NIX Advance X15D User manual

Brand
NIX
Model
Advance X15D
Category
Digital photo frames
Type
User manual

This manual is also suitable for

Digital Frame
X10G
User Manual
4
1.
1.1
1.2
1.3
1.4
FRAME OVERVIEW
Front of Frame
Back of Frame
Remote Control
Box Contents
Contents
2. FRAME SETUP
6
7
13
15
16
3. GETTING STARTED
4.
SAFETY & COMPLIANCE
5.
TROUBLESHOOTING
6.
ONE-YEAR WARRANTY
3.1
3.2
3.3
3.4
3.5
Main Menu
Play
On-screen Options
Calendar
Settings
6.1
6.2
6.3
6.4
6.41
6.42
Notes of Importance
Important Safety Information
Adaptor Information
Compliance Information
FCC Compliance
IC Compliance
P. 4
Frame Overview
1
Front of Frame
Back of Frame
Remote Control
1.1
1.2
1.3
ON / OFF
Turns Digital Frame on or puts it
into standby
Slide Show
Starts the slideshow (photos only)
UP/DOWN/LEFT/RIGHT
4-way navigation pad/ video
playback control
Motion Sensor
Senses movement and turns the
Digital Frame ON and OFF
Play
Select/Play/Pause
Back
Go Back a step
Settings
Go to Settings Menu
Infra-red Sensor
Receives signals from the remote
control
4-way Navigation Pad
and Play/Pause button
Helps you navigate and select
Power Button
Turns Digital Frame on or puts it
into standby
Menu Button
This will allow you to go back a
step
SD/SDHC Card Slot
Connect and view photos and
videos from the memory card
USB Port
Connect your USB memory stick
and view photos and videos
Headphone/Speaker port
Connect your headphones or
speakers
Power Adaptor DC-in (5V)
Plug in power cable for power
A
K
L
M
B
N
O
P
K
O
LPNM
A
B
C
IED HGF
C
D
E
F
G
H
I
P. 5
Box Contents1.4
Digital Frame
Remote Control
Power Adaptor
USB Memory Stick
P. 6
Frame Setup
2
Plug in the Power Adaptor to your Digital Frame:
Then plug your Digital Frame cable into a power source and remove the plastic tab from your
Remote.
P. 7
Main Menu3.1
Once powered on, the digital frame will load and you will be greeted by the Main Menu screen.
Navigate the Main Menu using the 4-way navigation pad on the remote control or back of
the frame.
Press to select an option.
Play3.2
Insert an SD Card and/or a USB Stick into the back of your Digital Frame. Once the
frame successfully reads your media device, a notication “New storage is ready to
use” will appear.
Select what media device you want to play content from (media device will not be
selectable if not inserted):
Play All Photos
Play All Videos
Play All Media
Browse
Play
Calendar
Settings
View content from your inserted storage devices
View photos within a calendar
Congure the settings for your Digital Frame
All JPEG photo les will be played
All MP4 video les will be played
All photos and videos will be played
Search for photos and videos you want to play
Press to select an option.
Getting Started
3
P. 8
On-screen Options3.3
During photo and video playback, you can select on the remote control to bring
up the on-screen settings for the media content you are displaying.
Once you have nished adjusting the on-screen settings, press to return to media.
Picture Settings
ITEM DESCRIPTION OPTION
Zoom Magnify photo
None
140%
200%
280%
400%
Rotate
Adjust orientation of photo (orientation is
saved on inserted media device)
None
90
180
270
Brightness Adjust brightness of display 0-100
Contrast Adjust contrast of display 0-100
Saturation Adjust saturation of display 0-100
Hue Adjust hue of display 0-100
Slideshow Interval
Select time duration for a photo to be
displayed
3s
5s
10s
30s
60s
1hr
Screen Mode
Select how photos are displayed on your
Digital Frame screen
Fill
Fit
Delete File
Permanently delete le from inserted
media device
-
Go To Main Settings Adjust Digital Frame settings -
P. 9
Video Playback
Video Settings
Play/Pause Video
Fast Forward/Rewind Video (Hold down to increase speed, release to resume playback)
Audio Volume Control
Hide Playback control
During video playback, press on the remote control to access the playback control.
ITEM DESCRIPTION OPTION
Brightness Adjust brightness of display 0-100
Contrast Adjust contrast of display 0-100
Saturation Adjust saturation of display 0-100
Hue Adjust hue of display 0-100
Screen Mode
Select how videos are displayed on your
Digital Frame screen
Fill
Fit
Rotate Adjust orientation of video
None
90
180
270
Delete File
Permanently delete le from inserted
media device
-
Go To Main Settings Adjust Digital Frame settings -
P.10
Calendar3.4
Display a Calendar and Clock over your photos from your inserted default media
device. Please note that videos will not play in Calendar mode.
To congure the time, this can be changed in Time Settings in the Settings Menu
(Sect 3.5)
Settings3.5
Navigate the Settings Menu using the 4-way navigation pad on the remote control
or back of the frame. There are three options:
Display
Time
General
Change the settings of your display and slideshow
Set the clock and calendar time
Congure settings for your frame
Press to select an option.
P.11
Display
ITEM DESCRIPTION OPTION
Brightness Adjust brightness of display 0-100
Contrast Adjust contrast of display 0-100
Saturation Adjust saturation of display 0-100
Hue Adjust hue of display 0-100
Rotate Screen Change orientation of user interface
None
90
180
270
Slideshow Effect
Select a transition effect in between
photos
Persian Blind H
Persian Blind V
Slide Up
Slide Down
Slide Left
Slide Right
Mosaic
Random
Slideshow Interval
Select the time duration for a photo to be
displayed
3s
5s
10s
30s
60s
1hr
Slideshow Order Sort the order of media playback
A-Z
Date
Shufe
Screen Mode
Select how media is displayed on your
Digital Frame screen
Fill
Fit
P.12
Time
General
ITEM DESCRIPTION OPTION
Clock on Slideshow Select Time Option Display
Time
Time & Date
Disable
Time Format Adjust Time Format
12 HR
24 HR
Calendar Format Adjust Calendar Format
Sunday-Saturday
Monday-Sunday
Set Date Set Calendar Date YYYY/MM/DD
Set Time Set Clock Time HH:MM:SS
ITEM DESCRIPTION OPTION
Media Priority Select what media device is played rst
SD
USB
Autoplay
Auto-play specied media content when
media device is inserted or frame is
powered on
Photo
Video
Photo & Video
Disable
Movie Repeat Mode Select to loop single video or all videos
Repeat One
Repeat All
Audio Volume Adjust audio volume 0-100
Mute ‘All Media’
Select if you want audio prompt before
media playback
Always Ask
Always Play Audio
Never Play Audio
Motion Sensor
Select time duration for frame to go
into standby mode when no motion is
detected (If you do not want to use the
motion sensor, select disable)
Disable
5 minutes
10 minutes
30 minutes
1 hour
Restore Factory Default Set all frame settings to default -
About
Gives frame information (including
rmware)
-
P.13
Q: Why will my Digital Frame not turn on?
If you suspect the power adaptor might be faulty, contact us at http://support.nixplay.com
and we will send you a new one. Be sure to provide the frame model you have and your
address.
Q: Certain Video les are not playing properly. Why?
This Digital Photo Frame allows you to play MP4, HD 720p, H.264 (+AAC) Videos.
For expert advice on video conversion, you can speak to our support team by visiting
support.nixplay.com
Q: The slideshow sometimes freezes on a certain Photo or Video.
What’s happening?
Occasionally the frame gets stuck on a photo or video. First of all, make sure you are playing
compatible les only. The photo or video might have been edited or saved in a manner which
is not fully compatible with the frame’s processor. You might need to optimize your content
for smooth slideshow playback. For detailed advice on this, please visit support.nixplay.com
Q: How big can Memory Cards be in capacity?
The simple answer is that our frames will accept most High-Capacity Memory Cards like, for
example, a 32GB SDHC Card.
However, please bear in mind that if there are thousands of les on your card and they are in
different folders or formats, this will probably slow the frame’s processor. Also, if the frame
does not appear to be reading a card, it is worth checking ‘properties’ and ensuring that
‘FAT/FAT32’ is selected.
Troubleshooting
4
Q: Why are some of my Photos the wrong way round?
Some photos are not appearing in the correct orientation. The usual reason for this is that
the original les as taken on the camera are this way inclined. Check them on the capturing
device again to see if this is the case. If they were rotated on something like Windows
Explorer, they will not have actually saved in the new orientation for the Digital Photo Frame
to recognise this.
P.14
It simply is not possible to t a vertically oriented image into an entire horizontal screen or t
a horizontally oriented image into the entire vertical screen. This would distort the image.
Q: Why is my Remote Control not working properly?
If the Remote Control is new, rstly make sure you have removed the plastic tab from
between the battery and the tray. Now make sure you are pointing the Remote Control
towards the Remote Sensor and you are pressing the buttons slowly. If you suspect the
battery is at, you will need to replace it with a CR2025 lithium button-cell battery. If you
suspect the Remote Control is not working at all, please email us and we will send you a new
one.
Please refer to our FAQs on our website at support.nixplay.com.
If you have any questions or feedback in regards to our product and service, reach us by going
to our support page on our website. Our support team is committed to delivering exceptional
service and will answer your questions and queries promptly to solve your problems.
For further questions...
Q: If I rotate a Photo or Video, why are there black bars on either side
of the image?
P.15
NIX & Nixplay photo frames are products designed and manufactured by Creedon Technologies USA, LLC here after designated by “The
Company”
The Company warrants the product hardware components (‘Product’) against defects in material and workmanship when used in accordance
with The Company’s documentation (‘Documentation’) for a period of one (1) YEAR after the date of original purchase (‘Warranty Period’)
from the Company or the Company’s authorized reseller. If a hardware defect arises and a valid claim is received within the Warranty Period,
at its option and to the extent permitted by law, Company will either (1) repair the hardware defect at no charge, using new or refurbished
replacement parts, (2) exchange the product with a new or manufactured from new or serviceable used parts and is at least functionally
equivalent to the original product or (3) refund the purchase price of the product.
When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes company’s property.
Parts provided by company in fulllment of its warranty obligation must be used in products for which warranty service is claimed. When a
refund is given, the product for which the refund is provided must be returned and becomes company’s property.
We only cover warranty for purchases made within the USA, Canada, UK or *EU Countries*.
If you purchase from any of these countries but use the frame in a different country, and require warranty service, you will be responsible for
the shipping costs back to the country where the item was originally purchased. We will also be unable to ship a replacement or repaired item
to any country outside of the USA, Canada, UK or *EU Countries*, where it was rst purchased.
EXCLUSIONS AND LIMITATIONS
The Company will have no warranty obligation with respect to the following circumstances (‘Exclusions’) (‘Ineligible Products’): (i) a Product
that has no defects in materials or workmanship, (ii) Products with defects that are not reproducible by The Company, (iii) Products marked
as ‘sample’ or sold ‘AS IS’, (iv) Products whose serial number has been defaced or removed, or (v) Products that have been subject to: (a)
any modications, alterations, repair, or servicing by any party other than The Company or The Company’s authorized representatives; (b)
handling, storage, installation, testing, or use not in accordance with the applicable Documentation; (c) abuse, negligence, neglect, accidents,
abuse or misuse; (d) any breakdowns, uctuations, or interruptions in electric power or the telecommunications network; or (e) any Acts of
God, including re, ood, tornado, earthquake, hurricane, excessive snow, lightning, riot, insurrection, act of war or other disaster.
Ventilation policy:
The slots and openings on the frame are provided for necessary ventilation. To ensure reliable operation and to protect it from overheating,
these slots and openings must never be blocked or covered. As a general guideline, the rear of the frame should be 2-6 inches from the wall
and the sides of the frame should have about 4 inches of ventilation space. If the frame is to be Wall-Mounted, please leave a gap between
the speaker area and the wall, ensuring the room is adequately ventilated and air-conditioned.
WARNING: There is a risk of hardware damage. Never place the Digital Photo Frame in a conned space, such as a bookcase or built-in
cabinet, unless proper ventilation is provided. Failure to do this, and subsequent damage to the frame will void your warranty.
OBTAINING WARRANTY SERVICE
Please access and review the online help resources referred to in the documentation accompanying this hardware product before requesting
warranty service. If the product is still not functioning properly after making use of these resources, please contact our representatives at
support@nixplay.com.
You must contact the Customer Care Department to receive an RMA (Return Merchandise Authorization). Returned NIX / Nixplay products
should be sent, by the buyer, with the postage-prepaid (provided by NIX during the RMA process) and packaged appropriately for safe
shipment.
No replacements will be sent out by the manufacturer until the returned item is received.
Full One Year Manufacturer’s Warranty
One Year Warranty
5
P.16
Notes of Importance6.1
Never remove a Memory Card or USB Flash Drive from a Digital Photo Frame
whilst any media is playing or being deleted.
Never remove a Memory Card or USB Flash Drive from your personal computer
without rst correctly ejecting it. When you see the device you want to remove,
right-click on it and click on ‘Eject’ or ‘Safely Remove Hardware’, then follow
instructions.
Always keep a back up of your photos!
Your warranty does not cover damage caused by incorrect use of memory devices
Important Safety Information6.2
Always follow the basic safety precautions when using your NIX Digital Frame. This will
reduce the risk of re, electric shock, product damage and personal injury.
Do not block ventilation openings. Slots and openings on the Digital Frame are
provided for ventilation. The openings should never be blocked by placing your
Digital Frame on a cushion, sofa or other similar surface.
Keep the Digital Frame away from direct sunlight and heat sources such as
radiators or stoves.
Never place heavy or sharp objects on the LCD panel or Digital Frame.
Do not place the Digital Frame on an unstable cart, stand, tripod, bracket or table.
Only use the AC adapter included with the Digital Frame. Using any other adapter
will void your warranty.
Protect the power cord from being walked on or pinched particularly at plugs,
receptacles and the point where the cord attaches to the Digital Frame.
Safety & Compliance
6
P.17
WARNING:
To reduce the risk of electric shock, do not remove the cover or back of the unit.
There are no user-serviceable parts inside. Please refer servicing to qualied
personnel.
To prevent re or electric shock hazard, do not expose the Digital Frame to rain,
moisture or water (dripping or splashing).
Objects lled with liquids, such as vases, should not be placed near the Digital
Frame.
Adaptor Information6.3
Compliance Information6.4
The power adaptor is specically designed for this Digital Frame. Use of an alternative
model might cause problems for Frames with re-chargeable batteries, and standard
Frames.
In case of loss and/or failure of the adaptor, please contact our customer support team via
support.nixplay.com with the following information:
Frame Model Number
Place of Purchase
Date of Purchase
Your Mailing Address
Do not attempt to x the adaptor yourself or replace the unit with anything other than
an authorized NIX power adaptor. We will provide a replacement adaptor, FREE OF
CHARGE.
Waste Electrical and Electronic Equipment Directive (Applicable to Europe):
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. There are separate collection
systems for recycling in your country. For more information about recycling
of this product, please contact the local authority or the retailer where you
purchased the product.
P.18
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause
undesired operation.Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
USB port only supports USB memory devices. It cannot be used for charging or other purposes.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
WARNING:
FCC Compliance 6.4.1
P.19
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions:
this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired
operation of the device.
1
2
l’appareil ne doit pas produire de brouillage, et
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en \ compromettre le fonctionnement.
This Class【B】 digital apparatus complies with Canadian ICES-003. Cet appareil numérique de
la classe B est conforme à la norme NMB-003 du Canada.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
WARNING:
IC Compliance 6.4.2
©2015 Creedon Technologies. All rights reserved.
nix and nixplay are registered trademarks of Creedon Technologies USA.
All trademarks and design copyrights are held exclusively by
Creedon Technologies USA LLC, Minnesota, USA.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

NIX Advance X15D User manual

Brand
NIX
Model
Advance X15D
Category
Digital photo frames
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents