10
•Closethewatertanklidandplacetheglassjugwith
closed lid in the appliance.
•Setthenumberofcups to the amount of water
in the water tank . The number of cups is shown
in the display .
Note: Ensure that the selected number of cups
corresponds to the amount of water in the water
container . Please note that when making coee
all the water in the water tank is used. If the
number of cups and the amount of water do not
correspond to each other then this can lead to you
not getting the coee flavour you would like.
5.1 Using coffee beans
•Whenthebeancontaineriscompletelyfull,youcan
brew enough coee for 10 cups 2 or 3 times. Roast-
ed coee beans lose their flavour. Only fill coee
beans in the container which will be used within a
few days.
•Openthebeancontainerlidandllwithcoee
beans . Then close the lid.
Note: To ensure the grinder functions perfectly
do not use caramelised coee beans. Do not put
ground coee in the bean container.
•Opentheswivellter to the left.
•FoldaMelitta
®
1x4
®
coee filter at the embossed
seams and place it in the filter holder . Use your
hand to press the filter in to ensure the best fit.
•Swivelthelterbackintotheappliance.Anaudible
click indicates that the filter is in place.
•Turnthegrinddial, to select the required grind
level (from fine to coarse). The grind dial allows you
to select from 3 dierent settings. Settings between
the symbols are also possible. The ‘fine’ setting is
for standard coee. This setting may give the coee
a slightly bitter character. If a coarser setting is
selected the coee will be less bitter.
•Pressthebuttontoselectcoeestrength. The
selected coee strength is shown in the display .
One coee bean is for mild, two beans for
medium and three beans for strong.
•TurntheapplianceonusingthestartbuttonON/
OFF . Coee preparation begins and the green
LED flashes.
Note: The appliance has an overload safety function
of the grinder, which protects the grinder against
damage by foreign objects in the coee beans. If you
hear a loud chattering, unknown noise during the
grinding process, switch the appliacne o and
clean the grinder as described in point 7.
•WhenthecoeeisreadythegreenLED is illu-
minated but stops flashing. The hot plate keeps your
coee warm and switches o automatically after
the time you have set (see point 4). This avoids the
unnecessary use of electricity and saves energy. You
can of course turn the appliance o manually at any
time .
•Thedripstop prevents coee dripping when you
remove the jug from the appliance.
•Theusedcoeeltercanbedisposedofsimplyand
easily using the removable filter insert.
5.2 Using ground coffee
•Tousegroundcoeeselectthegroundcoee
setting .
•Opentheswivelltertotheleft.
•FoldaMelitta
®
1x4
®
coee filter at the embossed
seams and place it in the filter holder . Use your
hand to press the filter in to ensure the best fit.
•Putthegroundcoeeinthecoeelter.Theamount
of coee you use depends on your personal taste. We
recommend using 6g to 8g of ground coee per cup.
•Swivelthelterbackintotheappliance.Anaudible
click indicates that the filter is in place.
•TurntheapplianceonusingthestartbuttonON/
OFF . Coee preparation begins and the green
LED flashes.
•WhenthecoeeisreadythegreenLED is illu-
minated but stops flashing. The hot plate keeps your
coee warm and switches o automatically after
the time you have set (see point 4). This avoids the
unnecessary use of electricity and saves energy. You
can of course turn the appliance o manually at any
time .
•Thedripstop prevents coee dripping when you
remove the jug from the appliance.
•Theusedcoeeltercanbedisposedofsimplyand
easily using the removable filter insert.
6. Timer Feature
The appliance is equipped with a TIMER. This allows
you to start brewing coffee automatically at the time
you set.
•Preparetheapplianceasdescribedinpoint5.‘coee
preparation’ but without pressing the start button
ON/OFF .
•Tosettherequiredstarttime,holddownthe
TIMER button . The first time you set it, the
time indicator and the clock symbol will flash in the
display . Set the required start time by repeatedly
pressing the H and M buttons . It is possible to
speed this up by holding in the respective button.
•TwosecondsafteryouletgooftheTIMERbutton
the current time will be displayed again. The start
time you selected is saved until a new time is se-
lected or the appliance is removed from the power
supply.
•PressingtheTIMERbutton briefly activates the
timer feature for automatic coee preparation. The
start time you set appears briefly in the display .
The clock symbol in the display and the white
LED are illuminated .
•Theappliancestartspreparingcoeeautomatically
at the time you set.
•Ifyoudonotremovetheappliancefromthemains
electricity or programme a new start time then the
time previously set is saved.
•TheTIMERfeaturecanbedeactivatedatany
time by pressing the TIMER button . The white
LED and the clock symbol are no longer
illuminated.
GB