Siemens Cell Phone C62 User manual

Type
User manual
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2003
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
www.my-siemens.com
cyan magenta yellow black LIEBREICH, Medienproduktion
Be inspired
C62
BA C62.QXD 23.07.2003 17:57 Uhr Seite 1
Contents
1
This is a short version of User Guide. You
can download the detailed version from the
Internet at: www.my-siemens.com/c62
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:24)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_SquirrelTOC.fm
Safety precautions ...................... 2
Phone overview .......................... 4
Display symbols (selection) ........ 6
Getting started............................ 8
Insert SIM card/battery ............. 8
Charging the battery ................. 9
Switching on/off, PIN ................ 10
Switching on your phone for
the first time........................... 10
General information ................. 12
Security ..................................... 13
Codes .................................... 13
Clear SIM-card barring ............ 13
Making a phone call.................. 14
Handsfree............................... 15
Hold call ................................. 16
Conference............................. 16
Text entry.................................. 17
Addressbook ............................. 20
<New entry> .......................... 20
Call (search for an entry) ........ 21
Edit entry ............................... 21
Groups ................................... 21
Businesscard .......................... 22
SIM card entry ........................ 22
Records ..................................... 23
Durat/charges ........................ 23
Surf & fun.................................. 24
Internet browser (WAP) .......... 24
Games ................................... 25
Organiser...................................26
Calendar ................................26
Appointments .........................26
Voice mail/CB services ...............28
SMS............................................29
MMS ..........................................31
Message lists and profiles .........33
Profiles.......................................34
Extras.........................................35
SAT menu ..............................35
Alarm clock .............................35
Calculator ...............................35
Recorder .................................36
Stopwatch...............................37
Countdown ...........................37
Camera (Accessories) ..............37
Fast access.................................39
Filesystem .................................40
Setup .........................................41
Data Exchange Software ...........47
Questions & Answers ................48
Customer Care ...........................51
Care and maintenance ..............53
Product data ..............................54
Battery quality statement .........55
Guarantee certificate (UK) ........56
Guarantee certificate (IRL) ........57
Menu tree ..................................58
SAR (European Union) ...............63
SAR – International (ICNIRP) .....65
Index..........................................66
Contents
This is a short
version of
User Guide.
You can
download the
detailed ver-
sion from the
Internet at:
www.my-sie-
mens.com/
c62
Safety precautions
2
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:09)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_SafetyPrecautions.fm
Safety
precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with legal
requirements and local restric-
tions when using the phone. For
example in aeroplanes, petrol
stations, hospitals or while
driving.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more infor-
mation consult your doctor.
The ringtone (p. 42), info tones
and handsfree talking are repro-
duced through the loudspeaker.
Do not hold the phone to your ear
when it rings or when you have
switched on the handsfree func-
tion (p. 15). Otherwise you risk
serious permanent damage to
your hearing.
The SIM card may be removed.
Caution! Small parts like this
could be swallowed by young
children.
The mains voltage specified on
the power supply unit (Volt)
must not be exceeded. Other-
wise the charging device may
be destroyed.
Only use original Siemens bat-
teries (100 % mercury-free) and
– charging devices. Otherwise
you risk serious damage to
health and property. The battery
could explode, for instance.
You may only open the phone to
replace the battery (100 % mer-
cury-free) or SIM card. You
must not open the battery under
any circum-stances. All other
changes to this device are strict-
ly prohibited and will invalidate
the operating licence.
Safety precautions
3
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:09)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_SafetyPrecautions.fm
Please note:
Please dispose of unwanted
batteries and phones as permit-
ted by the laws in your country.
The phone may cause interfer-
ence in the vicinity of TV sets,
radios and PCs.
Use only Siemens original ac-
cessories. This will avoid poten-
tial risks to health or property
and ensure compliance with all
relevant regulations.
If you wear the phone around your neck,
please use only the Siemens original FCT-
500 Loop Case. In order to avoid any inju-
ries or death from strangulation no other
accessories are allowed for this purpose.
Childs up to 14 years shall not wear the
phone around the neck.
Improper use will invalidate the guarantee!
Phone overview
4
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 10:08)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Overview.fm
Phone
overview
1 Integrated antenna
Do not interfere the phone un-
neccessarily above the battery
cover, this reduces the signal
strength.
2 Loudspeaker
3 Display symbols
Signal strength/GPRS available/
battery level.
4 Control key
See next page
5 Input keys
Numbers, letters
6 Microphone
7 Plug socket
Connection for charger, head-
set etc.
Note
Your phone's display is delivered with a
protective film.
Remove this film before getting started.
In rare cases the static discharge may
cause discolouration at the edges of the
display. However this will disappear within
10 minutes.
_ª g
Service provider
05.11.2003 12:30
New MMS Menu
1
2
3
4
6
5
7
Phone overview
5
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 10:08)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Overview.fm
1 Soft keys
The current functions of these
keys are shown in the bottom
line of the display as
§text§
/icons.
2
A
Call key
Dial phone number/name dis-
played, take calls.
In standby mode: Show last
dialled phone numbers.
_ª g
Service provider
05.11.2003 12:30
New MMS
Menu
1
2
4
5
3
6
3
B
On/Off/End key
• Switched off: hold down to switch
on.
• During a call or in an application:
press briefly to finish.
In menus:press briefly: one level
back. Press and hold: return to
standby mode.
• In standby mode: hold down, to
switch off phone.
4 Control key
In lists and menus:
G Scroll up/down.
D
Select function.
C
Menu level back.
During a call:
D
Open call menu.
E
Display volume setting.
In standby mode:
F
Open Addressbook.
D Open menu.
C
GPRS info.
5
*
Hold down
• In standby mode: switch on/off all
signal tones (except alarm).
For incoming calls: switch off ring-
tones only.
6
Hold down
• In standby mode: switch key lock
on/off.
Display symbols (selection)
6
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 11:49)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_DisplaySymbols.fm
Display
symbols
(selection)
Display symbols
t
Signal strength.
h
Charging.
d
Battery charging status,
e.g. 50%.
è
Addressbook.
Z
Records.
É
Surf & Fun
Organiser.
]
Messages.
~
Profiles.
y
Extras.
Ñ
File system.
m
Setup.
n
All calls are diverted.
j
Ringer off.
k
Short ring (beep) only.
l
Ringer only if caller is stored in
the Addressbook.
i
Alarm set.
y
Alarm clock activated.
µ
Key lock activated.
Phone numbers/names:
,
On the SIM card
On the SIM card
(PIN 2 protected).
v
In the phone memory.
²
No network access.
p, o
Function activated/deactivated.
ABC/
Abc/abc
Indicates whether upper- or
lowercase letters are active.
Text input with T9.
«
Activated and available.
ª
Registered.
©
GPRS Download.
Headset mode.
±
Auto answer feature on.
Organiser/Extras symbols
u
Memo.
v
Call.
w
Meeting.
y
Alarm clock.
ç
Stopwatch.
Display symbols (selection)
7
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 11:49)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_DisplaySymbols.fm
Soft keys
]
Message received.
MMS received.
Û
MMS notifiation received.
\
Voice mail received.
Unanswered call.
?
Save in Addressbook.
@
Copy from Addressbook.
Depending on your service provider, some
of the symbols displayed here may differ
from those on the phone.
Getting started
8
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Startup.fm
Getting
started
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your account is
stored. If the SIM card is in credit-
card size, snap out the smaller seg-
ment and remove any rough edges.
Remove the battery cover by
pressing top centre of the cover
and slide downwards.
Insert the SIM card into the slot
with the contact area facing down-
wards and push gently until it en-
gages below the holder (make
sure the angled corner is in the
correct position).
Place the battery into the block of
the phone, with the contact area
facing down. Push the battery
carefully downwards.
Slide the battery cover upwards
from the bottom of the phone, un-
til it latches into place.
Note
Always switch off phone before removing
the battery!
Only 3 V SIM cards are supported. Please
contact your service provider, if you have
an older card.
Getting started
9
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Startup.fm
Charging the battery
The battery is not supplied fully
charged. Plug the charger cable into
the bottom of the phone, plug the
power supply unit into the mains
power socket and charge for at least
3,5 hours.
Display when charging is in progress
h During charging.
Charging time
An empty battery is fully charged af-
ter about 3,5 hours. Charging is only
possible within the temperature
range of +0 °C to +45 °C. If the tem-
perature rises/falls above/below this,
the charge symbol flashes a war-
ning. The voltage specified on the
power supply unit must not be ex-
ceeded.
To obtain maximum performance of
the battery it must be fully charged
and then emptied at least five times.
Charge icon not visible
If the battery was completely dis-
charged, the charging symbol will
not be immediately visible when
connected to the charger. In this
case the battery is fully charged after
4,5–5,5 hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (empty–full):
adg
A beep sounds when the battery is
nearly empty. The charge level of the
battery is displayed correctly only af-
ter uninterrupted charging/discharg-
ing. You should therefore not remove
the battery unnecessarily and where
possible not interrupt charging prema-
turely.
Performance
A full battery will give you between
60–250 hours of standby time or
1,5–4,5 hours of talktime.
Note
The charger will become hot after extended
use. This is normal and not dangerous.
Switching on/off, PIN
10
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Startup.fm
Switching on/
off, PIN
Turning the phone on/off
B
Hold down On/Off/End key
to switch on or off.
Enter PIN
The SIM card can be protected with a
4–8 digit PIN.
J
Enter the PIN using the
number keys. The charac-
ters **** appear to en-
sure nobody can read
your PIN on the display.
Correct errors with §Clear§.
§OK§ Confirm your input with
the right soft key. Logging
on to the network will
take a few seconds.
Switching on your phone
for the first time
Time and date
The clock must be set to the right
time once at start-up.
§Change§ Press.
J
Enter the time, validate
with §OK§.
§Change§ Enter the date, validate
with §OK§.
Now you are also asked if you want
to copy the SIM card phonebook ent-
ries to the Addressbook on the
phone. If you choose §Yes§ please do
not interrupt this procedure. During
this time do not accept incoming calls.
Follow instructions on the display.
You are able to copy data from the
SIM card later on (page 22).
Signal strength
t
Strong receive signal.
U A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
Please enter
your PIN:
* * * *
OK
Clear
Note
Change PIN.................................page 13
Other network..............................page 45
Clear SIM card barring ................ page 13
Switching on/off, PIN
11
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Startup.fm
Emergency number (SOS)
Only to be used in real emergencies!
By pressing the soft key, §SOS§ you
can make an emergency call on any
network without a SIM card and with-
out entering a PIN (not available in
all countries).
Standby mode
When the name of the service pro-
vider appears on the display, the
phone is in standby mode and ready for
use.
The left soft key may have different
functions pre-assigned.
B
Hold down the On/Off/End
key to return to standby
mode from any menu
ption.
Menu
_ g
Service provider
05.11.2003 12:30
My menu
General information
12
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Startup.fm
General
information
User guide
The following symbols are used to
explain an operation:
Menu controls
In this user guide the steps needed
to reach a function are shown in con-
cise form, e.g. to display call list for
missed calls:
§Menu§
¢
Z
¢Calls missed
This corresponds to:
§Menu§ Open menu.
(From standby mode: press the
right soft key).
E
Select Z Records.
(In menu; press top of the cont-
rol key).
§Select§ Press the right soft key to
open the Records sub-
menu.
§Select§ Press the right soft key to
open the Calls missed list.
F
Scroll to the required
entry.
§View§ Press the left soft key to
display phone number
with date/time.
J
Enter numbers or
letters.
B
On/Off/End key.
A
Call key.
D
Press the control key on
the side indicated.
<>
Soft keys
§Menu§
Displays a soft key func-
tion.
L
Function dependent on
ser-vice provider, may
require special registra-
tion.
Select
My menu
èZ
É
]~
m
Messages
Security
13
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Startup.fm
Security
Codes
The phone and the SIM card are pro-
tected against misuse by several se-
curity codes.
§Menu§
¢m ¢Security¢Codes
¢Select function.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not per-
mit deactivating the control.
§Select§ Press.
J Enter PIN.
§OK§ Confirm input.
§Change§ Press.
§OK§ Confirm.
Change PIN
You can change the PIN to any 4–8
digit number you find easier to re-
member.
J Enter current PIN.
§OK§ Press.
J
,
§OK§ Enter new PIN.
J
,
§OK§ Repeat new PIN.
Change PIN2
(display only if PIN 2 is available).
Proceed as with Change PIN.
Chg.phonecode
The preset phonecode is 0000 for all
phonecode protected functions. You
are able to change it:
J
Enter current phonecode.
§OK§ Press.
J
,
§OK§ Enter new phonecode
(4–8 digits).
J
,
§OK§ Repeat new phonecode.
Clear SIM-card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Prevent accidental
activation
Even if PIN entry is deactivated, con-
firmation is required to switch on the
phone. This prevents the phone from
being switched on accidentally, e.g.
when you are carrying it in a bag.
B
Hold down.
§OK§ Press. The phone switches
on.
Keep these confidential numbers in a
safe place where you can access them
again if required.
Making a phone call
14
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Calling.fm
Making a
phone call
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Dial number (always with
area code, if necessary
with international dialling
code).
§Clear§ A short press clears
the last digit, a long press
clears the entire number.
A
Press the Call key to dial
the number.
End call
B
Press the End key briefly.
The call is ended. Press this key, even
if the other person hung up first.
Set volume
E
Press briefly during a call.
G
Set volume level and con-
firm with §OK§.
If the Car Kit is used, its volume set-
ting will not affect the usual setting
on the phone.
Redial previous numbers
For redialling previously dialled
numbers:
A
Press the Call key once.
G
Pick out the required
phone number from the
list, then press ...
A
... to dial.
If number is busy
Automatic redial of last number
§Auto dial§ The phone number is au-
tomatically dialled for up
to 15 minutes at increas-
ing time intervals.
Reminder
§Prompt§ A beep reminds you to re-
dial the displayed phone
number after 15 minutes.
International dialling code
In standby mode, to insert international
dialling codes from the list:
0
Hold down until a "+" is dis-
played. This replaces the first
two digits of the international
dialling code.
§+List§ Press, select country.
Making a phone call
15
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Calling.fm
Accept call
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
§Answer§ or
A
If the phone number has been trans-
mitted by the network, it is dis-
played. If the caller's name is in the
Addressbook, this will be shown in-
stead of the number. If set, a picture
can be displayed instead of the bell
icon.
Reject call
§Reject§ or press B briefly.
Handsfree
You can put the phone aside during
a call. You can then hear the caller
via the loudspeaker.
§Handsfr.§ Activate handsfree
function.
§Yes§ Switch on.
E
Use the control key to ad-
just the volume.
§Handsfr.§ Deactivate.
Note
Save phone no............................ page 21
Accept call using any key............ page 42
Note
Please make sure you have accepted the
call before holding the phone to your ear.
This will prevent a loud ring tone from
damaging your hearing!
Note
Always deactivate "handsfree talking"
before holding the phone to your ear. This
will avoid damage to your hearing.
m menu
Handsfr.
_ g
Making a phone call
16
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:10)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Calling.fm
Hold call
You can call another number
during a call.
y menu§ Open the call menu
Hold Put current call on hold
Dial the new phone number/
Addressbook F. When the new con-
nection is established:
§Swap§ Swap back and forth bet-
ween both calls.
You may be advised during a call
that there is another call waiting
by a special "call waiting" tone
(page 43).
§Swap§ Accept the waiting call
and put the current call on
hold. To swap between
the two calls proceed as
above.
or
B
End the current call.
§Answer§ Accept the new call.
Conference
Call up to 5 parties and link them to-
gether in a conference call. When
the new connection is established:
y menu§ Open menu and select
Hold. The current call is
put on hold.
J
Now dial a new number.
When the new connec-
tion is established ...
y menu§ ... open menu and select
Conference. The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).
End
B
All calls in the conference
are ended simultaneously
when the End key is
pressed.
L L
Text entry
17
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:23)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Text.fm
Text entry
Enter text without T9
Press number key repeatedly until
the required letter appears. The cur-
sor advances after a short delay.
Example:
2
Pressing briefly once types
the letter a, twice the let-
ter b, etc. The first letter in
each name is automatical-
ly written in UPPER CASE.
Hold down to write the
number.
Ä, ä/1–9 Umlauts and numbers are
displayed after the rele-
vant letters.
§Clear§ Press briefly to delete the
letter before the cursor,
hold down to erase the
whole word.
H
Move the cursor
(forwards/back).
Press briefly: Switch bet-
ween abc, Abc,
T9
abc,
T9
Abc, 123. Status indica-
tor in the top line of the
display is shown.
Hold down: All input modes
are displayed.
*
Press briefly: Special char-
acters are shown.
Hold down: All input lan-
guages are displayed.
0
Press once/repeatedly:
. ,? ! ’ " 0 + - ( ) @ / : _
Hold down: Writes 0.
1
Writes blank. Press twice
= jumps a line.
Special characters
*
Press briefly. The character
map is displayed:
1
) Line skip
G, H Navigate to character.
§Select§ Press.
1)
¿¡_; . ,?!+-
"’:
* /()
¤¥
€@\ &# [ ] { }%~
<=>|^§Γ Θ Λ Ξ
π Σ Φ Ψ
Text entry
18
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:23)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Text.fm
Text entry with T9.
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive
dictionary.
Activate, deactivate T9
§Options§ Open text menu, select T9
input, then T9 preferred.
§Change§ Activate T9.
Select Input language
Select the language in which you
want to compose your message.
§Options§ Open text menu, select T9
input then: Input language.
§Select§ Confirm; the new lan-
guage is set.
Type a word using T9
The display changes as you proceed.
Therefore, it is best if you finish a
word without looking at the display.
Simply press the keys once only
where the relevant letter is located.
For "hotel", for example:
press briefly for
T9
Abc,
then
46835
1
press. A blank ends a
word.
Do not use special characters such as
Ä but write the standard characters,
e.g. A; T9 will do the rest for you.
T9 word suggestions
If several options are found in the
dictionary for a key sequence
(a word), the most probable is dis-
played first.
The word must be highlighted as
§inverted§. Then press
»
buttons. The displayed
word is replaced with a
different word. If this is
also incorrect, repeat until
the correct word is
displayed.
Note
0
Setting a full stop. The word is
ended when followed by a
blank space. Within a word, a
full stop represents an apos-
trophe or hyphen:
e.g. §provider.s§ = provider’s.
D
Move to the right. Ends a
word.
Press briefly: Switch be-
tween: abc, Abc,
T9
abc,
T9
Abc, 123. Status indicator
in the top line of the display.
Hold down: All input modes
are displayed.
*
Press briefly: Select special
characters (page 17).
Hold down: All input langua-
ges are displayed.
Text entry
19
C62 en SUG, A31008-H6880-A1-1-7619 (17. September 2003, 15:23)
© Siemens AG 2002, L:\C62_Squirrel_(mc)\en\sug\von_itl\C62_Text.fm
To add a word to the dictionary:
§Spell§ Select.
Now write the word without T9 sup-
port and accept with §Save§ into the
dictionary.
Correct a word
Words written with T9:
H
Move left or right,
word by word, until
the required word is
§inverted§.
»
Scroll through the T9
word suggestions again.
§Clear§ Deletes the character to
the left of the cursor and
displays a new possible
word.
Words not written with T9:
H
Move letter by letter to
the left/right.
§Clear§ Deletes the letter to the
left of the cursor.
J
Letters are inserted at the
cursor position.
Predef. text
The phone contains predefined texts
that you can add to your messages
(SMS, MMS). You can also create and
store your personal texts.
Unlike personal stored texts, prede-
fined texts cannot be changed or de-
leted.
Write personal stored text
§Menu§¢] ¢Text module
§Options§ Select New text.
J
Write text.
§Options§ Select Save.
Accept the default name
or give it a new name,
then save with §OK§.
Use predefined texts
J
Write message
(SMS, MMS).
§Options§ Press.
G
Select Text modules.
G
Select predefined text
from the list.
§Select§ Confirm. The text is dis-
played.
§Select§ Confirm. The text is in-
serted into the message
to the right of the cursor.
T9
®
Text Input is licensed under one or more of
the following:
U.S. Pat. Nos. 5,818,437, 5,953,541,
5, 187, 480, 5, 945, 928, and 6, 011, 554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69

Siemens Cell Phone C62 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages