X1

Mode X1, Neffox X1, X1 Version 1 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Mode X1 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CONTENTS
English
Deutsch
Español
Eλληνικά
Français
Italiano
Português
1
5
9
13
17
21
25
1
4
5
2 3 9
6
10
11
7
8
Rear camera
Fingerprint
identification sensor
Front camera
Ring/silent switch Two-tone flash
SIM card tray
Volume buttons
Power button
Charging/data port Earpiece
Headphone jack
1
2
3
4
5
6
7
8
9
10
11
First glance
1 2
English
Eject the SIM card tray by inserting a SIM
ejector pin provided into the hole on the
tray. Place the the SIM card(s) into the tray
with the gold contacts face down and then
insert the tray back into the phone.
Put in the cards
1 2 3
English
If there's only one SIM card in the phone, it's
ready to use.
With two SIM cards inserted, you can choose
to use one or both of them:
Go to Settings > SIM cards and tap the
on/off button to enable or disable SIM1 or
SIM2.
Dual SIM phone settings
2 3 4
English
1
SIM 1
SIM 1
2
SIM 2
SIM 2
SIM cards
Go to Settings > Fingerprint and
encryption > Fingerprint and follow the
onscreen instructions to register your
fingerprint.
When recording your fingerprint, make sure
the fingerprint sensor and your fingers are
dry and clean.
Fingerprint identification
3 4
English
Unlock phone
Lock apps
Take pictures
1
7110500266 REV1.0.1
©2016 TP-LINK
/