Evo Solace Domestic Owner's manual

Brand: Evo

Model: Solace Domestic

Type: Owner's manual

Evo Solace Domestic is a dehumidifier designed to remove moisture from the air in a room without losing the warmth contained within. It is suitable for use in indoor pool areas and has a rated capacity of 4.3L/h. The unit features ultra-low noise operation, an ultra-thin casing, and a fashionable appearance. It also has a newly designed controller for easy operation and a built-in hygrostat for precise humidity control.

Page | 1

Page | 2

Contents

1 Preface .................................................................................................................................................. 3

2 Safety Precautions ................................................................................................................................. 4

2.1 Marks ............................................................................................................................................. 4

2.2 Icons............................................................................................................................................... 4

2.3 Warnings ........................................................................................................................................ 4

2.4 Attention ........................................................................................................................................ 5

3 Specifications ......................................................................................................................................... 6

3.1 Parameters ..................................................................................................................................... 6

3.2 Performance Curve ......................................................................................................................... 7

3.3 Dimensions..................................................................................................................................... 8

3.4 Working Principle ........................................................................................................................... 8

3.5 Product Features ............................................................................................................................ 9

3.6 Hygrostat Control ........................................................................................................................... 9

4 Installation ............................................................................................................................................10

4.1 Installation Precautions .................................................................................................................10

4.2 Positioning ....................................................................................................................................10

4.3 Minimum Install Distances .............................................................................................................10

4.4 Drainage ........................................................................................................................................11

5 Usage ....................................................................................................................................................12

5.1 Operation Panel Functions ............................................................................................................12

5.2 Operation Instructions ...................................................................................................................13

5.2.1 Power On/Off ........................................................................................................................13

5.2.2 Set Relative Humidity .............................................................................................................13

2.3 Dehumidifying Mode .............................................................................................................14

5.2.4 Defrosting Mode ....................................................................................................................14

5.2.5 Problem Display .....................................................................................................................14

6 Maintenance .........................................................................................................................................15

6.1 Troubleshooting ............................................................................................................................16

7 Appendix...............................................................................................................................................17

7.1 PCB I/O Port ..................................................................................................................................17

Page | 3

1 Preface

The Solace Domestic series dehumidifier is designed to remove the moisture from the air in the room

without losing the warmth contained within. The warm moist air is drawn through the base of the unit and

passes over a cold coil to remove the moisture and chemicals. The air then passes through a hot coil which

replaces the heat in the air. The result – drier air. This product strictly complies with design and production

standards to provide perfect performance and high reliability.

Ensure that the entire manual is read before the initial start up of the unit. It is important to know the

correct operating procedures for the unit and all safety precautions, to prevent the possibility of property

damage and/or personal injury. Do not modify or intervene on the unit by yourself as this could create

dangerous situations and the manufacturer will not be responsible for any damage caused.

These instructions should be kept carefully and must always accompany the appliance. If it becomes lost or

damaged, please contact EvoHeat or go to our website for a full list of online-version manuals.

Failure to comply with these recommendations will invalidate the warranty.

• T

he unit must be installed by an authorised installer.

• All repair or maintenance interventions must be performed by the technical service department or

by professionally qualified personnel.

• All repair or maintenance interventions must be performed in the specified period and times.

• Use the spare parts ONLY provided by the manufacturer.

In case of system leakage, disconnect the power to the unit and call the technical service department or

other professionally qualified personnel as soon as possible, do not intervene personally on the appliance.

If the unit is to not be used for an extended period of time, you should disconnect the power to the unit.

ACKING LIST (Fig.1)

Page | 4

2 Safety Precautions

2.1 Marks

2.2 Icons

2.3 Warnings

Page | 5

2.4 Attention

WARNING

Remember that some fundamental safety rules should be followed when using this product:

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities and lack of experience or knowledge; unless they have been given supervision

or instruction concerning the use of the appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the appliance.

2. Do not touch the unit with wet hands/body when barefoot.

3. Do not carry out any cleaning before having disconnected the unit from the electricity mains supply.

Ensure the system master switch is set to OFF.

4. Do not perform any modifications of safety or adjustment devices without authorisation from the

manufacturer.

5. Even if the unit is disconnected from the mains supply, do not pull, cut or knot the electrical cables

coming out of the unit.

6. If the supply cord is damaged, it must be replaced by the manufacturer, it’s service agent or a

imilarly qualified person in order to avoid a hazard.

7. Do not poke objects through the inlet and outlet grills.

8. Leaving packing materials in reach of children is a source of danger and they should be disposed of.

9. Do not climb onto the appliance or rest any object on it.

10. External parts of the unit can reach temperatures of more than 70°C, never touch it with your hands!

11. The unit must be installed in accordance with national wiring regulations.

Page | 6

3 Specifications

3.1 Parameters

olace Domestic Dehumidifier

Model

Unit

Solace 4.3

Rated Capacity

L/h

4.3

Dehumidification Capacity per

day

103

Max Pool Area

Noise Level @ 1M

dB(A)

Rated Voltage/Freq

220-240V~/50Hz

Rated Power Input

1.97

Rated Running Current

8.7

Max. Power Input

2.28

Max. Running Current

Relative Humidity

%RH

40~90

Temperature

°C

10~36

Dimensions (L/W/H)

See 3.3

Net Weight

See nameplate/package label

Refrigerant

R410A

Condensation Pipe Diameter

st condition: Ambient temperature: 30C, Relative humidity: 80%.

Operating limits: temperature 10C~36C

Relative humidity 40%~90%

Page | 7

3.2 Performance Curve

Page | 8

3.3 Dimensions

3.4 Working Principle

The Solace Dehumidifier works my drawing moist air over a refrigerated coil with a small fan. The cold coil of

the refrigeration device condenses the water, which is removed. Then the air is reheated by the hot coil. This

process works most effectively with higher ambient temperatures with a high dew point temperature.

For best results, we recommend that the room temperature is maintained within 5 degrees of the pool

temperature.

Page | 9

3.5 Product Features

Ultra-Low Noise

Advanced air ducting technology and the super quiet cross-flow fan allows the unit to operate with ultra-low

noise.

Ultra-Thin Casing

With the ultra-thin casing of 200mm, the ultra-compact design allows for you to save more space when

compared with

common dehumidifiers with a thickness of 400mm.

Fashionable Appearance

The unit has been designed to look elegant while maintaining maximum efficiency, your indoor pool area will

combine well with the Solace unit.

Newly Designed Controller

The simple operating display ensures that the unit is easy to operate and extremely user friendly.

3.6 Hygrostat Control

The dehumidifier is controlled by a built-in hygrostat set on one side of the unit. The target RH value can be

set in ranged from 30% to 90%. The unit will not start to dehumidify until the actual RH is beyond the setting

value. We recommend that an external hygrostat should be installed to ensure a constant measure of the

humidity in the pool area. The location of the hygrostat is as following:

Note: cold surfaces (e.g. glass) are still subject to condensation.

Page | 10

4 Installation

4.1 Installation Precautions

To ensure that the installation is performed correctly and that the appliance will perform perfectly, please

carefully follow the instructions indicated in this manual. Failure to respect the rules indicated can not only

cause malfunctions to the unit but will also invalidate the warranty; in which case EvoHeat will not be

responsible for any damage to persons or property.

It is important that the electrical installation is made according to the laws in force, respects the data

indicated in the technical sheet and that the unit is earthed correctly.

The appliance must be installed in a position that allows routine maintenance, such as filter cleaning to

occur.

4.2 Positioning

Avoid installing the unit in close proximity to:

• Positions subject to exposure to direct sunlight

• Sources of heat

• Oil Fumes

• Areas subject to high frequencies

Ensure that:

• The wall on which the unit is installed is strong enough to support the weight of the unit

• The part of the wall that the unit is installed does not have pipes or electrical wires passing through

• The wall is perfectly flat

• There are no obstacles around the unit that could interfere with the inlet and outlet air flow.

• It is preferable there is an outside perimeter-wall to allow the discharge of condensation outside.

4.3 Minimum Install Distances

Removing the four-rubber foot of the unit are suggested if it is hanging on the wall.

The following figure indicated the minimum mounting distances between the wall-mounted Solace

Dehumidifier and furniture in the room.

Page | 11

Wall Mounted Installation

Insert 5 expansion bolts into holes with are bored by 10 drill and fix the wall suspension bar horizontally.

4.4 Drainage

Select a suitable size hose to connect to the built-in hose if it is needed.

Page | 12

5 Usage

5.1 Operation Panel Functions

Page | 13

5.2 Operation Instructions

5.2.1 Power On/Off

5.2.2 Set Relative Humidity

Page | 14

5.2.3 Dehumidifying Mode

5.2.4 Defrosting Mode

5.2.5 Problem Display

Page | 15

6 Maintenance

To guarantee that the unit stays reliable and works to the best of its ability, for the longest time possible it is

suggested that the unit is maintained and cleaned every six months.

Please adhere to the following steps to clean the strainer regularly.

1) Press the two red buttons and drag it down slowly (Fig 8)

2) Separate the return air filter screen from the units as the image shown below (Fig 9)

3) Takeaway the return air filter screen and flush it with water (Fig 10)

4) Set the filter net and the air return grill to the original place and press the limiting pin (Fig 11)

5) Clean up the outer unit with a soft and damp rag (Fig 12). To protect the paint coat on the unit, don’t

use a rough sponge or corrosive detergent.

Page | 16

6.1 Troubleshooting

Press the “UP’ or “DOWN” key to check if there are any more failure codes.

The solutions to the problems can be found with their corresponding code.

Malfunction

Code

Reason

Solution

High pressure protection has

appeared 3 times in 30 mins

High pressure protection is too

frequent

Check the below

solutions to failure

P1/P2/P3

High pressure protection

Discharge pressure is too high

Condenser outlet temp. over

high

Condenser coil temp. is too high

Evaporator outlet temp.

sensor failure

This temp. sensor is broken or in

open/short circuit

Check or replace temp.

sensor

Evaporator inlet temp. sensor

failure

This temp. sensor is broken or in

open/short circuit

Check or replace temp.

sensor

Condenser outlet temp. sensor

failure

This temp. sensor is broken or in

open/short circuit

Check or replace temp.

sensor

Humidity sensor failure

Humidity sensor is broken or in

open/short circuit

Check or replace

humidity sensor

Motor feedback signal failure

The feedback wiring has a bad

connection or fan motor is damaged

Check the feedback

wiring of the fan motor

or replace the fan motor

Solution to failure P1/P2/P3:

1) If P1/P2/P3 appears together with other failures, please solve the others first.

2) If there is no other failures of P3~E0, and P1 & P2 still exist, please disconnect the power to the unit

and connect again after 1 hour.

3) If only P3 exists, please keep the fan running for 30 mins. If P3 still exists after the running, please

disconnect the power to the unit and connect again after 1 hour.

Note: Please contact Technical Service if failures cannot be solved.

Page | 17

7 Appendix

7.1 PCB I/O Port

Explanation:

Ports

Meaning

Cn1

To operation panel

CN4

NET1

NET2

Reserved

To fan motor (DC)

TEMP1

To evaporator inlet/outlet temp. sensor

TEMP2

To condenser outlet temp. sensor

HUMI01

To the build-in RHS (Refer to 7.2)

HUMI02

To the external RHS (optional)

CN7

To high-pressure protection switch

EEV

To electronic expansion valve

PROG1

Program burning port

To the live wire of power supply

N_Comp

N_Valve

Neutral wire

L_Comp

To the live wire of compressor

Evo Solace Domestic Owner's manual

Evo Solace Domestic Owner's manual

Evo Solace Domestic Owner's manual

Related papers

Other documents