This symbol indicates special notes.
Air Intake Vents
Air Outlet Vents
Connecting
Wires
Piping
Drain Hose
Base Plate
Indoor unit
Outdoor unit
This appliance should be installed in accordance with national wiring regulations. This guide acts as a
guide to help to explain product features.
Front Panel
Air Filter
Air Inlet
Signal Receptor
Notice
WARNING
Features
Electrical Safety
•
This appliance must be properly grounded.
To minimize the risk of electric shock, you must always plug into a grounded outlet.
•
Do not cut or remove the grounding.
•
Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the
appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded
through the house wiring.
•
If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle
and circuit checked by a qualified electrician.
WARNING
Using the remote control
Using the remote control
You can operate the air conditioner more conveniently with the remote control.
Wireless remote control
Display
Screen
Control
Panel
M’SOON
FAN
2
Used to circu-
Air Circulation buttonAir Circulation button
late the room air without cooling or
heating.
Sets the
sleep mode auto operation.
Ad-
justs the room temperature when cool-
ing and heating.
fan speed.
air flow direction.
Temperature display button
Display
the start / end time
display ON or OFF.
-
AM
ON
OFF
Monsoon mode selection buttonMonsoon mode selection button
-
Use to remove access moisture.
M’SOON
A/CLEAN
Temperature display button
Display the
room temperature, The unit converses
from °C to °F or from °F to °C if Room
Temperature KEY is pressed for 5 seconds
Turn indoor unit
controller settings.
remote
12
BASIC FUNCTIONS
Cooling your room
(Cooling operation)
1
Press to turn on the power.
Press repeatedly to select the cooling
2
operation.
- is displayed on the display screen.
3
Press or to set the desired tempera-
ture.
- The temperature range is 18°C - 30°C.
Heating your room
(Heating operation)
1 Press to turn on the power.
Press repeatedly to select the heating
2
operation.
- is displayed on the display screen.
3
Press or to set the desired tempera-
ture.
- The temperature range is 16°C - 30°C.
Removing humidity
(Monsoon operation)
This mode removes excess moisture from
environment with high humidity or in the rainy
season, in order to prevent mold from setting
in. This mode adjusts the room temperature
and the fan speed automatically to maintain
the optimal level of humidity.
1
Press to turn on the power.
2
Press to select the
monsoon operation.
- is displayed on the display screen.
NOTE
!
Cooling-only models do not support this
function.
M’SOON
2
NOTE
!
• In this mode you cannot adjust the room
temperature, as it is adjusted automati-
cally. Also, the room temperature is not
displayed on the display screen.
• In this mode indoor unit fan and outdoor
unit will be OFF intermittently.
• To Exit from Monsoon mode press
key or key or key
13
Adjusting the air flow direc-
tion
1
To adjust the direction of the flow verti-
cally, press change the air flow direc-
tion automatically.
- This function is apply for only turn On/Off.
2
To adjust the direction of the flow horizon-
tally, press change the air flow direc-
tion automatically.
- This function is apply for only turn On/Off.
Setting the timer
You can use the timer function to save energy
and to use the air conditioner more efficiently.
Setting the current time
1 Press and hold it for longer than 3 sec-
onds.
- The AM/PM icon flickers at the bottom of
the display screen.
NOTE
!
• Adjusting the air flow direction horizon-
tally may not be supported, depending
on the model.
• Adjusting the air deflector arbitrarily may
cause product failure.
• If you restart the air conditioner, it starts
to operate with the previously set direc-
tion of air flow, so the air deflector may
not match the icon displayed on the re-
mote control. When this occurs, press
or to adjust the direction of the
air flow again.
Airing your room
(Air Circulation operation)
This mode only circulates the indoor air
without changing the room temperature.
3
Press to adjust the fan speed.
Adjusting the fan speed
1 Press repeatedly to adjust the fan
speed.
- Select if you want natural air.
The fan speed adjusts automatically.
Natural wind (CHAOS Logic)
For fresher feeling, press the INDOOR FAN
SPEED SELECTION BUTTON and set to
Natural wind mode.
In this mode, the wind blows like a natural
breeze by automatically changing fan speed.
2
is displayed on the display screen.
1
Press to turn on the power.
Fan button : Press
2
turn on the air circu-
lation operation.
-
FAN
14
2 Press or to select .
3
Press to finish.
Turning on the air conditioner auto-
matically at a set time
1 Press
- The icon below flickers at the bottom of
the display screen.
2
Press
or to select
3
Press to finish.
4
When setting the timer, current time and
times.
ON icon are displayed on the display
screen indicating that the ON TIMER is
set.
Turning off the air conditioner auto-
matically at a set time
1 Press
- The icon below flickers at the bottom of
the display screen.
2
Press
or to select
3
Press to finish.
4
When setting the timer, current time and
the times.
OFF icon are displayed on the display
screen indicating that the OFF TIMER is
set.
Canceling the timer setting
1 Press or to select the timer setting
to cancel.
2
Press
- To cancel all timer settings, press
Setting sleep mode
Use the sleep mode to turn off the air condi-
tioner automatically when you go to sleep.
1
Press to turn on the power.
2
Press
3
Press
or to select the hour
(up to 7 hours).
4
Press to finish.
- is displayed on the display screen in
sleep mode.
desired time.
desired time.
desired time.
This mode does not have auto restart
feature.
(The timer lamp on the air conditioner and
the display will go off.)
The slee p mode will operate indoor fan at
super low speed in cooling mode and at low
speed in heating mode for pleasant slee p
In cooling mode o r Monsoon mode
The settin g te mperatu re will ris e automatic ally
two tim es by 1°C over n ext consecutiv e 3 0
minutes (Maxim um 2°C) fo r a c omfortable
sleep.
This will be th e fin al settin g te mpera ture as
long as sle ep mode is fu nctio ning.
Afte r comple tio n o f set tim e unit will s witc h
OFF automatic ally.
2
15
ADVANCED FUNCTIONS
The air conditioner offers some additional ad-
vanced functions.
Changing room temperature
quickly
Jet Cool(Jet Mode)
This mode allows you to cool indoor air quickly
in summer or warm it quickly in winter.
1
Press to turn on the power.
2
Press .
- In jet cooling mode, 30 minutes strong air
blows out for faster cooling.
In jet heating mode, 30 minutes strong air
blows out for faster heating.
2
Indoor air purification
Auto Clean operation
In the cooling and monsoon operations,
moisture is generated inside the indoor unit.
Use the auto cleaning function to remove
such moisture.
2
Press
- is displayed on the display screen.
Press to turn on the power.
1
2
- If you turn off the power, the fan oper-
ates for 30 minutes and cleans the inside
of the indoor unit.
2
NOTE
!
Some buttons cannot be used while the
auto cleaning function is in operation.
During Auto Clean function, “Co” will
be displayed on the unit.
Power saving lamp blink depending
on the model.
Energy saving cooling mode
This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable en-
vironment.
The temperature automatically sets at
22°C if ambient temperature is below
22°C.
The temperature maintains if ambient temper-
ature is above 22°C
1
Press to turn the power on.
2
Press repeatedly to select the cooling
operation.
3
Press
- is displayed on the display screen.
!
This function may not be supported,
depending on the model. In Energy Saving
Cooling Mode, temperature on the display
of the remote controller and air condi-
tioner can be different.
NOTE
This mode does not have auto restart
feature.
2
16
ADVANCED FUNCTIONS
Auto operation (Optional)
(Artificial inelligence)
Press to turn on the power.
1
Press repeatedly to select auto operation.
2
Press
3
or to select the desired oper-
ation code if the temperature is higher or
lower than the desired temperature.
Code Description
2 Cool
1 Cool slightly
0 Maintain
room
temperature
-1 Heat slightly
-2 Heat
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.
This operation is basically heating or cooling
function of the air conditioner. But during this
operation the controller change the operation
mode automatically to keep the temperature
within ±2°C with respect to the setting
temperature.
Dimmer (Optional)
1.
2.
Make sure that remote & Air conditioner are ON.
In Dimmer Mode Unit Display will be turned OFF
completely but system will be in running state.
Dimmer Mode will be cancelled if any key
except is pressed
(Power Key will turn OFF the Unit.
This function may not be supported by
Auto Restart feature (depending on
selected models.)
Press to activate/deactivate dimmer function.
2
Auto Changeover
(Optional)
Press to turn on the power.
1
Press repeatedly to select auto operation.
2
Press
3
or to select the desired oper-
ation code if the temperature is higher or
lower than the desired temperature.
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.
this operation is basically heating or cooling
function of the air conditioner. But during this
operation the controller change the operation
mode automatically to keep the temperature
within ±2°C with respect to the setting
temperature.
2
Cooling-only models Heat pump models
ºC/ºF Conversion
The units converse from Celsius to Fahrenheit
(ºC to ºF) or Fahrenheit to Celsius (ºF to ºC) if
Room Temp KEY is pressed for 5 seconds.
The remote controller to be point towards
the signal receiver of the air conditioner to
converse from Celsius to Fahrenheit
(°C to °F) or Fahrenheit to Celsius
F C on both Indoor and remote
controller.
(° to ° )
17
ADVANCED FUNCTIONS
Open the front
panel upward
ON/OFF
button
(Forced Operation)
Heat pump Model
Cooling Model
Room Temp. ³ 24°C 21°C ³ Room Temp. < 24°C Room Temp. < 21°C
Operating mode Cooling Cooling Healthy Dehumidification Heating
Indoor FAN Speed
High High High High
Setting Temperature
22°C 22°C 23°C 24°C
If you want to stop the unit, re-press the power button.
8
Open the front
panel upward
ON/OFF
button
restart (Optional)
ADVANCED FUNCTIONS
18
Micro Protection filter
Micro Protection filter.
1
Use soap solution to clean the heat exchanger
coils and the panel vents (consult with technician).
MAINTENANCE
19
Plz do not press the
mesh with finger as
shown above
Caution :
MAINTENANCE
20
Cleaning the Micro Protection Filter
(Optional)
Cleaning the Micro Protection Filter
(Optional)
cleaning the Micro Protection Filter
Micro Protection Filter.
We suggest changing the Micro Protection
Filter every 6 months.
- Do not wash the Micro Protection Filter
with water because the filter can be
damaged.
,
For more filters, Please contact the
LG service center.
(Refer to the warranty card.)
The location of the filters may differ,
depending on the model.
The feature can be changed according to
type of model.
(Side)
(Rear)
Air intake
vents
Air outlet
vents
Piping
Drain Hose
(Side)
(Rear)
Air intake
vents
Air outlet
vents
Piping
Drain Hose
(Side)
(Rear)
Air intake
vents
Air outlet
vents
Piping
Drain Hose
The heat exchanger coils and panel vents of the outdoor unit should
be checked regularly. If clogged with dirt or soot, the heat exchanger
and panel vents may be professionally steam cleaned.
Dirty or clogged coils will reduce the operating efficiency of the system and
cause higher operating costs.
NOTICE
Outdoor Unit
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
LG LSN5AR2M Owner's manual
- Category
- Mobile air conditioners
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
LG LSN3AR3M1 Owner's manual
-
-
-
-
-
-
-
LG 32LV3500 Owner's manual
-
-
