19713
iPad mini stand holder
Product variant
19713-300-55 - black 3/8"
Data
Bearing plate 208.7 x 143.7 mm
Material plastic
Max. load capacity 0.75 kg
Special features to be screwed on to 3/8" threaded bolts;
iPad mini is easily clipped into the holder;
lightning connector and headphone jack are
accessible;
freely rotates 90°;
suitable for iPad mini or iPad mini with Retina
display
Suitable for 3/8" thread
Swivel 90 º
Type black 3/8"
Weight 0.29 kg
A clever way to show off your iPad mini. The mount is guaranteed to hold the iPad mini effectively and safely. For use on stage,
in the rehearsal room or at home - the 3/8" internal thread means the holder can be attached to any microphone stand easily and
quickly. The iPad mini is clipped in and out of the holder effortlessly. An easy-to-use wing nut adjusts the tilt so the user can
easily find a position to suit them. The iPad mini switches rapidly between the vertical and horizontal format without slipping.
/