Miller MD010951V Owner's manual

Category
Welding System
Type
Owner's manual

This manual is also suitable for

OM-1546 090 004P
2012−12
Processes
Description
MIG (GMAW) Welding
Flux Cored (FCAW) Welding
Wire Feeder
S-32S And S-32SL
Visit our website at
www.MillerWelds.com
File: MIG (GMAW)
Miller Electric manufactures a full line
of welders and welding related equipment.
For information on other quality Miller
products, contact your local Miller distributor to receive the latest full
line catalog or individual specification sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller, or visit us at
www.MillerWelds.com on the web.
Thank you and congratulations on choosing Miller. Now you can get
the job done and get it done right. We know you don’t have time to do
it any other way.
That’s why when Niels Miller first started building arc welders in 1929,
he made sure his products offered long-lasting value and superior
quality. Like you, his customers couldn’t afford anything less. Miller
products had to be more than the best they could be. They had to be the
best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owners Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety precautions. They
will help you protect yourself against potential hazards on the worksite.
We’ve made installation and operation quick
and easy. With Miller you can count on years
of reliable service with proper maintenance.
And if for some reason the unit needs repair,
there’s a Troubleshooting section that will
help you figure out what the problem is. The
parts list will then help you to decide the
exact part you may need to fix the problem.
Warranty and service information for your
particular model are also provided.
Miller is the first welding
equipment manufacturer in
the U.S.A. to be registered to
the ISO 9001 Quality System
Standard.
Working as hard as you do
− every power source from
Miller is backed by the most
hassle-free warranty in the
business.
From Miller to You
Mil_Thank 2009−09
TABLE OF CONTENTS
SECTION 8 − SAFETY PRECAUTIONS - READ BEFORE USING 1...................................
8-1. Symbol Usage 1........................................................................
8-2. Arc Welding Hazards 1..................................................................
8-3. Additional Symbols For Installation, Operation, And Maintenance 3.............................
8-4. California Proposition 65 Warnings 4.......................................................
8-5. Principal Safety Standards 4.............................................................
8-6. EMF Information 4......................................................................
SECTION 9 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION 5............................
9-1. Symboles utilisés 5.....................................................................
9-2. Dangers relatifs au soudage à l’arc 5......................................................
9-3. Dangers supplémentaires en relation avec l’installation, le fonctionnement et la maintenance 7......
9-4. Proposition californienne 65 Avertissements 8...............................................
9-5. Principales normes de sécurité 9..........................................................
9-6. Informations relatives aux CEM 9.........................................................
SECTION 3 − DEFINITIONS 11...................................................................
3-1. Manufacturers Warning Label Definitions 11.................................................
3-2. Miscellaneous Symbols And Definitions 11...................................................
SECTION 4 − INSTALLATION 12..................................................................
4-1. Specifications 12........................................................................
4-2. Installing And Aligning Wire Guide And Drive Roll 13..........................................
4-3. Typical Connections 14...................................................................
4-4. Connecting Welding Gun, Volt Sense Lead, And Weld Cable 14.................................
4-5. Connecting Shielding Gas (Optional) 15.....................................................
4-6. Installing Welding Wire And Adjusting Hub Tension 15.........................................
4-7. Threading Welding Wire 16................................................................
SECTION 5 − OPERATION 17....................................................................
5-1. Controls 17.............................................................................
5-2. Wire Speed Control Settings 18............................................................
SECTION 6 − MAINTENANCE & TROUBLESHOOTING 19...........................................
6-1. Routine Maintenance 19..................................................................
6-2. Troubleshooting 19......................................................................
SECTION 7 − ELECTRICAL DIAGRAM 20..........................................................
SECTION 8 − PARTS LIST 22.....................................................................
WARRANTY
OM-1546 Page 1
SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING
som 2011−10
7
Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.
1-1. Symbol Usage
DANGER! − Indicates a hazardous situation which, if
not avoided, will result in death or serious injury. The
possible hazards are shown in the adjoining symbols
or explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible
hazards are shown in the adjoining symbols or ex-
plained in the text.
NOTICE − Indicates statements not related to personal injury.
. Indicates special instructions.
This group of symbols means Warning! Watch Out! ELECTRIC
SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult sym-
bols and related instructions below for necessary actions to avoid the
hazards.
1-2. Arc Welding Hazards
The symbols shown below are used throughout this manual
to call attention to and identify possible hazards. When you
see the symbol, watch out, and follow the related instructions
to avoid the hazard. The safety information given below is
only a summary of the more complete safety information
found in the Safety Standards listed in Section 1-5. Read and
follow all Safety Standards.
Only qualified persons should install, operate, maintain, and
repair this unit.
During operation, keep everybody, especially children, away.
ELECTRIC SHOCK can kill.
Touching live electrical parts can cause fatal shock
s
or severe burns. The electrode and work circuit i
s
electrically live whenever the output is on. The inpu
t
power circuit and machine internal circuits are also
live when power is on. In semiautomatic or automati
c
wire welding, the wire, wire reel, drive roll housing
,
and all metal parts touching the welding wire are
electrically live. Incorrectly installed or improperl
y
grounded equipment is a hazard.
D Do not touch live electrical parts.
D Wear dry, hole-free insulating gloves and body protection.
D Insulate yourself from work and ground using dry insulating mats
or covers big enough to prevent any physical contact with the work
or ground.
D Do not use AC output in damp areas, if movement is confined, or if
there is a danger of falling.
D Use AC output ONLY if required for the welding process.
D If AC output is required, use remote output control if present on
unit.
D Additional safety precautions are required when any of the follow-
ing electrically hazardous conditions are present: in damp
locations or while wearing wet clothing; on metal structures such
as floors, gratings, or scaffolds; when in cramped positions such
as sitting, kneeling, or lying; or when there is a high risk of unavoid-
able or accidental contact with the workpiece or ground. For these
conditions, use the following equipment in order presented: 1) a
semiautomatic DC constant voltage (wire) welder, 2) a DC manual
(stick) welder, or 3) an AC welder with reduced open-circuit volt-
age. In most situations, use of a DC, constant voltage wire welder
is recommended. And, do not work alone!
D Disconnect input power or stop engine before installing or
servicing this equipment. Lockout/tagout input power according to
OSHA 29 CFR 1910.147 (see Safety Standards).
D Properly install, ground, and operate this equipment according to
its Owners Manual and national, state, and local codes.
D Always verify the supply ground − check and be sure that input
power cord ground wire is properly connected to ground terminal in
disconnect box or that cord plug is connected to a properly
grounded receptacle outlet.
D When making input connections, attach proper grounding conduc-
tor first − double-check connections.
D Keep cords dry, free of oil and grease, and protected from hot metal
and sparks.
D Frequently inspect input power cord for damage or bare wiring −
replace cord immediately if damaged − bare wiring can kill.
D Turn off all equipment when not in use.
D Do not use worn, damaged, undersized, or poorly spliced cables.
D Do not drape cables over your body.
D If earth grounding of the workpiece is required, ground it directly
with a separate cable.
D Do not touch electrode if you are in contact with the work, ground,
or another electrode from a different machine.
D Do not touch electrode holders connected to two welding ma-
chines at the same time since double open-circuit voltage will be
present.
D Use only well-maintained equipment. Repair or replace damaged
parts at once. Maintain unit according to manual.
D Wear a safety harness if working above floor level.
D Keep all panels and covers securely in place.
D Clamp work cable with good metal-to-metal contact to workpiece
or worktable as near the weld as practical.
D Insulate work clamp when not connected to workpiece to prevent
contact with any metal object.
D Do not connect more than one electrode or work cable to any
single weld output terminal. Disconnect cable for process not in
use.
SIGNIFICANT DC VOLTAGE exists in inverter weld-
ing power sources AFTER removal of input power.
D Turn Off inverter, disconnect input power, and discharge input
capacitors according to instructions in Maintenance Section
before touching any parts.
HOT PARTS can burn.
D Do not touch hot parts bare handed.
D Allow cooling period before working on equip-
ment.
D To handle hot parts, use proper tools and/or
wear heavy, insulated welding gloves and
clothing to prevent burns.
OM-1546 Page 2
Welding produces fumes and gases. Breathing
these fumes and gases can be hazardous to your
health.
FUMES AND GASES can be hazardous.
D Keep your head out of the fumes. Do not breathe the fumes.
D If inside, ventilate the area and/or use local forced ventilation at the
arc to remove welding fumes and gases.
D If ventilation is poor, wear an approved air-supplied respirator.
D Read and understand the Material Safety Data Sheets (MSDSs)
and the manufacturer’s instructions for metals, consumables,
coatings, cleaners, and degreasers.
D Work in a confined space only if it is well ventilated, or while
wearing an air-supplied respirator. Always have a trained watch-
person nearby. Welding fumes and gases can displace air and
lower the oxygen level causing injury or death. Be sure the breath-
ing air is safe.
D Do not weld in locations near degreasing, cleaning, or spraying op-
erations. The heat and rays of the arc can react with vapors to form
highly toxic and irritating gases.
D Do not weld on coated metals, such as galvanized, lead, or
cadmium plated steel, unless the coating is removed from the weld
area, the area is well ventilated, and while wearing an air-supplied
respirator. The coatings and any metals containing these elements
can give off toxic fumes if welded.
Arc rays from the welding process produce intense
visible and invisible (ultraviolet and infrared) rays
that can burn eyes and skin. Sparks fly off from the
weld.
D Wear an approved welding helmet fitted with a proper shade of
filter lenses to protect your face and eyes from arc rays and
sparks when welding or watching (see ANSI Z49.1 and Z87.1
listed in Safety Standards).
D Wear approved safety glasses with side shields under your
helmet.
D Use protective screens or barriers to protect others from flash,
glare and sparks; warn others not to watch the arc.
D Wear protective clothing made from durable, flame-resistant
material (leather, heavy cotton, or wool) and foot protection.
ARC RAYS can burn eyes and skin.
Welding on closed containers, such as tanks,
drums, or pipes, can cause them to blow up. Sparks
can fly off from the welding arc. The flying sparks, hot
workpiece, and hot equipment can cause fires and
burns. Accidental contact of electrode to metal objects can cause
sparks, explosion, overheating, or fire. Check and be sure the area is
safe before doing any welding.
WELDING can cause fire or explosion.
D Remove all flammables within 35 ft (10.7 m) of the welding arc. If
this is not possible, tightly cover them with approved covers.
D Do not weld where flying sparks can strike flammable material.
D Protect yourself and others from flying sparks and hot metal.
D Be alert that welding sparks and hot materials from welding can
easily go through small cracks and openings to adjacent areas.
D Watch for fire, and keep a fire extinguisher nearby.
D Be aware that welding on a ceiling, floor, bulkhead, or partition can
cause fire on the hidden side.
D Do not weld on containers that have held combustibles, or on
closed containers such as tanks, drums, or pipes unless they are
properly prepared according to AWS F4.1 and AWS A6.0 (see
Safety Standards).
D Do not weld where the atmosphere may contain flammable dust,
gas, or liquid vapors (such as gasoline).
D Connect work cable to the work as close to the welding area as
practical to prevent welding current from traveling long, possibly
unknown paths and causing electric shock, sparks, and fire
hazards.
D Do not use welder to thaw frozen pipes.
D Remove stick electrode from holder or cut off welding wire at
contact tip when not in use.
D Wear oil-free protective garments such as leather gloves, heavy
shirt, cuffless trousers, high shoes, and a cap.
D Remove any combustibles, such as a butane lighter or matches,
from your person before doing any welding.
D After completion of work, inspect area to ensure it is free of sparks,
glowing embers, and flames.
D Use only correct fuses or circuit breakers. Do not oversize or by-
pass them.
D Follow requirements in OSHA 1910.252 (a) (2) (iv) and NFPA 51B
for hot work and have a fire watcher and extinguisher nearby.
FLYING METAL or DIRT can injure eyes.
D Welding, chipping, wire brushing, and grinding
cause sparks and flying metal. As welds cool,
they can throw off slag.
D Wear approved safety glasses with side
shields even under your welding helmet.
BUILDUP OF GAS can injure or kill.
D Shut off compressed gas supply when not in use.
D Always ventilate confined spaces or use
approved air-supplied respirator.
ELECTRIC AND MAGNETIC FIELDS (EM
F)
can affect Implanted Medical Devices.
D Wearers of Pacemakers and other Implante
d
Medical Devices should keep away.
D Implanted Medical Device wearers should consult their docto
r
and the device manufacturer before going near arc welding, spo
t
welding, gouging, plasma arc cutting, or induction heating
operations.
NOISE can damage hearing.
Noise from some processes or equipment can
damage hearing.
D Wear approved ear protection if noise level is
high.
Compressed gas cylinders contain gas under high
pressure. If damaged, a cylinder can explode. Since
gas cylinders are normally part of the welding
process, be sure to treat them carefully.
CYLINDERS can explode if damaged.
D Protect compressed gas cylinders from excessive heat, mechani-
cal shocks, physical damage, slag, open flames, sparks, and arcs.
D Install cylinders in an upright position by securing to a stationary
support or cylinder rack to prevent falling or tipping.
D Keep cylinders away from any welding or other electrical circuits.
D Never drape a welding torch over a gas cylinder.
D Never allow a welding electrode to touch any cylinder.
D Never weld on a pressurized cylinder − explosion will result.
D Use only correct compressed gas cylinders, regulators, hoses,
and fittings designed for the specific application; maintain them
and associated parts in good condition.
D Turn face away from valve outlet when opening cylinder valve.
D Keep protective cap in place over valve except when cylinder is in
use or connected for use.
D Use the right equipment, correct procedures, and sufficient num-
ber of persons to lift and move cylinders.
D Read and follow instructions on compressed gas cylinders,
associated equipment, and Compressed Gas Association (CGA)
publication P-1 listed in Safety Standards.
OM-1546 Page 3
1-3. Additional Symbols For Installation, Operation, And Maintenance
FIRE OR EXPLOSION hazard.
D Do not install or place unit on, over, or near
combustible surfaces.
D Do not install unit near flammables.
D Do not overload building wiring − be sure power supply system is
properly sized, rated, and protected to handle this unit.
FALLING EQUIPMENT can injure.
D Use lifting eye to lift unit only, NOT running
gear, gas cylinders, or any other accessories.
D Use equipment of adequate capacity to lift and
support unit.
D If using lift forks to move unit, be sure forks are long enough to
extend beyond opposite side of unit.
D Keep equipment (cables and cords) away from moving vehicles
when working from an aerial location.
D Follow the guidelines in the Applications Manual for the Revised
NIOSH Lifting Equation (Publication No. 94−110) when manu-
ally lifting heavy parts or equipment.
OVERUSE can cause OVERHEATING
D Allow cooling period; follow rated duty cycle.
D Reduce current or reduce duty cycle before
starting to weld again.
D Do not block or filter airflow to unit.
FLYING SPARKS can injure.
D Wear a face shield to protect eyes and face.
D Shape tungsten electrode only on grinder with
proper guards in a safe location wearing proper
face, hand, and body protection.
D Sparks can cause fires — keep flammables away.
STATIC (ESD) can damage PC boards.
D Put on grounded wrist strap BEFORE handling
boards or parts.
D Use proper static-proof bags and boxes to
store, move, or ship PC boards.
MOVING PARTS can injure.
D Keep away from moving parts.
D Keep away from pinch points such as drive
rolls.
WELDING WIRE can injure.
D Do not press gun trigger until instructed to do
so.
D Do not point gun toward any part of the body,
other people, or any metal when threading
welding wire.
BATTERY EXPLOSION can injure.
D Do not use welder to charge batteries or jum
p
start vehicles unless it has a battery chargin
g
feature designed for this purpose.
MOVING PARTS can injure.
D Keep away from moving parts such as fans.
D Keep all doors, panels, covers, and guards
closed and securely in place.
D Have only qualified persons remove doors, panels, covers, or
guards for maintenance and troubleshooting as necessary.
D Reinstall doors, panels, covers, or guards when maintenance is
finished and before reconnecting input power.
READ INSTRUCTIONS.
D Read and follow all labels and the Owners
Manual carefully before installing, operating, or
servicing unit. Read the safety information at
the beginning of the manual and in each
section.
D Use only genuine replacement parts from the manufacturer.
D Perform maintenance and service according to the Owners
Manuals, industry standards, and national, state, and local
codes.
H.F. RADIATION can cause interference.
D High-frequency (H.F.) can interfere with radio
navigation, safety services, computers, and
communications equipment.
D Have only qualified persons familiar with
electronic equipment perform this installation.
D The user is responsible for having a qualified electrician prompt-
ly correct any interference problem resulting from the installa-
tion.
D If notified by the FCC about interference, stop using the
equipment at once.
D Have the installation regularly checked and maintained.
D Keep high-frequency source doors and panels tightly shut, keep
spark gaps at correct setting, and use grounding and shielding to
minimize the possibility of interference.
ARC WELDING can cause interference.
D Electromagnetic energy can interfere with
sensitive electronic equipment such as
computers and computer-driven equipment
such as robots.
D Be sure all equipment in the welding area is
electromagnetically compatible.
D To reduce possible interference, keep weld cables as short as
possible, close together, and down low, such as on the floor.
D Locate welding operation 100 meters from any sensitive elec-
tronic equipment.
D Be sure this welding machine is installed and grounded
according to this manual.
D If interference still occurs, the user must take extra measures
such as moving the welding machine, using shielded cables,
using line filters, or shielding the work area.
OM-1546 Page 4
1-4. California Proposition 65 Warnings
Welding or cutting equipment produces fumes or gases
which contain chemicals known to the State of California to
cause birth defects and, in some cases, cancer. (California
Health & Safety Code Section 25249.5 et seq.)
This product contains chemicals, including lead, known to
the state of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after use.
1-5. Principal Safety Standards
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org or purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www.global.ihs.com).
Safe Practices for the Preparation of Containers and Piping for Welding
and Cutting, American Welding Society Standard AWS F4.1, from Glob-
al Engineering Documents (phone: 1-877-413-5184, website:
www.global.ihs.com).
Safe Practices for Welding and Cutting Containers that have Held Com-
bustibles, American Welding Society Standard AWS A6.0, from Global
Engineering Documents (phone: 1-877-413-5184,
website: www.global.ihs.com).
National Electrical Code, NFPA Standard 70, from National Fire Protec-
tion Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:
www.nfpa.org and www. sparky.org).
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 14501 George Carter Way, Suite
103, Chantilly, VA 20151 (phone: 703-788-2700, website:www.cga-
net.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:
800-463-6727, website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protec-
tion, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-
site: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFPA Standard 51B, from National Fire Protection Association,
Quincy, MA 02269 (phone: 1-800-344-3555, website: www.nfpa.org.
OSHA, Occupational Safety and Health Standards for General Indus-
try, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,
and Part 1926, Subpart J, from U.S. Government Printing Office, Super-
intendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—
phone for Region 5, Chicago, is 312-353-2220, website:
www.osha.gov).
Applications Manual for the Revised NIOSH Lifting Equation, The Na-
tional Institute for Occupational Safety and Health (NIOSH), 1600
Clifton Rd, Atlanta, GA 30333 (phone: 1-800-232-4636, website:
www.cdc.gov/NIOSH).
1-6. EMF Information
Electric current flowing through any conductor causes localized electric
and magnetic fields (EMF). Welding current creates an EMF field
around the welding circuit and welding equipment. EMF fields may inter-
fere with some medical implants, e.g. pacemakers. Protective
measures for persons wearing medical implants have to be taken. For
example, restrict access for passers−by or conduct individual risk as-
sessment for welders. All welders should use the following procedures
in order to minimize exposure to EMF fields from the welding circuit:
1. Keep cables close together by twisting or taping them, or using a
cable cover.
2. Do not place your body between welding cables. Arrange cables
to one side and away from the operator.
3. Do not coil or drape cables around your body.
4. Keep head and trunk as far away from the equipment in the
welding circuit as possible.
5. Connect work clamp to workpiece as close to the weld as
possible.
6. Do not work next to, sit or lean on the welding power source.
7. Do not weld whilst carrying the welding power source or wire
feeder.
About Implanted Medical Devices:
Implanted Medical Device wearers should consult their doctor and the
device manufacturer before performing or going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating operations.
If cleared by your doctor, then following the above procedures is recom-
mended.
OM-1546 Page 9
2-5. Principales normes de sécurité
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org or purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www.global.ihs.com).
Safe Practices for the Preparation of Containers and Piping for Welding
and Cutting, American Welding Society Standard AWS F4.1, from Glob-
al Engineering Documents (phone: 1-877-413-5184, website:
www.global.ihs.com).
Safe Practices for Welding and Cutting Containers that have Held Com-
bustibles, American Welding Society Standard AWS A6.0, from Global
Engineering Documents (phone: 1-877-413-5184,
website: www.global.ihs.com).
National Electrical Code, NFPA Standard 70, from National Fire Protec-
tion Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:
www.nfpa.org and www. sparky.org).
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 14501 George Carter Way, Suite
103, Chantilly, VA 20151 (phone: 703-788-2700, website:www.cga-
net.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:
800-463-6727, website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protec-
tion, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-
site: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFPA Standard 51B, from National Fire Protection Association,
Quincy, MA 02269 (phone: 1-800-344-3555, website: www.nfpa.org.
OSHA, Occupational Safety and Health Standards for General Indus-
try, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,
and Part 1926, Subpart J, from U.S. Government Printing Office, Super-
intendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—
phone for Region 5, Chicago, is 312-353-2220, website:
www.osha.gov).
Applications Manual for the Revised NIOSH Lifting Equation, The Na-
tional Institute for Occupational Safety and Health (NIOSH), 1600
Clifton Rd, Atlanta, GA 30333 (phone: 1-800-232-4636, website:
www.cdc.gov/NIOSH).
2-6. Informations relatives aux CEM
Le courant électrique qui traverse tout conducteur génère des champs
électromagnétiques (CEM) à certains endroits. Le courant de soudage
crée un CEM autour du circuit et du matériel de soudage. Les CEM
peuvent créer des interférences avec certains implants médicaux
comme des stimulateurs cardiaques. Des mesures de protection pour
les porteurs d’implants médicaux doivent être prises: Limiter par
exemple tout accès aux passants ou procéder à une évaluation des
risques individuels pour les soudeurs. Tous les soudeurs doivent
appliquer les procédures suivantes pour minimiser l’exposition aux
CEM provenant du circuit de soudage:
1. Rassembler les câbles en les torsadant ou en les attachant avec
du ruban adhésif ou avec une housse.
2. Ne pas se tenir au milieu des câbles de soudage. Disposer les
câbles d’un côté et à distance de l’opérateur.
3. Ne pas courber et ne pas entourer les câbles autour de votre
corps.
4. Maintenir la tête et le torse aussi loin que possible du matériel du
circuit de soudage.
5. Connecter la pince sur la pièce aussi près que possible de la
soudure.
6. Ne pas travailler à proximité d’une source de soudage, ni
s’asseoir ou se pencher dessus.
7. Ne pas souder tout en portant la source de soudage ou le
dévidoir.
En ce qui concerne les implants médicaux :
Les porteurs d’implants doivent d’abord consulter leur médecin avant
de s’approcher des opérations de soudage à l’arc, de soudage par
points, de gougeage, du coupage plasma ou de chauffage par induc-
tion. Si le médecin approuve, il est recommandé de suivre les
procédures précédentes.
OM-1546 Page 11
SECTION 3 − DEFINITIONS
3-1. Manufacturers Warning Label Definitions
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012−05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2012−05
3-2. Miscellaneous Symbols And Definitions
I
1
Primary Current
A
Amperes
V
Volts
Direct Current
(DC)
Read Instructions
U
1
Primary Voltage
I
2
Rated Welding
Current
Percent
Notes
OM-1546 Page 12
SECTION 4 − INSTALLATION
4-1. Specifications
Type Of
Input Power
Welding
Power
Source Type
Wire Feed
Speed
Range
Wire
Diameter
Range
Input
Welding
Circuit
Rating
Max. Wire
Spool
Capacity
Overall
Dimensions
Weight
Open-Circuit/
Arc Voltage,
15 To 100
Volts DC
Constant
Voltage (CV)
Or Constant
Current (CC)
DC
Standard:
50 To 700 ipm
(1.3 To 18
mpm)
Low Speed:
25 To 325 ipm
(0.6 To 8.2
mpm)
Depending On
Arc Voltage
Standard:
.023 To 5/64 in.
(0.6 To 2 mm)
Low Speed:
5/64 To 7/64 in.
(2 To 2.8 mm)
500 Amperes
At 100%
Duty Cycle
10 Thru 60 lb
(4.5 Thru 27
kg)
Length: 22-1/2
in. (572 mm)
Width: 10-3/4
in. (273 mm)
Height: 10 in.
(254 mm)
33 lb (15 kg)
OM-1546 Page 13
4-2. Installing And Aligning Wire Guide And Drive Roll
3/16 in.
Ref. ST-091 547-D / Ref. ST-112 370-C / S-0856
When changing wire size or type,
check drive roll and wire guide size
(see Parts List).
Installing Wire Guide And Drive
Rolls:
1 Drive Roll Nut
2 Drive Roll Carrier
Turn nut one click until lobes of nut
line up with lobes of drive roll carrier.
3 Drive Roll
Slide drive roll onto drive roll carrier.
Turn nut one click.
Repeat procedure for top drive roll.
4 Inlet Wire Guide Screw
5 Inlet Wire Guide
Loosen screw. Install inlet guide so
screw is centered in groove in
guide, or so tip is as close to drive
rolls as possible without touching.
Tighten screw.
Aligning Wire Guide And Drive
Rolls:
6 Adjustment Screw
Only top drive roll alignment is ad-
justable. Turn adjustment screw in
or out until groove in drive roll lines
up with wire guide as shown.
Cleaning Drive Rolls:
Remove drive rolls, and clean
grooves using a wire brush.
Tools Needed:
3/8 in.
3
5
6
5
4
2
1
3
OM-1546 Page 14
1 CV Welding Power Source
With 24 VAC Power
2 CC Welding Power Source
Without Contactor
3 External Secondary Contactor
4 Remote Contactor Cord
5 Weld Cable
6 Work
4-3. Typical Connections
1
6
5
6
5
3
2
4
! Turn Off wire feeder and
welding power source. Stop
engine on welding generat-
or.
! Weld voltage is present at
voltage sensing clamp
when wire feeder and weld-
ing power source are on.
This condition exists even if
wire feeder lights and
meters are off.
Turn off wire feeder or weld-
ing power source before
handling or moving voltage
sensing clamp.
1 Gun Securing Knob
2 Gun Block
3 Gun Outlet Wire Guide
Loosen knob, insert gun into block.
Position outlet wire guide as close
as possible to drive rolls without
touching. Tighten knob.
4 Gun Trigger Plug
5 Gun Trigger Receptacle
6 Volt Sense Lead
7 Weld Cable From Welding
Power Source
4-4. Connecting Welding Gun, Volt Sense Lead, And Weld Cable
ST-091 547-D
2
1
3
4
5
6
7
Tools Needed:
9/16 in.
OM-1546 Page 15
1 Gas Hose With 5/8-18 Right-
hand Thread Fittings (Cus-
tomer Supplied)
. Shielding gas pressure not to
exceed 100 psi (689 kPa).
Close valve on cylinder when fin-
ished welding.
4-5. Connecting Shielding Gas (Optional)
Ref. ST-158 789
Tools Needed:
1
5/8 in.
4-6. Installing Welding Wire And Adjusting Hub Tension
Ref. ST-158 788 / ST-091 601-A
1 Retaining Ring
2 Wire Spool
3 Hub
4 Spool Support
If necessary, move hub on support
for use of different size wire spool.
Remove retaining ring, and install
spool so hub pin fits spool hole. Re-
install retaining ring.
5 Hub Tension Adjustment Nut
Adjust tension nut so only a slight
force is needed to turn spool.
6 Adapter Plates (Optional)
7 Spacer
Insert tabs on spool through holes
in adapter plates and bend over.
Tools Needed:
3
2
1
5
4
15/16 in.
6
7
OM-1546 Page 16
1 Pressure Assembly Adjust-
ment Knob
Lay gun cable out straight.
A Open pressure assembly,
hold wire tightly, and cut off
end. Push wire through
guides into gun.
B Close and tighten pressure
assembly. Press gun trig-
ger until wire comes out
gun.
C To adjust wire pressure,
feed wire against wooden
surface and tighten knob
so wire does not slip.
D Cut off wire, and close
door.
B
4-7. Threading Welding Wire
Tools Needed:
9/16 in.
Ref. ST-158 897 / S-0627-A
WOOD
C D
A
Tighten
1
OM-1546 Page 17
SECTION 5 − OPERATION
5-1. Controls
Ref. ST-091 547-D / ST-176 214
2
4
Selector Switch for
Type of Power Source
Constant Voltage CV
Constant Current (drooper) CC
S-090 438-D
1 Wire Speed Control (See Sec-
tion 5-2)
2 Power Control Switch
3 Supplementary Protector CB1
CB1 protects wire feeder from over-
load.
Correct problem and manually re-
set breaker.
4 CV/CC Switch
1
3
OM-1546 Page 18
Wire Speed Setting
CC Mode
100 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100
222
254
268
295
314
342
365
388
406
429
452
480
498
526
549
572
595
623
205
234
246
271
288
313
334
354
370
391
412
437
453
478
499
520
541
566
188
213
224
246
261
284
302
320
335
353
372
394
408
430
449
468
486
508
170
193
203
222
235
254
271
287
299
315
331
351
364
383
399
415
432
451
153
172
181
197
208
225
239
253
264
277
291
308
319
336
349
363
377
394
136
152
159
173
182
196
208
219
228
240
251
265
274
288
300
311
323
337
119
132
137
148
156
167
176
185
192
202
211
222
229
240
250
259
268
279
102
111
115
124
129
138
145
151
157
164
171
179
184
193
200
207
214
222
84
91
94
99
103
108
113
118
121
126
130
136
140
145
150
154
159
165
67
70
72
75
76
79
82
84
86
88
90
93
95
98
100
102
105
107
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
76
78
81
84
88
91
94
97
100
103
106
109
111
114
116
119
122
124
102
106
112
118
126
134
138
145
151
156
161
167
172
177
183
188
194
198
127
133
143
152
164
174
183
192
201
209
217
226
234
241
249
256
266
272
153
161
174
186
202
215
227
239
252
262
272
284
294
305
315
325
338
346
179
189
205
220
241
256
271
287
302
315
328
343
356
369
382
394
410
420
205
217
235
254
277
297
315
334
352
367
383
402
417
432
448
463
481
494
231
247
266
288
317
338
359
381
403
420
439
460
478
496
514
532
553
568
256
272
297
322
355
380
404
428
453
473
494
519
540
560
580
600
625
642
282
300
328
356
393
421
448
476
503
526
550
577
601
623
647
669
697
716
308
328
359
390
431
462
492
523
554
579
605
636
662
687
713
738
769
790
Arc
Voltage
Wire Speed Setting
CV Mode
INCHES PER MINUTE* INCHES PER MINUTE*
*Rounded off
Wire Speed Setting
CC Mode
100 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100
101
115
122
134
143
155
166
176
184
195
205
218
226
239
249
260
270
283
93
106
112
123
152
177
206
236
85
97
102
112
137
160
185
212
77
88
92
101
123
143
165
188
69
78
82
89
94
102
108
126
145
165
62
69
72
79
83
89
94
109
124
141
54
60
62
67
71
76
80
92
104
118
46
50
52
56
59
63
66
74
84
94
38
41
43
45
47
49
51
57
64
70
30
32
33
34
34
36
37
40
43
46
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
23 34 46 58 69 81 93 105 116 128 140
Arc
Voltage
Wire Speed Setting
CV Mode
INCHES PER MINUTE* INCHES PER MINUTE*
*Rounded off
107
115
118
129
131
142
161
168
145
152
130
136
115
120
99
103
84
87
69
71
54
55
38
39
41
42
44
45
48
49
59
62
66
68
72
75
78
81
88
91
97
101
96
101
109
113
122
127
114
120
131
136
147
153
132
140
153
158
171
179
150
159
174
181
196
205
169
179
195
204
221
231
187
198
217
226
246
257
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
35
37
38
40
41
43
44
45
47
48
49
50
52
53
54
55
56
48
51
57
61
63
66
69
71
73
76
78
80
83
85
88
90
60
65
69
74
79
83
87
91
95
98
103
106
109
113
116
121
123
73
79
84
92
98
103
108
114
119
123
129
133
138
143
148
153
157
86
93
100
109
116
123
130
137
143
149
156
162
167
173
179
186
190
98
107
115
126
135
143
152
160
167
174
182
189
196
203
210
218
224
112
121
131
144
153
163
173
183
191
199
209
217
225
233
241
251
258
123
135
146
161
172
183
194
206
215
224
236
245
254
263
272
284
291
136
149
162
178
191
203
216
228
239
250
262
273
283
294
304
316
325
149
163
177
196
210
223
237
251
263
275
289
300
312
324
335
349
359
54
S-32S Models
S-32SL Models
5-2. Wire Speed Control Settings
OM-1546 Page 19
SECTION 6 − MAINTENANCE & TROUBLESHOOTING
6-1. Routine Maintenance
! Disconnect power
before maintaining.
. Maintain more often
during severe conditions.
3 Months
Replace
Unreadable
Labels
Clean And
Tighten
Weld
Terminals
Repair Or
Replace
Cracked
Weld Cable
Gas HoseGun Cable
Replace
Cracked
Parts
6 Months
Blow Out Or Vacuum
Inside,
During Heavy Service,
Clean Monthly
OR
Clean
Drive
Rolls
6-2. Troubleshooting
! Disconnect power before troubleshooting.
Trouble Remedy
Wire does not feed; open-circuit voltage
available.
Check Supplementary Protector CB1 and reset (see Section 5-1).
Check sensing lead connection.
Check gun trigger plug connection.
Check gun trigger. See gun Owners Manual.
Have Factory Authorized Service Agency check drive motor and control board PC1.
Wire feeds erratically. Readjust hub tension (see Section 4-6).
Readjust drive roll pressure (see Section 4-7).
Use correct size drive roll (see Parts Listing)
Clean or replace dirty or worn drive roll (see Section 4-2).
Remove weld spatter around nozzle opening.
Replace contact tube or liner. See gun Owners Manual.
Have Factory Authorized Service Agency check drive motor and control board PC1.
Wire feeds as soon as power is applied. Check gun trigger. See gun Owner’s Manual.
Wire stubbing on low end using a con-
stant current power source.
Make sure CC/CV switch is in CC position (see Section 5-1).
Increase output setting of power source.
Gas does not flow or does not stop flow-
ing; wire feeds.
Check optional gas valve. Have Factory Authorized Service Agency check drive and motor control board
PC1 and optional gas control board PC50.
OM-1546 Page 21
Notes
SOCKET/WRENCH SELECTION TABLE
(U.S. STANDARD)
SOCKET/WRENCH SELECTION TABLE
(METRIC)
Specifications Socket or Wrench Size Specifications Socket or Wrench Size
Bolt
Diameter
Decimal
Equivalent
Bolt Nut
Bolt
Diameter
U.S.
Decimal
Equivalent
Bolt Nut
1/4 in. .250 in. 3/8 in. 7/16 in. 6 mm .2362 in. 10 mm 10 mm
5/16 in. .3125 in. 1/2 in. 9/16 in. 8 mm .3150 in. 14 mm 14 mm
3/8 in. .375 in. 9/16 in. 5/8 in. 10 mm .3937 in. 17 mm 17 mm
7/16 in. .4375 in. 5/8 in. 3/4 in. 12 mm .4724 in. 19 mm 19 mm
1/2 in. .500 in. 3/4 in. 13/16 in. 14 mm .5512 in. 22 mm 22 mm
9/16 in. .5625 in. 7/8 in. 7/8 in. 16 mm .6299 in. 24 mm 24 mm
5/8 in. .625 in. 15/16 in. 1 in. 18 mm .7087 in. 27 mm 27 mm
3/4 in. .750 in. 1-1/8 in. 1-1/8 in. 22 mm .8661 in. 32 mm 32 mm
7/8 in. .875 in. 1-5/16 in. 1-5/16 in. 24 mm .9449 in. 36 mm 36 mm
1 in. 1.000 in. 1-1/2 in. 1-1/2 in.
OM-1546 Page 22
SECTION 8 − PARTS LIST
Figure 8-1. Main Assembly
ST-091 506-K
. Hardware is common and
not available unless listed.
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
15
14
17
18
19
22
21
20
12
23
24
25
26
27
28
29
30 − FIG. 8−2
31
33
34
35
36
32
37
38
39
40
41
42
OM-1546 Page 23
Figure 8-1. Main Assembly
Description Quanti
ty
Part
No.
Dia.
Mkgs.
Item
No.
1 097 770 Label, Warning Electric Shock Can Kill 1.. ................ .. ............................
2 +089 818 Wrapper 1.. ............... .. ......................................................
3 134 464 Label, Warning General Precautionary 1.. ................ .. ............................
4 +089 823 Door, Access 1.. ............... .. ..................................................
5 151 187 Latch, Slide Flush 1.. ................ .. ..............................................
6 PC1 139 704 Circuit Card, Control Motor 1.. ..... ..... .. ......................................
PLG66 135 557 Housing Plug & Sockets 1......... .... .. ........................................
128 673 Washer, Shldr Nyl .625 Od X .203 Id X .312Dia Shldr 4..................... .. ...............
PLG50 083 526 Housing Receptacle & Sockets 1......... .... .. ..................................
RC50 072 802 Housing Plug & Pins, (Incl. W/Motor Control Board PC1) 1.......... ..... .. ............
7 073 756 Stand-Off, No. 6-32 X .625 Lg 4.. ................ .. ...................................
8 S3 011 770 Switch, Tgl Spdt 5A 125V 1.. ...... ...... .. .......................................
9 +109 627 Case, Feeder 1.. ............... .. ..................................................
000 527 Blank, Snap-In .875Mtg Hole 1..................... .. ....................................
10 090 099 Insulator, Gun Holder 1.. ............... .. ...........................................
11 089 847 Handle, Lifting 1.. ............... .. .................................................
12 072 094 Hub & Spindle, (Consisting Of) 1.. ............... .. ..................................
13 135 205 Nut, Stl Slflkg Hex Reg .625-11 W/Nyl Insert 1.. ............... .... .....................
14 010 191 Washer, Fbr .656 Id X 1.500 Od X .125Thk 2.. ............... .... ......................
15 058 628 Washer, Brake Stl 2.. ............... .... ............................................
16 058 428 Hub, Spool 1.. ............... .... ..................................................
17 057 971 Washer, Flat Stl Keyed 1.500Dia X .125Thk 1.. ............... .... .....................
18 010 233 Spring, Cprsn .970 Od X .120 Wire X 1.250 1.. ............... .... ......................
19 180 572 Shaft, Spool Support 1.. ............... .... .........................................
20 058 427 Ring, Retaining Spool 1.. ............... .... .........................................
21 085 711 Pipe, Plstc 2.000 X 1.000 1.. ............... .. .......................................
22 088 425 Adapter, Spool 2.. ............... .. .................................................
108 008 Reel, Wire 60 Lb (Consisting Of) 1................... .. .................................
124 900 Support, Reel Spool 1..................... .... ..........................................
168 103 Nut, Spanner Retaining 1..................... .... .......................................
+168 104 Retainer, Spool Support 1.................... .... .......................................
23 044 800 Washer, Spring Grip Lkg .750 1.. ............... .. ....................................
24 131 181 Wire Guide & Nut, Inlet 1.. ............... .. .........................................
25 057 357 Bushing, Snap-In .937 Id X 1.125Mtg Hole 1.. ............... .. ........................
26 089 827 Skid, Case 2.. ............... .. ....................................................
27 R102 073 562 Potentiometer, C Std Slot 1/T 2W 10K Ohm 1.. .... ..... .. .......................
28 090 439 Label, Warning Electric Shock Can Kill 1.. ............... .. ............................
29 098 075 Insulation, Motor 1.. ............... .. ...............................................
30 Fig 7-2 Motor & Wire Drive 1.. ................ .. .............................................
047 838 Blank, Snap-In 1 In Hole 1..................... .. ........................................
31 126 693 Cable, Sensing 15Ft (Consisting Of) 1.. ............... .. ..............................
261 163 Label, Warning Electric Shock/Volt Sense Clamp 1..................... .... .................
32 096 776 Cable, Extension Trigger (Consisting Of) 1.. ............... .. ..........................
33 PLG52 080 328 Receptacle W/Sockets, Free Hanging 1.. ... .... .... ...........................
34 048 834 Connector, Circ Clamp Str Rlf 1.. ............... .... ..................................
35 049 455 Cable, Port No. 18 2/C (Order By Ft) 2Ft.. ............... .... ...........................
36 PLG60 110 760 Housing Plug & Pins 1.. ... .... .... ..........................................
PLG61 110 759 Housing Receptacle & Sockets 1......... .... .. ..................................
PLG64,65 109 640 Housing Plug & Pins 2........ ... .. ...........................................
37 090 440 Insulator, Cover Drive Housing 1
.. ............... .. ...................................
38 Nameplate, (Order By Model And Serial Number) 1.. .......................... ..................
39 057 358 Bushing, Snap-In Nyl 1.000 Od X 1.375Mtg Hole 2.. ............... .. ...................
40 097 922 Knob, Pointer 1.. ............... .. ..................................................
41 CB1 089 807 Supplementary Protector, Man Reset 1P 2.5A 250V 1.. .... ..... .. ................
42 S1 011 609 Switch, Tgl Spdt 15A 125VAC 1.. ..... ...... .. ...................................
42 S1 011 611 Switch, Tgl Dpdt 15A 125V 1.. ..... ..... .. ......................................
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
Part of Optional 122 970 Remote Voltage/Contactor Control.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Miller MD010951V Owner's manual

Category
Welding System
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages