Evolveo salvarix remote controller 1 User manual

Evolveo
Brand
Evolveo
Model
salvarix remote controller 1
Type
User manual

Evolveo salvarix remote controller 1 is a wireless device that allows you to control your alarm system from a distance of up to 80 meters in open space. It features four buttons, each with a specific function:

  • Alarm activation: Press this button to activate the alarm system.
  • Partial activation: Press this button to activate the alarm system in partial mode, also known as "Home mode".
  • Alarm deactivation: Press this button to deactivate the alarm system.
  • SOS: Press this button to trigger an SOS alarm, which will notify other users via SMS or call.

Evolveo salvarix remote controller 1 is a wireless device that allows you to control your alarm system from a distance of up to 80 meters in open space. It features four buttons, each with a specific function:

  • Alarm activation: Press this button to activate the alarm system.
  • Partial activation: Press this button to activate the alarm system in partial mode, also known as "Home mode".
  • Alarm deactivation: Press this button to deactivate the alarm system.
  • SOS: Press this button to trigger an SOS alarm, which will notify other users via SMS or call.
Salvarix
remote controller, key case
www.evolveo.com
The wireless remote controller is used for quick remote alarm control. With the 4 buttons you can
activate / deactivate / partially encode the alarm or trigger an SOS alarm. Practical ring allows
comfortable use.
Technical specification:
Power supply: 1 × 3V (CR2032) battery included
Consumption when activated: 7.5 mA
Standby consumption: 0 mA
Range: up to 80 m in open space
Frequency: 433 Mhz
Max. humidity: 90 % without condensation
Working temperature: -20 °C to +50 °C
Note: to guarantee long battery life, do not use in extremely low and high temperatures for long
periods of time. Do not expose to direct sunlight.
Device and control description:
Partial activation
Press to switch the alarm to Partial
activation mode (Home mode)
Cover screw
Ring
Alarm deactivation
Press to switch the alarm to
Deactivated mode
SOS
By pressing the alarm triggers an SOS
alarm and informs other users by
SMS/Call.
Alarm activation
Press to switch the alarm to
Activated mode
Battery replacement
Unscrew the screw on the back and carefully remove the front and rear key case covers. Remove
the discharged batteries and insert new ones. Maintain correct polarity to avoid damage to the
key case.
Pairing with the control panel
For successful pairing with the control panel, follow the control panel manual.
Disposal
The symbol of crossed out container on the product, in the literature or on the packaging means
that in the European Union all the electric and electronic equipment, batteries and accumulators
must be placed in separate waste after the end of their service life. Do not throw these products
into the unsorted municipal waste.
DECLARATION OF CONFORMITY
Hereby, the company Abacus Electric, s.r.o. declares that EVOLVEO Salvarix, remote controller, key
case is in compliance with the requirements of the standards and regulations, relevant for the
given type of device.
Find the complete text of Declaration of conformity at ftp://ftp.evolveo.com/ce
Dovozce / Dovozca / Importer / Importőr
Abacus Electric, s.r.o.
Planá 2, 370 01, Czech Republic
Výrobce / Výrobca / Manufacturer / Gyártó
Naxya Limited
No. 5, 17/F Bonham Trade Centre, 50 Bonham Strand, Sheung Wan, Hong Kong
Made in China
Copyright © Abacus Electric, s.r.o.
www.evolveo.com
www.facebook.com/EvolveoCZ
All rights reserved. Design and specification may be changed without prior notice.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Evolveo salvarix remote controller 1 User manual

Evolveo
Brand
Evolveo
Model
salvarix remote controller 1
Type
User manual

Evolveo salvarix remote controller 1 is a wireless device that allows you to control your alarm system from a distance of up to 80 meters in open space. It features four buttons, each with a specific function:

  • Alarm activation: Press this button to activate the alarm system.
  • Partial activation: Press this button to activate the alarm system in partial mode, also known as "Home mode".
  • Alarm deactivation: Press this button to deactivate the alarm system.
  • SOS: Press this button to trigger an SOS alarm, which will notify other users via SMS or call.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents