Dear Valued Customer
(JUST WANTED YOU TO KNOW)
WE REALLY
APPRECIATE
YOUR PURCHASE
~thank you~
Features
• Supports IEEE 802.3az-2010
• Integrated 1000Mbps SX/LX transceiver
• Supports CDC-ECM
• Supports LPM (Link Power Management)
• Supports pair swap/polarity/skew correction
• Supports power down/link down power saving
• Supports hardware CRC
(Cyclic Redundancy Check) function
• SuperSpeed USB 3.0 ensures high performance
packet transfer rate
• Features full duplex with ow control and
half duplex with back pressure operation
System Requirements
1. An available USB 3.0 type-A port
2. Windows® 10 / 8.1 / 7 (32-/64-bit)
3. Windows® Server 2019 to 2008 R2 (32-/64-bit)
4. Mac OS X® 10.15 to 10.6
USB 3.0 to SFP Gigabit
Ethernet Adapter
Quick Start Guide
04-1257A
P/N: JU-NE0B11-S1
Nov, 2019 Copyright © 2019 by SIIG, Inc. All rights reserved.
Support
For more info or tech support
http://www.siig.com/support
Driver Installation
1. Please download driver from product
page of SIIG website.
2. Click “Setup.exe” to install the driver
3. Follow the Installation steps to complete
the driver Installation
If your system has the built-in driver can use directly.
driver install is not necessary.
Package contents
• USB 3.0 to SFP Gigabit Ethernet Adapte
• Quick Start Guide
/