Nesco CC-32 User manual

Page is loading ...

1

English

- This product is designed for household use only -

When using electrical appliances, basic safety precauons should always be followed,

including the following:

IMPORTANT SAFEGUARDS

1. READ ALL INSTRUCTIONS.

2. Do not touch hot surfaces. Use handles or knobs.

3. To protect against electrical shock and personal injury, do not immerse this appliance,

including cord and plug, in water or other liquid.

4. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilies, or lack of experience and knowledge, unless they

have been given supervision or instrucon concerning use of the appliance by a person

responsible for their safety.

5. Close supervision is necessary when any appliance is used by or near children.

6. Unplug from outlet when not in use and before cleaning. Allow to cool completely before

pung on or taking o parts, and before cleaning.

7. Do not operate any appliance with a damaged cord or plug or aer the appliance

malfuncons or has been damaged in any manner. To avoid hazards, return appliance to

NESCO

®

Factory Service Department for examinaon, repair or adjustment.

8. The use of aachments, including canning jars, not recommended by the manufacturer

may cause a risk of injury to persons.

9. Do not use outdoors.

10. Do not let cord hang over edge of table or counter, or touch hot surfaces.

11. Do not place on or near a hot gas or electrical burner or in a heated oven.

12. Do not use appliance for other than its intended use, as described in this manual.

13. Operate appliance only when all parts are fully engaged and secured.

14. Never place ngers or other utensils into feed or discharge areas.

15. Check ice hopper for presence of foreign objects before using. Remove if necessary.

16. Do not use appliance to cut frozen foods, bones or pied fruits.

17. Make sure the motor stops completely and power cord is removed before removing or

assembling any items.

18. Avoid contacng moving parts.

19. Keep hands and utensils out of container while operang to reduce the risk of severe

injury or damage to the appliance.

20. Blades are sharp! Handle carefully.

SAVE THESE INSTRUCTIONS

Polarized Plug: This appliance has a polarized plug (one blade is wider than the other). To

reduce risk of electric shock, plug is intended to t into polarized outlet only one way. If

the plug does not t fully into the outlet, reverse the plug. If it sll does not t, contact a

qualied electrician. Do not try to modify the plug in any way.

Short Cord Instrucons: A short power supply cord is provided to reduce the risk resulng

from becoming entangled in or tripping over a longer cord. Extension cords may be used

if care is exercised in their use. If an extension cord is used, the marked electrical rang of

the cord should be at least as great as the electrical rang of the appliance. The longer cord

should be arranged so that it will not drape over the tabletop where it can be pulled on by

children or tripped over unintenonally.

2

English

FEATURES

BEFORE FIRST USE

1. Read and understand all instrucons and keep for future reference.

2. Remove all packaging and labels.

3. Clean all parts, except Base, following the instrucons in the ‘Care and Cleaning ’ secon.

NOTE: BE CAREFUL WHEN WIPING AROUND THE SHAFT, SHAVING BLADE IS SHARP.

4. Wipe the Base with a damp cloth. NEVER IMMERSE THE BASE IN WATER OR ANY OTHER

LIQUID

.

OPERATION

1. Place base on a at, stable surface. Be sure the unit is disconnected from electrical outlet

before installing or removing any components.

2. Place Shaving Chamber into Base and ensure it is seated on the Sha (Fig. 1).

3. Twist sha counter-clockwise to lock Ice Chamber into place (Fig. 2).

4. Place Mixing Paddle into Ice Bowl. (Fig 3). If mixing

with ingredients, put ingredients into Ice Bowl.

5. Insert Ice Bowl into groove on Base, li slightly and

turn clockwise unl it locks (Fig 4). This will allow

the mixing paddle to mix ice and ingredients while

operang.

6. Turn Selector Knob to desired crushed ice seng.

7. Place ice into Shaving Chamber, do not exceed

Maximum ll line. DO NOT USE WHILE EMPTY OR

WITHOUT ICE BOWL AND LID IN PLACE.

8. Plug cord into 120V electrical outlet.

9. Place Lid onto Base and turn counter-clockwise to

engage interlock switch (Power On/O). The unit

will start and begin to shave ice.

10. Turn the Lid clockwise to stop. Remove Ice Bowl by

turning counter-clockwise to unlock and slide to remove.

C

O

U

R

S

E

Ο

F

I

N

E

FIG. 1

FIG. 2

FIG. 3

FIG. 4

Ice Shaving

Chamber

Lid

Sha

Mixing

Paddle

Base

Ice Bowl

Selector Control

3

English

CARE AND CLEANING INSTRUCTIONS

1. Unplug cord from electrical outlet.

2. Clean base with a so, wet cloth and mild cleaning soluon. Wipe dry. NEVER IMMERSE

THE BASE IN WATER OR ANY OTHER LIQUID.

3. Clean all removeable parts in hot, soapy water. rinse and dry well. CAUTION - SHAVING

CHAMBER HAS BLADES THAT ARE SHARP, USE CARE WHEN CLEANING!

4. Never use aggressive cleansers or metal scouring pads to clean components.

4

English

ONE YEAR LIMITED WARRANTY

This appliance is warranted for one year from date of original purchase against defects in

material and workmanship. This warranty does not cover transportaon damage, misuse,

accident or similar incident. This warranty gives you specic legal rights and you may have

other rights, which vary from state to state. This product is intended for household use only,

not for commercial use. Warranty does not cover commercial use.

Your new NESCO

®

appliance comes equipped with numerous safety features. Any aempt

to interfere with the operaon of these safety features makes this warranty null and void.

In the event we receive an appliance for service that has been tampered with, we reserve

the right to restore it to its original state and charge for the repair.

For service in warranty - Defecve products may be returned, postage prepaid, with a

descripon of the defect to: The Metal Ware Corporaon, 1700 Monroe Street, Two Rivers,

Wisconsin 54241, for no-charge repair or replacement at our opon.

Must include proof of purchase or copy of original bill of sale when returning product for

warranty service.

Please call Customer Sasfacon at 1-800-288-4545 to obtain a Return Authorizaon

before shipping.

• For service in warranty, follow instrucons set forth in warranty. When ordering new

parts, make sure that you always menon the model number of the product.

• Call us on our toll free number, 1-800-288-4545 and tell us about your problem.

• If we instruct you to send all or part of your appliance to us for repair or replacement,

our Customer Sasfacon representave will provide a Return Authorizaon number

(this number noes our receiving department to expedite your repair). Pack your unit

carefully in a sturdy carton with sucient padding to prevent damage because any

damage caused in shipping is not covered by the warranty.

• Print your name, address and Return Authorizaon number on the carton.

• Write a leer explaining the problem. Include the following: your name, address and

telephone number and a copy of the original bill of sale.

• Aach the sealed envelope containing the leer inside the carton. Insure the package for

the value of the NESCO

®

appliance and ship prepaid to:

An: Factory Service Dept.

The Metal Ware Corporaon

1700 Monroe Street

Two Rivers, WI 54241

Page is loading ...

1 - 800 - 288 - 4545

Nesco CC-32 User manual

Related papers

Other documents