ABS Printer Inlay for Canon iP100
Perfect printer fastening for DataConcept and DataConcept
Trolley
The printer fastening ABS Printer Inlay, which was specially
designed for the case solutions DataConcept and
DataConcept Trolley, provides the printer with a safe stand
during transport or on the job thanks to its high-class material
(ABS synthetics) as well as its stable form. Thanks to its high
functionality ABS Printer Inlay supports the flexible usage on
the go. The printer fastening is attached by means of a Velcro
band in the designated printer compartment of the
DataConcept or DataConcept Trolley. This ensures that the
printer has a fixed position, thus protection it from possible
damage during transport. Additionally, the sophisticated
construction simplifies the installation and removal of the
printer. Furthermore, ABS Printer Inlay features a mounted
cable box with detachable lid in which the USB printer cable
and the power supply unit can be tucked away and which
helps save room. A USB printer cable is included in the scope
of supply of ABS Printer Inlay.
Art. Nr.: Z21278Z (black)
Material: ABS synthetics
Weight: 0.6 kg / 1.32 lbs
Dimensions: 400 x 330 x 85 mm / 15.7 x 13 x 3.3 inch
DICOTA UK Ltd.
DICOTA House, Eastheath Avenue, Wokingham
RG41 2PR Berkshire
Phone: +44 - 870 - 382 1000
FAX: +44 - 870 - 382 1000
www.dicota.co.uk
/
