LG LCD5500-BP Owner's manual

Brand: LG

Model: LCD5500-BP

Category: Supplementary music equipment

Type: Owner's manual

LG LCD5500-BP is a high-resolution, high-sensitivity color video camera with a wide range of capabilities that make it ideal for use in a variety of video surveillance applications. With its 1/3 Type Exview Super HAD CCD II sensor, the LCD5500-BP can capture clear, detailed images even in low-light conditions. The camera also features a smart motion detector that can be used to trigger recording or send alerts when motion is detected. Additionally, the LCD5500-BP supports Wide Dynamic Range (WDR), which helps to improve image quality in scenes with both bright and dark areas.

OWNER'S MANUAL

Color Video Camera

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

LCD5500-BN

LCD5500-BP

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead

symbol within an equilateral triangle is

intended to alert the user to the presence

of uninsulated dangerous voltage within

the product’s enclosure that may be of

sufficient magnitude to constitute a risk

of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and maintenance

(servicing) instructions in the literature

accompanying the product.

FCC WARNING: This equipment may generate or use radio

frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the

modifications are expressly approved in the instruction

manual. The user could lose the authority to operate this

equipment if an unauthorized change or modification is

made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment

is operated in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference

to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

• A suitable conduit entries, knock-outs or glands shall

be provided in the cable entries of this product in the

end user.

• Caution: Danger of explosion if battery is incorrectly

replaced. Replaced only with the same or equivalent

type recommended by the manufacturer. Dispose

of used batteries according to the manufacturer’s

instructions.

• Holes in metal, through which insulated wires pass,

shall have smooth well rounded surfaces or shall be

provided with brushings.

This Class A digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe A est conforme à la

norme NMB-003 du Canada.

Warning: Do not install this equipment in a confined space

such as a bookcase or similar unit.

Warning: Wiring methods shall be in accordance with the

National Electric Code, ANSI/NFPA 70.

Warning: This is a class A product. In a domestic

environment this product may cause radio interference

in which case the user may be required to take adequate

measures.

Warning: To reduce a risk of fire or electric shock, do not

expose this product to rain or moisture.

Caution: This installation should be made by a qualified

service person and should conform to all local codes.

Caution: To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel only.

Caution: The apparatus shall not be exposed to water

(dripping or splashing) and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

To disconnect power from mains, pull out the mains

cord plug. When installing the product, ensure that the

plug is easily accessible.

Disposal of your old appliance

All electrical and electronic products

should be disposed of separately from the

municipal waste stream via designated

collection facilities appointed by the

government or the local authorities.

2. The correct disposal of your old

appliance will help prevent potential

negative consequences for the

environment and human health.

3. For more detailed information about

disposal of your old appliance,

please contact your city office, waste

disposal service or the shop where you

purchased the product.

4. EEE Compliance with Directive.

(for Turkey only)

LG Electronics hereby declares

that this/these product(s) is/are

in compliance with the essential

requirements and other relevant

provisions of Directive 2004/108/EC

and 2011/65/EU.

European Standards Centre:

Krijgsman 1, 1186 DM Amstelveen The

Netherlands

• Please note that this is NOT a Customer Service

contact point. For Customer Service Information, see

Warranty Card or contact the dealer that you pur-

chased this product.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Important Safety Instructions

Power Supply

This camera must always be operated DC 12 V or AC 24 V.

Certified/Listed Adaptor which comply with LPS.

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be

cautions not to get combustible or metallic material inside

the body. If used with foreign matter inside, the camera is

liable to fail or to get cause of fire or electric shock.

• Remove dust or dirt on the surface of the lens with a

blower.

• Use a dry soft cloth to clean the body. If it is very dirty,

use a cloth dampened with a small quantity of neutral

detergent then wipe dry.

• Avoid the use of volatile solvents such as thinners,

alcohol, benzene and insecticides. They may damage

the surface finish and/or impair the operation of the

camera.

Operating and storage location

Avoid viewing a very bright object (such as light fittings)

during an extended period. Avoid operating or storing the

unit in the following locations.

• Extremely hot or cold places (operating temperature

-10 °C to 50 °C, however, we recommend that the unit

be used within a temperature range of 0 °C to 45 °C)

• Damp or dust place

• Places exposed to rain

• Places subject to strong vibration

• Close to generators of powerful electromagnetic radia-

tion such as radio or TV transmitters.

Cautions for Safe Operation

Features ............................................................................. 8

Accessories ..................................................................................8

Part Names and Functions .................................................... 9

Connections .................................................................... 11

Basic connection .....................................................................11

Installation ...................................................................... 12

Mounting the Camera ...........................................................12

Image Adjustment .................................................................14

Menu Operation.............................................................. 18

OSD Menu control buttons .................................................18

OSD Menu Overview ............................................................. 19

General Operation ..................................................................21

Exposure Settings ...................................................................22

White Balance settings .........................................................26

Day & Night Setting ...............................................................27

Motion Detection Setting ....................................................28

3D-DNR Setting .......................................................................29

Privacy Mask Setting .............................................................29

Special Menu Settings ..........................................................31

SYSTEM Setting .......................................................................35

Specication ................................................................... 36

Contents

This Color Video Camera is designed for installation in a

video surveillance system.

This manual contains instructions on how to install and

manage the Color Video Camera in your video surveillance

system.

Should you require any technical assistance, please contact

authorized service center.

• High resolution and high sensitivity with a 6 mm (1/3

Type)

Exview

Super HAD CCD II.

• Automatically switch between DC 12 V and AC 24 V.

• Smart motion detector.

• Wide Dynamic Range (WDR)

Accessories

Installation sticker

FRONT

PRODUCT CENTER POSITION

MEZ62687703

n100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

Fixing screws

FRONT

PRODUCT CENTER POSITION

MEZ62687703

n100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

Features

Part Names and Functions

a Dome Cover

b Lens Cover

c Focus lock lever

Fixes the focus position after adjusting.

d Zoom lock lever

Fixes the zoom position after adjusting.

e Rotate adjuster

f Lock button

You can lock the camera mounting bracket by using

the lock button.

g Tilting lock screw

Fixes the tilting position after adjusting.

h Setup menu control buttons

i Video Out connector

Use this jack for checking the picture with portable

monitor when install the camera.

Part Names and Functions

j Pan adjuster

Adjusts the pan position.

k Power input connector

Supplies AC 24 V or DC 12 V from an external power

source.

l Video output connector (BNC type)

m Camera mounting bracket

This bracket is supplied for ceiling installation.

Basic connection

The peripheral devices (DVR, monitor, etc.), AC/DC adapter

and cables are not supplied.

1. Make the video signal connection between the

camera and the monitor or DVR.

2. Connect a external power source to the power input

jack of the camera. (recommended power adapter is

AC 24 V/0.5 A, DC 12 V/0.5 A or above)

Connections

Mounting the Camera

Follow the instructions below to surface mount the camera

with supplied camera mounting bracket.

1. Use the installation guide template to check the

mounting location. Face the front of the label toward

the area of interest. Using the template as a guide,

make a hole through the ceiling.

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

2. Pass the connection cable through the inner side of

the ceiling.

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

Installation

3. Install the camera mounting bracket to the ceiling.

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

4. Connect the cables to the cable jacks of the camera

body.

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

Installation

5. Assemble the camera and mounting bracket after

align the front part of the camera and mounting

bracket. Connect the unit by following step a and

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

FRONT

PRODUCT CENTER POSITION

MEZ62687703

100 Cutting Line

4 Place

SELFTAPPING SCREW

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

Image Adjustment

You can manually adjust the pan/tilt/azimuth angles, focus,

and zoom while observing the connected monitor.

Notes:

• Do not hold the camera by lens unit to adjust panning,

tilting, or azimuth.

• The video output to the BNC will be interrupted while

a portable monitor is connected to the video jack.

1. Disassemble the Dome Cover from the main body

by turning it counterclockwise and detach the Lens

-cover.

TILT

PA N

ROTATE

WIDE

TELE

NEAR

FAR

Installation

2. Connect a portable monitor to the video jack.

TILT

PA N

ROTATE

WIDE

TELE

NEAR

FAR

3. Adjust the pan/tilt/rotate position of the camera.

TILT

PA N

ROTATE

WIDE

TELE

NEAR

FAR

Installation

4. Adjust the zoom.

4-1. Unlock the zoom lever.

4-2. Move the lever to adjust the zoom.

4-3. Lock the lever.

TILT

PA N

ROTATE

WIDE

TELE

NEAR

FAR

5. Adjust the focus.

5-1. Unlock the focus lever.

5-2. Move the lever to adjust the focus.

5-3. Lock the lever.

TILT

PA N

ROTATE

WIDE

TELE

NEAR

FAR

Installation

6. This camera utilizes an on-screen user MENU. To set

items on the menu, use the following buttons. After

then attach the lens cover and dome cover.

TILT

PA N

ROTATE

WIDE

TELE

NEAR

FAR

Note:

To disassemble the camera from the mounting bracket,

rotate the camera counterclockwise with pressing the

PUSH button inside the camera body.

Installation

OSD Menu control buttons

This camera utilizes an on-screen user MENU. To set items

on the menu, use the following buttons.

LEFT

RIGHT

SET

DOWN

• UP button:

Used to move upper direction on the menu screen.

Use this button to select an item or adjust the param-

eters.

• DOWN button:

Used to move lower direction on the menu screen. Use

this button to select an item or adjust the parameters.

• RIGHT button:

Moves the cursor to the right. Used to increment the

value selected in the menu. The parameter changes

each time this button is pressed.

• LEFT button:

Moves the cursor to the left. Used to decrement the

value selected in the menu. The parameter changes

each time this button is pressed.

• SET button:

Executes selections and displays a submenu for an

item with the mark.

Menu Operation

OSD Menu Overview

The following table shows the list of menu items and

options. You can adapt the camera to your requirements by

setting up the respective items in these menus.

Main

Sub Menu Contents

EXPOSURE ALC /ELC

BACKLIGHT OFF/WDR/BLC/HSBLC

BRIGHTNESS 0 to 100

AGC

OFF/LOW/MIDDLE/

HIGH

SHUTTER

1/120 000, ..., 1/160,

A.FLK, OFF, AUTO, x2,

..., x512

SENS-UP

OFF

AUTO

EXIT TOP/RET/END

WHITE BAL

ATW -

AUTO -

AWC / SET

KEY

MANUAL

RED -100 to 100

BLUE -100 to 100

EXIT TOP/RET/END

Main

Sub Menu Contents

DAY/NIGHT

AUTO

BURST ON/OFF

LEVEL LOW/ MIDDLE/ HIGH / USER

DWELL

TIME

3 SEC to 60 SEC

EXIT TOP/RET/END

DAY -

NIGHT

BURST ON/OFF

EXIT TOP/RET/END

MOTION

DET

OFF

AREA

SETUP

AREA

SELECTION

1 to 8

STATE ON / OFF

POSITION ,/ 0 to 7

POSITION ;. 0 to 5

SIZE ,/ 1 to 8

SIZE ,/ 1 to 6

EXIT

TOP/RET/

END

SENSITIVITY

0 to 100

DISPLAY OUTLINE,MASK1,MASK2,OFF

ALRAM

OUT

MESSAGE,OFF

EXIT TOP/RET/END

Menu Operation

Main

Sub

Contents

3D-DNR 0 to 100

PRIVACY

MASK

OFF -

RECTANGLE

MASK

SELECTION

1 to 8

DISPLAY

OFF,MOZAIC,

COLOR1 to COLOR 8

POSITION ,/ 2 to 98

POSITION ;. 2 to 98

SIZE ,/ 4 to 100

EXIT TOP/RET/END

CIRCLE

MASK

SELECTION

1 to 4

DISPLAY

OFF,MOZAIC,

COLOR1 to COLOR8

POSITION ,/ 0 to 100

POSITION ;. 0 to 100

SIZE ,/ 1 to 15

RADIOUS 1 to 100

EXIT TOP/RET/END

Main

Sub

Contents

PRIVACY

MASK

POLYGON

MASK

SELECTION

1 to 2

DISPLAY

OFF,MOZAIC,

COLOR1 to

COLOR 8

SHAPE -

POSITION -

EXIT TOP/RET/END

SPECIAL

D-ZOOM

OFF -

ZOOM x1.0 to x16.0

PAN -100 to 100

TILT -100 to 100

EXIT TOP/RET/END

D-EFFECT OFF / MIRROR / ROTATE / V-FILP

SHARPNESS 0 to 100

COLOR 0 to 100

SYNC INT / LL

USER TITLE ON / OFF

LANGUAGE

ENG/CHN/KOR/JAP/FRE/ITA/ESP/POR/DUT/GER/

POL/RUS/TUR/ARA/HEB

EXIT TOP/RET/END

Page is loading ...

LG LCD5500-BP Owner's manual

Brand: LG

Model: LCD5500-BP

Category: Supplementary music equipment

Type: Owner's manual

Download PDF

report

LG LCD5500-BP Owner's manual

LG LCD5500-BP Owner's manual

Related papers

Other documents