1. Windows device update
Confirm your stylus driver is up to
date.
Go to: www.wacom.com/inkgo
2. Install the battery.
Please make sure to install the
battery “–” side up.
a. b. c. d.
3. Side-switches
Your side-switches are set as below.
A: Right click
B: Eraser * depending on apps.
A
B
4. Changing the protocol setting
Press 2 seconds
If the stylus does not work on your
device, press and hold both side-
switches at the same time for 2
seconds to change the setting.
Get started with your Bamboo Ink
English