Da-Lite 99462 Datasheet

Category
Projector accessories
Type
Datasheet

This manual is also suitable for

Da-Lite 99462 is a lace and grommet frame designed for use with flexible lace and grommet screen surfaces. It is constructed of 3" diameter aluminum tubing with radius frame corners and powder coated black. The frame can be suspended from the ceiling or wall mounted. It includes a 7" wide masking cover to conceal the lace cord and hooks, and Pro-Trim® to enhance the appearance and absorb light surrounding the viewing area. The frame is designed for use with screen surfaces up to 16' high and 88'10" wide for front projection, and 38'10" wide for rear projection.

Da-Lite 99462 is a lace and grommet frame designed for use with flexible lace and grommet screen surfaces. It is constructed of 3" diameter aluminum tubing with radius frame corners and powder coated black. The frame can be suspended from the ceiling or wall mounted. It includes a 7" wide masking cover to conceal the lace cord and hooks, and Pro-Trim® to enhance the appearance and absorb light surrounding the viewing area. The frame is designed for use with screen surfaces up to 16' high and 88'10" wide for front projection, and 38'10" wide for rear projection.

SUGGESTED SPECIFICATIONS: projection screen(s), (H) x (W), constructed of
3" diameter aluminum tubing with radius frame corners. Frame sections to be slip fit at corners. Lacing cord to be woven onto frame
sections with preinstalled S-hooks for viewing surface attachment. Frame to be powder coated black with optional 7" wide masking
cover to conceal lace cord and hooks. Optional masking cover includes Pro-Trim
®
to enhance appearance and absorb light surrounding
the viewing area. Frame can be suspended from ceiling by means of included eyebolts installed on top frame section. Wall mount
brackets and eye bolts included for wall or ceiling installation.
The Series 300 lace and grommet frame is designed for use with flexible lace and grommet screen surfaces (sold separately).
All Da-Mat
®
Foldable Black Backed, High Contrast Da-Mat
®
, Cinema Vision, High Contrast Cinema Vision, Pearlescent, Da-Tex
®
, High
Contrast Da-Tex
®
, Ultra Wide Angle (Rear), and Dual Vision surfaces are seamless up to 16' high.
High Contrast Cinema Perf, Audio Vision and High Contrast Audio Vision surfaces are available in sizes up to 8' high.
Screen frames with an outside dimension greater than 20'8" will have two-piece top and bottom or side frame sections.
Maximum frame outside dimension (height or width) is 90' for front projection and 40' for rear projection.
Maximum screen viewing area (height or width) is 88'10" for front projection and 38'10" for rear projection.
WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
Designed for use with the following lace and grommet screen surfaces:
Da-Mat
®
Foldable Black Backed
High Contrast Da-Mat
®
Cinema Vision
High Contrast Cinema Vision
High Contrast Cinema Perf
Pearlescent
Da-Tex
®
(Rear)
High Contrast Da-Tex
®
(Rear)
Ultra Wide Angle (Rear)
Dual Vision
Audio Vision
High Contrast Audio Vision
Options:
Pro-Trim
®
Masking Cover
Pro-Trim
®
is a fabric covering that aesthetically enhances the appearance of the installation. The Pro-Trim
®
masking cover conceals
screen binding and lacing cord.
Series 300 Lace and Grommet Frame with Single Axis curve. Pro-Trim
®
Masking Cover not available on single Axis curve.
Project:
Architect:
Phone:
Contractor:
Phone:
Supervisor:
Phone:
Date:
Revised:
Specifications subject to change without notice.
Overall frame dimensions ±
1
/
4
".
SPECIFICATION DATA
SERIES 300 LACE AND
GROMMET FRAME
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
SERIES 300 LACE AND GROMMET FRAME
FRAME SHOWN ASSEMBLED WITH PRO-TRIM
®
MASKING COVER
Rev. 2/08
VIEWING WIDTH +14"
7"
VIEWING
HEIGHT +14"
7"
3
1
/
4
"
FRAME SHOWN ASSEMBLED WITH VIEWING SURFACE (SOLD SEPARATELY)
VIEWING
WIDTH +14"*
VIEWING
HEIGHT +14"*
3"
*WHEN USING STANDARD 2" BINDING ON SCREEN SURFACE.
  • Page 1 1
  • Page 2 2

Da-Lite 99462 Datasheet

Category
Projector accessories
Type
Datasheet
This manual is also suitable for

Da-Lite 99462 is a lace and grommet frame designed for use with flexible lace and grommet screen surfaces. It is constructed of 3" diameter aluminum tubing with radius frame corners and powder coated black. The frame can be suspended from the ceiling or wall mounted. It includes a 7" wide masking cover to conceal the lace cord and hooks, and Pro-Trim® to enhance the appearance and absorb light surrounding the viewing area. The frame is designed for use with screen surfaces up to 16' high and 88'10" wide for front projection, and 38'10" wide for rear projection.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI