SEI DN099000TX Assembly Instructions Manual
- Type
- Assembly Instructions Manual
SEI DN099000TX is a dining table with a modern and stylish design, perfect for any dining room or kitchen.
Key features:
- Sturdy construction: Made from high-quality materials, this table is built to last.
- Versatile design: With its clean lines and simple silhouette, this table can be paired with a variety of chairs and décor styles.
- Easy to assemble: With clear instructions and all necessary hardware included, this table can be assembled in minutes.
Possible use cases:
- Family meals: Gather your family and friends around this table for memorable meals and conversations.
SEI DN099000TX is a dining table with a modern and stylish design, perfect for any dining room or kitchen.
Key features:
- Sturdy construction: Made from high-quality materials, this table is built to last.
- Versatile design: With its clean lines and simple silhouette, this table can be paired with a variety of chairs and décor styles.
- Easy to assemble: With clear instructions and all necessary hardware included, this table can be assembled in minutes.
Possible use cases:
- Family meals: Gather your family and friends around this table for memorable meals and conversations.
DN099000TX
Tahoe Dining Table
Assembly Instructions
For assistance with assembly, contact：
Southern Enterprises Inc.
Customer Service 1-800-633-5096
www.seidal.com
PO#:
Page 1
Tahoe Dining Table
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before
beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the
incorrect hardware will cause damage.
A
Quantity
of 1
top frame
B
Quantity
of 2
left leg
C
Quantity
of 2
right leg
D
Quantity
of 2
top short stretcher
E
Quantity
of 2
lower short stretcher
F
Quantity
of 1
long stretcher
Page 2
1
Quantity
of 1
allen wrench
2
Quantity
of 8
bolt: Dia 5/16” x 1-1/2”L
3 Quantity
of 8
spring washer
4
Quantity
of 8
flat washer
5 Quantity
of 8
long screw: 3/16” x 1-1/2”L
6 Quantity
of 2
small screw: 3/16” x 1-1/4”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096
Page 3
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)
Tahoe Dining Table
Assembly Instructions
Figure 1
Turn top frame (A) upside-down on a
soft working surface and insert the bolts
(2) into the spring washers (3) and flat
washers (4).
Attach the right leg (C) to top frame (A)
with bolts (2) and tighten all bolts (2)
using allen wrench (1). Then, insert one
end of top short stretcher (D) and lower
short stretcher (E) into the hole on right
leg (C).
Attach left leg (B) to top frame using
bolts (2) and insert the other end of
stretchers (D) and (E) into left leg (B).
Fasten bolts (2) with allen wrench (1).
Figure 2
Repeat the steps on figure 1 to
assemble right leg (C) and insert
one end of top short stretcher (D) and
lower short stretcher (E) into right leg
(C). Fasten bolts (2) with allen wrench
(1).
Insert both ends of long middle stretcher
(F) into holes of both lower short
stretchers (D) as shown.
Attach left leg (B) to top frame and
insert the other end of stretchers (D)
and
(E) into left leg (B). Fasten bolts (2) with
allen wrench (1).
Page 4
A
C
D
B
F
E
1
2
3
4
A
B
D
E
C
1
2
3
4
Figure 3
Insert long screws (5) into pre-drilled
holes on stretchers (D) and (E) as
shown. Tighten using screwdriver.
Figure 4
Insert screws (6) into pre-drilled holes
on stretcher (F) as shown. Tighten using
screwdriver.
Page 5
5
5
F
D
D
C
C
B
B
E
E
5
5
6
6
F
D
D
C
C
B
B
E
E
Figure 5
Turn the table over. If the table is not
level, please adjust the levelers on the
end of the legs by hand as shown.
Now your Tahoe dining table is ready to
use.
Page 6
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s).
If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
-
1
-
2
-
3
-
4
-
5
-
6
-
7
SEI DN099000TX Assembly Instructions Manual
- Type
- Assembly Instructions Manual
SEI DN099000TX is a dining table with a modern and stylish design, perfect for any dining room or kitchen.
Key features:
- Sturdy construction: Made from high-quality materials, this table is built to last.
- Versatile design: With its clean lines and simple silhouette, this table can be paired with a variety of chairs and décor styles.
- Easy to assemble: With clear instructions and all necessary hardware included, this table can be assembled in minutes.
Possible use cases:
- Family meals: Gather your family and friends around this table for memorable meals and conversations.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SEI Tilt-Top Drafting Table HO967800TX Assembly Instructions Manual
-
Southern Enterprises HD889221 Operating instructions
-
-
-
-
-
-
-
-
SEI BELMAR CK543200TX Assembly Instructions Manual
Other documents
-
Boston Loft Furnishings ATG2509 User manual
-
Riverside Furniture 21259 Assembly Instructions
-
-
Hooker 5805-85003-96 Assembly Instructions
-
-
-
-
-
-
