JUNG LS5178TSM is a 2-gang room temperature controller module that can be used for single-room temperature control in KNX installations. It can also be used to operate loads such as light on/off, dimming, Venetian blinds up/down, recalling and saving light scenes, etc. The device has four buttons that can be assigned with push-button sensor functions or functions for controller operation. It also has an illuminable inscription panel and two red status LEDs per button.
JUNG LS5178TSM is a 2-gang room temperature controller module that can be used for single-room temperature control in KNX installations. It can also be used to operate loads such as light on/off, dimming, Venetian blinds up/down, recalling and saving light scenes, etc. The device has four buttons that can be assigned with push-button sensor functions or functions for controller operation. It also has an illuminable inscription panel and two red status LEDs per button.
JUNG LS5178TSM is a 2-gang room temperature controller module that can be used for single-room temperature control in KNX installations. It can also be used to operate loads such as light on/off, dimming, Venetian blinds up/down, recalling and saving light scenes, etc. The device has four buttons that can be assigned with push-button sensor functions or functions for controller operation. It also has an illuminable inscription panel and two red status LEDs per button.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI