Page is loading ...
3
LEGAL INFORMATION
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form
or by any means, electronic or mechanical,
including photocopying and microlm,
without the prior written permission of ZTE
Corporation.
Notice
ZTE Corporation reserves the right to make
modications on print errors or update
specications in this guide without prior
notice.
We offer self-service for our smart terminal
device users. Please visit the ZTE ofcial
website (at www.ztedevice.com) for more
information on self-service and supported
product models. Information on the website
takes precedence.
Visit http://www.ztedevice.com to download
the user manual. Just click Support >
Manuals from the home page and then
select your location, product type, and name
to search for related support information.
4
Disclaimer
ZTE Corporation expressly disclaims any
liability for faults and damages caused by
unauthorized modications of the software.
Images and screenshots used in this guide
may differ from the actual product. Content in
this guide may differ from the actual product
or software.
Trademarks
ZTE and the ZTE logos are trademarks of
ZTE Corporation.
Google and Android are trademarks of
Google, Inc.
The Bluetooth
®
trademark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such trademarks by ZTE Corporation
is under license.
microSDHC Logo is a trademark of
SD-3C, LLC.
Other trademarks and trade names are the
property of their respective owners.
Version No.: R1.0
Edition Time : March 29, 2016
5
Getting to Know Your Phone
Proximity &
light sensor
Front camera
nano-SIM /
microSDHC
card slot
Power key
Menu key
Back camera
Fingerprint
sensor
Microphone
Charging/
micro-USB
jack
Speaker
Back ash
Home key
Back key
Touch screen
Volume key
Earpiece
Front ash
Headset jack
6
Installing the nano-SIM Card(s)
and the microSDHC™ Card
WARNING!
To avoid damage to the phone, do not use
any other kind of SIM cards, or any non-
standard nano-SIM card cut from a SIM card.
You can get a standard nano-SIM card card
from your service provider.
Slot1 Slot2
7
NOTE:
Slot 1 only supports nano-SIM card. Slot
2 supports nano-SIM card or microSDHC
card.
The two nano-SIM slots support 4G/3G/
2G networks. When one nano-SIM card
is set to connect with 4G/3G networks,
the other installed nano-SIM card can
only connect with 2G networks.
Charging the Phone
Your phone’s battery should have enough
power for the phone to turn on, nd a signal,
and make a few calls. You should fully charge
the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and cables.
The use of unapproved accessories could
damage your phone or cause the battery to
explode.
CAUTION:
Do not change the built-in rechargeable
battery in your phone by yourself. The
battery can only be changed by ZTE or ZTE
authorised service provider.
8
NOTE:
If the screen freezes or takes too long to
respond, try pressing and holding the Power
key for about 10 seconds to power off the
phone, then press the Power key to start.
Product Safety Information
Don’t make or receive phone
calls while driving. Never text
while driving.
Keep your phone at least 15
mm away from your ear or body
while making calls.
Small parts may cause choking.
Your phone can produce a loud
sound.
9
To prevent possible hearing
damage, do not listen at high
volume levels for long periods.
Avoid contact with anything
magnetic.
Keep away from pacemakers
and other electronic medical
devices.
Turn off when asked to in
hospitals and medical facilities.
Turn off when told to on aircraft
and at airport.
Turn off when near explosive
materials or liquids.
Don’t use at gas stations.
Your phone may produce a
bright or ashing light.
Don’t dispose of your phone in
re.
Avoid extreme temperatures.
Avoid contact with liquids. Keep
your phone dry.
Do not attempt to disassemble
your phone.
10
Only use approved accessories.
Don’t rely on your phone as a
primary device for emergency
communications.
Specic Absorption Rate (SAR)
Your mobile device is a radio transmitter
and receiver. It is designed not to exceed
the limits for exposure to radio waves
recommended by international guidelines.
These guidelines were developed by the
independent scientic organization ICNIRP
and include safety margins designed
to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement
known as Specic Absorption Rate, or
SAR. The SAR limit for mobile devices is
2 W/kg and the highest SAR value for this
device when tested at the head was 0.467
W/kg* and when tested at the body was
0.530 W/kg*.
11
As SAR is measured utilizing the device’s
highest transmitting power, the actual SAR of
this device while operating is typically below
that indicated above. This is due to automatic
changes to the power level of the device
to ensure it only uses the minimum power
required to communicate with the network.
Declaration of RoHS Compliance
To minimize the environmental impacts
and take more responsibilities to the earth
we live on, this document shall serve as a
formal declaration that ZTE BLADE V7 LITE
manufactured by ZTE CORPORATION is in
compliance with the Directive 2011/65/EU of
the European Parliament - RoHS (Restriction
of Hazardous Substances) with respect to
the following substances:
1. Lead (Pb)
2. Mercury (Hg)
3. Cadmium (Cd)
4. Hexavalent Chromium (Cr (VI))
5. Polybrominated biphenyls (PBBs)
6. Polybrominated diphenyl ethers (PBDEs)
ZTE BLADE V7 LITE manufactured by ZTE
CORPORATION meets the requirements of
Directive 2011/65/EU.
12
Disposal of Your Old Appliance
1. When this crossed-out
wheeled bin symbol is
attached to a product,
it means the product
is covered by the
European Directive
2012/19/EU.
2. All electrical and
electronic products
should be disposed
of separately from
the municipal waste
stream via designated
collection facilities
appointed by the
government or the
local authorities.
3. The correct disposal
of your old appliance
will help prevent
potential negative
consequences for
the environment and
human health.
For this product’s recycling information based
on WEEE directive, please send an e-mail to
13
EC DECLARATION OF
CONFORMITY
It is hereby declared that following designated
product:
Product Type: LTE/WCDMA/GSM Multi-
Mode Digital Mobile Phone
Model No: ZTE BLADE V7 LITE ; ZTE
BLADE V0720
Product Description: LTE/WCDMA/GSM
Multi-Mode Digital Mobile Phone
Complies with the essential protection
requirements of Directives on Radio and
Telecommunication Terminal Equipment
(Directive 1999/5/EC), Restriction of the
Certain Hazardous Substances in electrical
and electronic equipment (Directive 2011/65/
EU), Eco-design Requirements for Energy-
Related Products (Directive 2009/125/EC)
and their amendments.
This declaration applies to all specimens
manufactured identical to the samples
submitted for testing/evaluation.
Assessment of compliance of the product
with the requirements relating to Directive
1999/5/EC was performed by PHOENIX
TESTLAB GmbH (Notied Body No.0700)
14
and assessment of compliance of the product
with the requirements relating to Directive
2011/65/EU was performed by Intertek
Testing Services Ltd., Shanghai and Directive
2009/125/EC was performed by Shenzhen
Zoom Rel Testing Technology Co.,Ltd. The
assessments were based on the following
regulations and standards:
Requirement Standard
Health and
safety
EN 50332-1:2000;
EN 50332-2:2003
EN 50566:2013/AC:2014;
EN 50360:2001+A1:2012
EN 62209-1:2006;
EN 62209-2:2010;
EN 62479: 2010
EN 60950-1:2006+A11:2009+
A1:2010+A12:2011+A2:2013
EMC
EN 301 489-1 V1.9.2;
EN 301 489-3 V1.6.1;
EN 301 489-7 V1.3.1;
EN 301 489-17 V2.2.1;
EN 301 489-24 V1.5.1
Radio
Spectrum
EN 301 908-1 V7.1.1;
EN 301 908-2 V6.2.1;
EN 301 908-13 V6.2.1;
EN 301 511 V9.0.2
EN 300 328 V1.8.1;
EN 300 440-1 V1.6.1
EN 300 440-2 V1.4.1
15
RoHS IEC 62321:2008+2013+2015
ErP (EC) No 278/2009
This declaration is the responsibility of the
manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-Tech
Industrial Park, Nanshan District,
Shenzhen, Guangdong, 518057,
P.R.China
Authorised person signing for the company:
Yao Cuifeng Quality Director of ZTE
Corporation
Name in block letters & position in the
company
Shenzhen, 29
th
March 2016
Place & date Legally valid signature
This equipment may be
operated in:
AT BE
CY CZ DK EE FI FR
DE GR HU IE IT LV
LT LU MT NL PL PT
SK SI ES SE GB IS
LI NO CH BG RO TR
/
