Datamax O'Neil DPR24-2671-01 Datasheet

Category
Printer/scanner spare parts
Type
Datasheet

This manual is also suitable for

Datamax O'Neil DPR24-2671-01 is a media sensor used to detect the presence or absence of media in a printer. This is a crucial component of any printer as it ensures that the printer does not attempt to print on an empty platen, which could damage the printer or the printhead. In addition, the media sensor can be used to control the flow of media through the printer, ensuring that the media is properly aligned and fed into the printhead. This can help to prevent jams and misprints, resulting in increased productivity and efficiency.

Datamax O'Neil DPR24-2671-01 is a media sensor used to detect the presence or absence of media in a printer. This is a crucial component of any printer as it ensures that the printer does not attempt to print on an empty platen, which could damage the printer or the printhead. In addition, the media sensor can be used to control the flow of media through the printer, ensuring that the media is properly aligned and fed into the printhead. This can help to prevent jams and misprints, resulting in increased productivity and efficiency.

Replacement Parts Catalo
g
S-Class Parts Catalog Replacement Parts
i
Contents
Printer Assemblies ......................................................................1
ST Model Cover Assembly.................................................................................... 2
SV Model Cover Assembly.................................................................................... 3
Printer Assembly 1 of 2 ....................................................................................... 4
Printer Assembly 2 of 2 ....................................................................................... 5
Printhead Assembly ............................................................................................ 8
Hardware and Small Parts.................................................................................... 9
S-Class Options ........................................................................ 11
Cutter Option....................................................................................................12
S-Class Parts Catalog Replacement Parts
ii
Using this Manual
Before using this manual it is important to identify the model
printer you are locating parts for. Many parts are used across
all models, yet some are specific to certain models. The model
of printer is located on the serial label on the rear of the
printer.
This manual covers the following S-Class models:
ST-3210/3306 & SV-3210/3306
Serial Label
For more information on ordering or becoming a DASC partner please contact:
Datamax-O’Neil Customer Care
407-523-5550
Revision Listing
Date Rev. Changes
2/20/09 A Initial Release
6/1/09 B Cover Update
12/1/12 C Cutter option callouts corrected
92-2520-01 Rev.C
S-Class Parts Catalog Replacement Parts
1
S-Class
Printer Assemblies
S-Class Parts Catalog Replacement Parts
2
ST Model Cover Assembly
4
6
1
2
3
5
# Part# Description Notes
1
DPO15-2846-01 Cover Assembly, Media
2
DPR15-3169-01 Cover, Electronics
3
DPO78-2446-01 Lock Set, Keyed Different – without Master Key
4
DPO78-2446-02 Lock Set, Keyed Alike
5
DPO78-2446-03 Lock Set, Keyed Different – with Master Key
6
DPO140073 (10PK) Rubber Foot
S-Class Parts Catalog Replacement Parts
3
SV Model Cover Assembly
1
2
3
4
# Part# Description Notes
DPR15-2870-01 Assy, Front Plate – Cutter
1
DPR15-2870-02 Assy, Front Plate – Tear Off
2
DPO11-5364-01 Plate, Side
3
DPR11-5368-01 Cover
4
DPO140073 (10PK) Rubber Foot
S-Class Parts Catalog Replacement Parts
4
ST Model - Printer Assembly 1 of 2
4
6
7
8
9
1
2
3
5
# Part# Description Notes
DPR24-2672-01 Assy, Stepper Motor – 203 DPI
1
DPR24-2673-01 Assy, Stepper Motor – 300 DPI
2
DPR12-2863-01 (3PK) Spacer Shaft
3
ROL78-2787-01 Kit, Platen
4
DPR17-2582-01 (10PK) Outer Washers -Printhead Assembly
5
DPR78-2788-01 Printhead Mount Assembly
Does not include printhead
6
DPR17-2671-01 (10PK) Inner Washer -Printhead Assembly
7
DPR24-2671-01 Assy, Media Sensor
Bottom Sensor Models Only
8
DPR15-2789-01 Assy, Media Guide – Bottom Sensor
9
DPR24-2625-02 Assy, Media Guide – Top Sensor
Includes Media Sensor
S-Class Parts Catalog Replacement Parts
5
ST Model - Printer Assembly 2 of 2
4
67
1
2
3
5
# Part# Description Notes
1
DPR78-2789-01 Kit, Front Panel
DPR51-2355-02 CCA,Main Board,(2MB Flash)
2
DPR51-2355-12 CCA,Main Board,(6MB Flash)
3
DPR51-2357-00 Power Supply
4
DPR51-2425-00 CCA, Transition Board
5
DPR78-2790-01 Kit, Tensioner
6
DPR78-2791-01 Kit, Idler Pulley
300 DPI Printers Only
DPR78-2792-01 Kit, Belt/Drive Pulley – 203 DPI
ST Printers Only
7
DPR78-2793-01 Kit, Belt/Drive Pulley – 300 DPI
ST Printers Only
S-Class Parts Catalog Replacement Parts
6
SV Model - Printer Assembly 1 of 2
4
6
7
8
9
3
5
1
2
# Part# Description Notes
DPR24-2672-01 Assy, Stepper Motor – 203 DPI
1
DPR24-2673-01 Assy, Stepper Motor – 300 DPI
2
DPR12-2863-01 (3PK) Spacer Shaft
3
ROL78-2787-01 Kit, Platen
4
DPR17-2582-01 (10PK) Outer Washers -Printhead Assembly
5
DPR78-2788-01 Printhead Mount Assembly
Does not include printhead
6
DPR17-2671-01 (10PK) Inner Washer -Printhead Assembly
7
DPR24-2671-01 Assy, Media Sensor
Bottom Sensor Models Only
8
DPR15-2789-01 Assy, Media Guide – Bottom Sensor
9
DPR24-2625-02 Assy, Media Guide – Top Sensor
Includes Media Sensor
S-Class Parts Catalog Replacement Parts
7
SV Model - Printer Assembly 2 of 2
4
6
7
1
2
3
5
# Part# Description Notes
1
DPR78-2789-01 Kit, Front Panel
DPR51-2355-02 CCA,Main Board,(2MB Flash)
2
DPR51-2355-12 CCA,Main Board,(6MB Flash)
3
DPR51-2357-00 Power Supply
4
DPR51-2425-00 CCA, Transition Board
5
DPR78-2790-01 Kit, Tensioner
6
DPR78-2791-01 Kit, Idler Pulley
300 DPI Printers Only
DPR78-2794-01 Kit, Belt/Drive Pulley – 203 DPI
SV Printers Only
7
DPR78-2795-01 Kit, Belt/Drive Pulley – 300 DPI
SV Printers Only
S-Class Parts Catalog Replacement Parts
8
Printhead Assembly
1
2
3
4
# Part# Description Notes
1
DPR17-2898-01 (2PK) Printhead Pressure Springs
PHD20-2177-01 Printhead – 203 DPI
2
PHD20-2178-01 Printhead – 300 DPI
3
DPR32-2622-02 Cable, Printhead, Power
4
DPR32-2621-02 Cable, Printhead, Data
S-Class Parts Catalog Replacement Parts
9
Hardware and Small Parts 1 of 2
1
2
3
4
5
6
7
8
9
10
13
15
11
12
14
# Part# Description Notes
1
DPO130809 (50PK) Screw, 4-40x¼, PHD
2
DPO130938 (50PK) Screw, M3x.5x6, PHD
3
DPO130939 (25PK) Screw, M3x.5x10, PHD
4
DPO130942 (50PK) Screw, M4x10 PHD
5
DPO130940 (50PK) Screw, M4x6 PHD
6
DPO10-2514-05 (50PK) Screw, M3x14, FHD
7
DPO10-2514-06 (50PK) Screw, M3x16, FHD
8
DPO10-2519-02 (50PK) Screw, M3x8, PHD
9
DPO10-2733-01 (20PK) Screw, M2X10, PHD
10
DPO10-2743-01 (50PK) Screw, M3x4, PHD
11
DPO10-2813-01 (50PK) Screw, M4x8, PHD
12
DPO10-2830-01 (25PK) Screw, M3x6, Black, PHD
13
DPO10-2902-01 (25PK) Screw, M4x16, PHD
14
DPO10-2903-02 (50PK) Screw, M4x8, PHD
15
DPO17-2858-01 (2PK) Thumbscrew, Knurled, M4 X10
S-Class Parts Catalog Replacement Parts
10
Hardware and Small Parts 2 of 2
16
17
18
19
20
21
22
24
25
26
23
# Part# Description Notes
16
DPO130944 (50PK) Nut, M3 X .5
17
DPO140028 (50PK) Nut, 4-40
18
DPO10-2114-01 (50PK) Nut, M4
19
DPO10-2905-01 (50PK) Nut, Self Locking
20
DPO10-2901-01 (50PK) Washer, 4.3mm ID, Flat
21
DPO10-0001-01 (50PK) Washer, #6, Flat
22
DPO10-2518-01 (50PK) Washer, #4, Flat, SS
23
DPO10-0501-01 (50PK) Retaining Ring, 1/4
24
DPO10-2750-01 (50PK) Retaining Ring, Push-On .25DIA
25
DPO10-2899-01 (50PK) Retaining Ring, Bowed
26
DPO17-0120-01 (50PK) Bearing, Flanged
S-Class Parts Catalog Options
11
S-Class
Options
S-Class Parts Catalog Options
12
Cutter Option
1
2
3
# Part# Description Notes
1
OPT15-2869-01 Cutter Option – SV Printers
2
OPT15-2775-01 Cutter Option – ST Printers
3
DPR20-2180-01 Switch, Sub-miniature
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Datamax O'Neil DPR24-2671-01 Datasheet

Category
Printer/scanner spare parts
Type
Datasheet
This manual is also suitable for

Datamax O'Neil DPR24-2671-01 is a media sensor used to detect the presence or absence of media in a printer. This is a crucial component of any printer as it ensures that the printer does not attempt to print on an empty platen, which could damage the printer or the printhead. In addition, the media sensor can be used to control the flow of media through the printer, ensuring that the media is properly aligned and fed into the printhead. This can help to prevent jams and misprints, resulting in increased productivity and efficiency.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI