User Manual
ADVENTURER RETRO WINDSOR
Thank you
for purchasing a SodaKING Home Soda Maker.
To compliment your home soda maker, we have a
complete range of accessories and avours to suit.
Please take a minute to read through the instruction
manual before use to ensure you get the most from your
SodaKING Soda Maker.
IMPORTANT INFORMATION
• Only rinse bottles in warm soapy water
• Do not wash bottles in dishwasher
• Carbonate only drinking water
• For best results use chilled water
• Never Carbonate empty bottles
• Dispose of damaged or expired bottles
• Use only bottles designed for carbonating
• Store your SodaKING cylinder in a cool place
• Use only soapy water to clean your soda maker
• Always follow the instruction to avoid possible injury
Replacement C02 Cylinders
When empty please return your carbonating cylinder to
an authorised stockist to exchange for a full SodaKING
carbonating cylinder for the price of the gas rell only.
For convenience, you can also purchase spare cylinders
from your stockist.
Visit www.sodaking.com.au for your nearest cylinder
exchange location.
Any unauthorised relling of SodaKING carbonating
cylinders by third parties voids all warranties. To ensure
your safety only use refilled cylinders bearing the
SodaKING cover and safety seal.
1
Depress and hold the
top front panel while
unscrewing the
bottle from the soda
maker. Fill the bottle
with tap water to the
indicator line and
place in the fridge to
chill.
2
Depress the two
buttons on either side
of the rear cover and
pull the cover away
from the soda maker.
Pull down on the small
white transit plug and
discard.
3
Remove the seal from
the top of the CO2
Cylinder and slide it up
through the base of
the soda maker and
gently screw it up into
the thread at the top.
Ensure its all the way
in.
4
Replace the rear cover.
Now push and hold the
front panel so the CO2
injector is pointing
forward and screw your
chilled bottle in until it
is nice and tight. Now
release the top front
panel.
5
Push the bottle gently
forward until it is in its
upright position. Push
the top button down
rmly for a second or
two 3 or 4 times until
you hear a loud
buzzing sound. More
buzzes more bubbles!
6
Finally push the front
panel in while pulling
the base of the bottle
forward. You will hear
the remaining co2
escape from the bottle.
You are now ready to
add your avour or just
enjoy straight!
RETRO
Setup Instructions
1
Depress and hold the
top front panel while
unscrewing the
bottle from the soda
maker. Fill the bottle
with tap water to the
indicator line and
place in the fridge to
chill.
2
Depress the two
buttons on either side
of the rear cover and
pull the cover away
from the soda maker.
Pull down on the small
white transit plug and
discard.
3
Remove the seal from
the top of the CO2
Cylinder and slide it up
through the base of
the soda maker and
gently screw it up into
the thread at the top.
Ensure its all the way
in.
4
Replace the rear cover.
Now push and hold the
front panel so the CO2
injector is pointing
forward and screw your
chilled bottle in until it
is nice and tight. Now
release the top front
panel.
5
Push the bottle gently
forward until it is in its
upright position. Push
the top button down
rmly for a second or
two 3 or 4 times until
you hear a loud
buzzing sound. More
buzzes more bubbles!
6
Finally push the front
panel in while pulling
the base of the bottle
forward. You will hear
the remaining co2
escape from the bottle.
You are now ready to
add your avour or just
enjoy straight!
ADVENTURER
Setup Instructions
1
Pull the base of the
bottle forward and
unscrew to remove
from the soda
maker. Fill the bottle
with tap water to the
indicator line and
place in the fridge to
chill.
2
Depress the top button
at the rear and pull the
cover away from the
soda maker. Pull down
on the small white
transit plug and
discard.
3
Remove the seal from
the top of the CO2
Cylinder and slide it up
through the base of the
soda maker and gently
screw it up into the
thread at the top.
Ensure it is all the way
in.
4
Replace the rear cover
so it locks onto the
soda maker. With the
CO2 injector pointing
forward, screw your
chilled bottle in until
it’s nice and tight.
5
Push the bottle gently
forward until it is in its
upright position. Push
the top button down
rmly for a second or
two 3 or 4 times until
you hear a loud
buzzing sound. More
buzzes more bubbles!
6
Finally gently pull the
bottom of the bottle
forward. You will hear
the remaining co2
escape from the bottle.
Unscrew the bottle and
you are now ready to
add your avour or just
enjoy straight!
WINDSOR
Setup Instructions
Warranty
SodaKING Australia warrants your new product to be free from
defects in manufacturing, materials and workmanship for a
period of 24 Months from the date of purchase. This warranty is
in addition to your rights under the Australia Consumer Law. You
are entitled to have the goods repaired or replaced if the goods
fail to be o acceptable quality and the failure does not amount
to a major failure.
SodaKING will provide you with a repair or replacement should
your product become defective within the warranty period.
Please retain your receipt as proof of purchase and contact our
Customer Service Team on 1300 GET SODA or 03 90817600
SodaKING Cylinders
To protect the consumer, various regulatory bodies have setup
guidelines for the use, lling, maintenance and repair of C02
carbonator cylinders. SodaKING Australia Pty Ltd and its associated
manufacturers have the required credentials to facilitate the safe
production and transportation of its c02 cylinders in accordance
with Australian health and safety requirements. This can only be
guaranteed if the SodaKING cylinders are maintained, examined,
retested and relled by SodaKING Australia Lty Ltd.
All SodaKING carbonating cylinders have a built in safety
mechanism. Should the cylinder be exposed to excessive heat the
safety mechanism will release the internal pressure, this process
will cause the cylinder to become extremely cold. Refrain from
touching the cylinder until it has returned to room temperature.
Each SodaKING cylinders is provided under license.
SodaKING Australia Pty Ltd
Unit 4 745 Springvale Road
Mulgrave Victoria 3170 Australia
Phone 1300 GETSODA
-
1
-
2
-
3
-
4
-
5
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
SodaStream 1011711613 User manual
-
KitchenAid 5KSS1121 Instructions For Use Manual
-
Cuisinart SMS-201 User manual
-
-
-
-
SodaStream Genesis User manual
-
-
DrinkMate 420-02-3z User guide
-
SodaStream SOURCE User manual
