Elma Elmasteam 10 Operating Instructions Manual

Brand: Elma

Model: Elmasteam 10

Type: Operating Instructions Manual

This manual is also suitable for

Elma Elmasteam 10 is a high-performance steam cleaner with various features and possible use cases. The device offers steam and compressed air, hot water, and individually selectable/expandable units. Elmasteam 10 has a manometer pressure indication, a simple operation with straightforward controls, and modern safety devices. With the variable steam volume at the outlet, the device can clean items using steam or compressed air (if compressed air connection is available).

Elma GmbH & Co KG Kolpingstr. 1-7 D-78224 Singen Tel. +49 (0) 7731 / 882-0 Fax +49 (0) 7731 / 882-266 info@elma-germany.com

Operating Instructions

High-performance steam jet cleaner

Elmasteam GB 

 english 

www.elma-germany.com

Content

BA/Elmasteam/GB/0306 © Elma GmbH & Co KG

1 General..............................................................................3

2 Important safety warnings .................................................3

3 Product description............................................................4

3.1 Delivered equipment and accessories........................4

3.1.1 Elmasteam 3 / Elmasteam 5 ................................4

3.1.2 Elmasteam 10 ......................................................4

3.1.3 Optional additional equipment..............................5

3.2 CE conformity .............................................................5

3.3 Product features..........................................................6

3.4 Functioning .................................................................6

3.5 Diagram: module variants...........................................7

3.6 Technical details.........................................................8

3.7 Safety devices.............................................................9

3.8 Elements top view.......................................................9

3.9 Elements front view.....................................................9

3.10 Elements back view..................................................11

3.11 Functioning of the fixed nozzle .................................12

3.11.1 Flexible hand piece ............................................13

4 Initial operation................................................................13

4.1 Placement and ambient conditions...........................13

4.2 Mounting of fixed nozzle with foot-activated switch

(option)

......................................................................14

4.3 Mounting flexible hand piece (option).......................15

4.4 Filling of the unit - Filling by hand .............................16

4.5 Automatic filling.........................................................16

4.6 Connection pump “Aquamatic” .................................17

5 Handling during operation...............................................18

5.1 Working with the hand piece.....................................19

5.2 Working with the fixed nozzle ...................................20

6 Cleaning options..............................................................20

6.1 Operation with hot water (Elmasteam 10 only).........20

6.2 Operation with compressed air.................................20

7 Maintenance / care / repair..............................................20

7.1 Monthly maintenance works .....................................21

7.2 Yearly maintenance works........................................22

7.3 Repair .......................................................................23

8 Putting out of action and waste disposal.........................24

9 Manufacturer’s contact address......................................24

General

1 General

The present Operating Instructions are part of the delivered

equipment. They must be ready for use at any time and remain

with the unit in case of resale.

We reserve the right to carry out technical modifications on the

unit due to advanced development.

Reprints, translations and copying of any kind, including of parts

of the document, must be authorized by the editor.

The copyright remains with the editor.

These Operating Instructions are not automatically revised. For

the latest revised issue please contact the manufacturer and

editor of these Operating Instructions.

The manufacturer’s contact address is indicated on the last page

of the Operating Instructions.

2 Important safety warnings

Read carefully before initial operation!

Use the Elmasteam steam jet cleaner according to the Operating

Instructions. In case of improper use the manufacturer cannot be

held responsible for the safety of the operating personnel and the

correct functioning of the unit.

The present steam jet cleaner has been designed for the

cleaning of items only. Do not steam clean living beings!

Intended use

After unpacking check the unit for possible transport damages. In

case of visible damages do not put the unit into operation.

Contact your supplier and forwarding agent.

Check for transport

damages

For safety reasons, the present unit must be connected to a

correctly grounded socket only. The technical details indicated on

the nameplate must correspond with the available mains

connection details, in particular those of the mains voltage and

current connected value.

Mains connection

Place the unit at a dry and sufficiently ventilated workplace. Keep

the unit dry!

Placement

For safety reasons, the steam jet unit must be operated by

authorized and sufficiently instructed personnel only.

Operating personnel

Caution! Hot surfaces

During operation, the unit cover, the steam outlet nozzle and the

drain plug heat up considerably.

Wrong operation may cause a risk of scalding by hot steam!

Caution! Hot steam

Unauthorized third persons must not stay within reach of the

steam jet. Be careful when operating the unit in order to prevent

injuries caused by hot steam.

Product description

BA/Elmasteam/GB/0306 © Elma GmbH & Co KG

Switch the unit into „stand-by“ operating mode during operating

breaks. This prevents unintended activation of the steam outlet.

Do not open screw cap above 1 bar steam pressure.

In order to prevent electrical accidents and damage, do not

steam clean the unit and do not let any liquid enter the unit.

In case of any damage on the unit or if the unit has become wet

pull the mains plug.

The unit must be opened by authorized specialized personnel

only. Pull the mains plug before opening the unit.

Prevention o

electrical accidents

Do not operate the Elmasteam with empty water tank as this

might cause damage to the unit!

Filling

Operate the unit with water only and observe the instructions, in

particular those on the use of the pump (Aquamatic).

No chemical

additions

Carry out the maintenance works at regular intervals as

described in the present Operating Instructions in order to

guarantee the correct functioning of the unit and to keep the

safety standard (see section 7).

Repair must be carried out by authorized specialized personnel

only. Pull the mains plug before opening the unit.

In case of damage or faulty operation please contact your

supplier or the manufacturer of the unit.

Maintenance and

repai

3 Product description

3.1 Delivered equipment and accessories

3.1.1 Elmasteam 3 / Elmasteam 5

• flexible hand piece or fixed nozzle with foot-activated switch

(optional)

• compressed air connection (inlet)

• connection for pump „Aquamatic“

• filling funnel

• pincette

• maintenance tube “M“ for monthly maintenance

• maintenance tube “J “ for yearly maintenance

3.1.2 Elmasteam 10

as Elmasteam 3 and 5, but with 2 outlets and 3 variants:

• 2x flexible hand piece

• 2x fixed nozzle with foot-activated switch or

• 1x flexible hand piece and 1x fixed nozzle

Product description

3.1.3 Optional additional equipment

A B

Illustrations 3.1 / 3.2 / 3.3 / 3.4 Accessories

E F

Pump “Aquamatic"

for the automatic filling of the tank; can be retrofitted at existing

units

Order no.: 376 017 0000

Pincette with plastic tips

for grabbing and holding small items

Order no.: 376 071 0000

Sieve large – for the safe cleaning of small items

Order no.: 376 073 0000

Sieve small – for the safe cleaning of small items

Order no.: 376 072 0000

Collecting tank – for the controlled steam collection

Order no.: 376 070 0000

Transport cart for Elmasteam 5 and 10

Order no.: 376 080 0000.

3.2 CE conformity

The present Elmasteam steam jet cleaner is in compliance with

the CE marking criteria and the following EC directives:

73/23/EEC Low voltage directive

89/336/EEC EMC directive

97/23/EEC pressure units

The declaration of conformity is available from the manufacturer.

Product description

BA/Elmasteam/GB/0306 © Elma GmbH & Co KG

3.3 Product features

• high-performance steam cleaner in modular design

• individually selectable / expandable units

• steam generation from standard tap water

• steam volume at outlet stepless variable

• simple handling by straightforward operating elements

• manometer pressure indication

• compressed air inlet (to be connected to external

compressor)

• modern safety devices, in compliance with the valid norms

(see section 3.2)

Operating modes Elmasteam 3 and 5:

• steam / compressed air (if compressed air connection is

available)

Operating modes Elmasteam 10:

• on the left steam / compressed air and on the right steam /

compressed air (if compressed air connection is available) or

• on the left hot water and on the right steam / compressed air

(if compressor air connection is available)

3.4 Functioning

In a safety pressure vessel, filled by hand or automatically, the

water is heated by means of a powerful heating element up to a

temperature of 173 °C. In the process, a steam pressure of

approx. 8 bar is created.

Pressure generation

The steam can be let out through various different nozzles; the

steam volume is variable.

Steam outlets

Tap water of standard water hardness. When filling is carried out

by hand, distilled water can be used. Advantage: monthly

decalcification of the tank is not required.

Water for steam

generation

Product description

3.5 Diagram: module variants

Variants Inlet Variants Steam jet cleaner Variants Outlet

Elmasteam 3

flling by hand

filling funnel

variant A:

fixed nozzle with foot-activated

switch

Elmasteam 5

automtic filling

pump (Aquamatic)

variant B:

flexible hand piece

connection for external

compressed air inlet

Elmasteam 10

Operating modes:

Elmasteam 3 and 5:

steam / compressed air

Elmasteam 10

steam / compressed air / hot

water

Product description

BA/Elmasteam/GB/0306 © Elma GmbH & Co KG

3.6 Technical details

Elmasteam 3 Elmasteam 5 Elmasteam 10

Mains voltage (Vac) 115 or 230 230 - 240 230 - 240

Mains frequency (Hz) 50 / 60 50 / 60 50 / 60

Mains connections shockproof plug

1 phase

USA: grounded

NEMA 5-20 plug

Shockproof plug

1 phase

USA: grounded

NEMA 6-15 plug

Shockproof plug

1 phase

USA: grounded

NEMA 6-15 plug

Power max. (VA) 1790 2950 2950

Current consumption max.

(A) 115V / 230V

15.5 / 7.8 12.8 12.8

Required mains fuses (A)

115V / 230V

20 / 10 16 16

Protection class IP 20 IP 20 IP 20

Pressure in vessel (bar) 8 8 8

Pressure vessel volume (litre) 3 5 10

Max. filling volume (litre) 2.6 4.5 9.0

Steam temperature at outlet approx. 160 C° approx. 160 C° approx. 160 C°

Housing dimensions

W x D x H (mm)

300 x 305 x 315 300 x 305 x 405 288 x 305 x 615

Units overall dimensions

W x D x H (mm)

300 x 410 x 330 300 x 410 x 430 300 x 410 x 640

Housing material stainless steel stainless steel stainless steel

Weight incl. foot-activated

switch (kg)

15.8 21.4 28.4

Variant A: fixed nozzle with

foot-activated switch

  

Variant B: flexible hand piece

  

Variant C: outlet option

1x hot water + 1x steam

- - 

Variant A+A ; A+B ; B+B

- - 

Variant C+A ; C+B

- - 

Product description

3.7 Safety devices

The Elmasteam steam jet cleaners are equipped with all required

safety devices, such as:

• pessure control valve

• steam discharge device in case of improper opening of the

closing screw cap of the tank

3.8 Elements top view

Illustration 3.1: Unit top view

screw cap of filling opening for manual filling

filling bead/collecting basin for overflow water

handles

ventilation slits

3.9 Elements front view

Elmasteam 3

Elmasteam 5

A C

Illustration 3.2: Operating elements Elmasteam 3 / 5

Product description

BA/Elmasteam/GB/0306 © Elma GmbH & Co KG

Function switch

“off”: Turn the switch to „off“ to switch off the unit.

“steam outlet“: Position for letting out the remaining steam

pressure (before opening the closing screw cap of the tank).

“Stand-by“: Switch the unit to „stand-by” during operating

breaks. This prevents an accidental activation of the steam

outlet. The pressure in the tank is kept up. After switch-over to

„on“ the unit is immediately ready for operation.

“on“: This switch position activates the steam outlet.

Pressure manometer

Indication of the steam pressure in the tank (bar). As soon as the

pressure reaches 8 bar, the unit is ready for operation (see E).

Steam volume control at outlet

For the stepless regulation of the steam volume at the steam

outlet (nozzle) between 0% and 100%.

Visual indicator lamp „ready”

Is turned on as soon as the operating pressure of the tank is

reached and the unit is ready for operation.

Visual indicator lamp „running”

Is turned on when the steam outlet is activated.

Elmasteam 10

A B

Illustration 3.3: Operating elements Elmasteam 10

Visual indicator lamp „min water“

The minimum level of liquid in the tank has been reached. Fill the

tank.

Steam volume control for second outlet (ES10 only)

Description see D.

Product description

3.10 Elements back view

Elmasteam 3

Elmasteam 5

Illustration 3.4a Elmasteam 3 + 5 back view

Elmasteam 10

Illustration 3.4b Elmasteam 10 back view

Product description

BA/Elmasteam/GB/0306 © Elma GmbH & Co KG

compressed air inlet external connection for compressed air

(max. 6 bar)

steam outlet / to flexible hand piece connection

Thread for screwing on the supporting angle for the

flexible hand piece

electric supply foot-activated switch or hand piece

electric supply pump “Aquamatic“

mains connection

ball valve: connection for automatic water supply pump

“Aquamatic“

and outlet duct for emptying of the tank

3.11 Functioning of the fixed nozzle

The connection socket for the fixed nozzle is on the front of the

unit (see illustration 3.1).

For mounting the fixed nozzle and the foot-activated switch

please follow the instructions given in section 4.2.

Mounting

The foot-activated switch controls the steam outlet at the fixed

nozzle. There are 2 switch positions (illustration 3.5).

activates compressed air

50% pressed down

activates hot steam (on Elmasteam 10 also hot water at outlet on

the left possible)

100% pressed down

50%

100%

Illustration 3.5: Foot-activated switch

Initial operation

3.11.1 Flexible hand piece

The connection socket for the flexible hand piece is on the back

of the unit (see illustration 3.3).

For mounting the flexible hand piece please follow the

instructions given in section 7.3.

Mounting

The nozzle is controlled by means of the two keys on the hand

piece:

Control

activates compressed air (see A illustration 3.6)

Right key (white)

activates steam (see B illustration 3.6)

Left key (red)

On Elmasteam 10, the outlet on the right can be operated with

hot water, too.

Illustration 3.6: Flexible hand piece

4 Initial operation

4.1 Placement and ambient conditions

Check the Elmasteam for possible transport damages before

initial operation.

Check for transport

damages

In case of visible damages do not connect the unit to the mains.

Contact your supplier and forwarding agent immediately.

Place the unit in a dry and sufficiently ventilated place.

Keep a clear space of approx.10 cm at the back of the unit:

Placement

The outlet of the safety pressure valve is behind the ventilation

openings on the back of the unit. When the valve is activated,

steam will be discharged through the ventilation openings for a

short period.

Initial operation

BA/Elmasteam/GB/0306 © Elma GmbH & Co KG

Risk of electrocution! In order to prevent electrical accidents

please observe the following instructions:

• Place the unit onto a dry and stable surface. Ensure that the

unit is sufficiently ventilated.

• Keep the workplace and the unit housing dry.

• Do not direct the steam jet or hot water jet onto the unit.

CAUTION

Temperature: + 5°C to + 40°C

No condensation.

Ambient conditions

Connect the Elmasteam to a suitable shockproof socket. The

technical details indicated on the nameplate must correspond

with the available mains connection details, in particular those of

the mains voltage and the current connection value.

Connect the unit to

the mains

4.2 Mounting of fixed nozzle with foot-activated

switch (option)

Ensure that the Elmasteam is switched off. Then proceed as

follows:

1. Open and remove the blind screw on the front of the unit

(illustration 3.2 C / illustration 4.2) by means of a fork wrench

(wrench size14 mm).

Mounting of fixed

nozzle

2. Position the fixed nozzle precisely rectangular onto the

connecting duct (illustration 4.3 B). The outlet of the nozzle

must point vertically downward.

3. Retighten the nut with the fork wrench. (Illustration 4.3:

Correctly mounted fixed nozzle).

4. Check if the nut is correctly tightened and if the nozzle is

fixed with ist outlet pointing vertically downward.

5. Connect the plug of the foot-activated switch to the socket on

the Elmasteam (illustration 3.4 D).

Mounting foot-

activated switch

Illustration 4.2: Connection with Illustration 4.3: Mounted fixed blind

screw nozzle

Initial operation

4.3 Mounting flexible hand piece (option)

Ensure that the Elmasteam is switched off. Then proceed as

follows:

1. Open and remove the blind screw on the back of the unit

(Illustration 4.4) with a fork wrench (wrench size14 mm).

Mounting flexible

nozzle

2. Remove the fixed nozzle from the unit front (if available).

Close the outlet with the blind screw removed in step 1.

3. Position the union nut of the tube connection to the

connection duct. (Illustration 4.5)

4. Rescrew and tighten the union nut do not jam the nut.

5. Check if the nut is correctly tightened.

6. Mount the supporting angle for the tube (illustration 4.6).

7. Mount the supporting angle for the hand piece

(illustration 4.7).

Illustration 4.4 Connection with Illustration 4.5 Mounted fixed blind

screw nozzle

Illustration 4.6 angle support tube Illustration 4.7 angle support

Initial operation

BA/Elmasteam/GB/0306 © Elma GmbH & Co KG

4.4 Filling of the unit - Filling by hand

For initial filling and for refilling after use of the tank water, use

the fulling funnel to fill tap water or distilled water.

Let heated unit cool

down

Risk of scalding by hot steam!

1. Let the unit cool down before opening! Do not open above 0

bar pressure!

2. Turn the function switch to „steam outlet“. Release the

remaining steam through the steam nozzle.

3. Slowly open the screw cap (the integrated pressure relief

system will release any remaining steam from the tank

when the screw cap is opened).

CAUTION

Switch off the unit (switch position “off“).

How to proceed

Turn the screw cap on the unit top (illustraion 3.1) counter-

clockwise.

Open the screw cap

Insert the funnel (included in delivered equipment) in the filling

duct.

Insert funnel

Risk of electrocution due to short circuit in the unit caused by

water entering the housing!

Fill the water carefully, avoid overfilling.

Keep the water from entering the ventilation slits in the unit

covers.

CAUTION

Fill in the water slowly! Ensure that only the required quantity is

filled (see section 3.6 Technical details, tank capacity). Any water

surplus is collected in the filling bead and must be wiped off.

Filling of tank

Close the screw cap.

Close the screw cap

If any water has entered the unit, let it dry over a period of

several hours.

The allowed filling quantity of the tank cannot be exceeded due

to the integrated overflow. The surplus water flows into the filling

bead.

4.5 Automatic filling

(Option pump Aquamatic)

The pump automatically fills the tank with the optimum quantity of

water. There are no idle phases due to required cooling-down

phases as when filled by hand.

Pump guarantees

optimum filling level

As soon as the water level in the tank goes below a certain level,

the pump automatically refills the tank up to the optimum level.

Connect the pump as described in section 4.6. Observe the

safety warnings to prevent damages on the pump.

How to connect the

pump

Initial operation

Open the ball valve on the unit (illustration 3.4 D).

Open water supply

before operation

Open the water supply tap of the mains.

The tap and the ball valve on the pump must remain opened

during operation.

Risk of damage caused by water in case of loosened water

tube!

Shut down the water supply after operation or when the unit is

unattended.

NOTE

4.6 Connection pump “Aquamatic”

The pump with integrated pressure reducer is an optional

accessory and can easily be retrofitted at any time. Order no.:

376 017 0000.

Risk of damage to the pump!

Do not operate the pump with distilled water!

Connect the pump to the city water supply or water from a

softening water device only.

The conductance of softened water must have a value of at

least 15 μSiemens.

The pump requires a minimum pressure of 2 bar at the inlet.

NOTE

Ensure that the Elmasteam is switched off.

Mounting

1. Connect the pump supply duct (illustration 4.8. B) to the

water supply: you need a ½“ tube of the required length.

Connect the tube between the pump supply duct and the

adapter piece of the water tap by means of hose clamps.

Please ensure a secure and safe fixing of the hose.

2. Connect the pump outlet (illustration 4.8. C) to the water

connection (ball valve) of the Elmasteam (illustration 3.4. H).

3. Fasten the electric cable of the pump (illustration 4.8. A) to

the connection “pump” on the Elmasteam (illustration 3.4 F).

4. Open the ball valve on the Elmasteam (illustration 3.4 H).

5. Open the tap of the water supply.

6. Switch on the Elmasteam (switch position “on“).

For initial filling of the tank we recommend to open the screw cap

at the filling duct to let the air escape from inside the unit. As

soon as the LED “maximum” on the pump turns on the screw cap

can be closed again.

Handling during operation

Caution! The water tap and the ball valve on the pump must

remain opened during operation. Risk of damage to the

pump. Ensure that the water supply to the pump is stopped

as soon as the unit is left unattended for any length of time.

Water connections

must remain opened

during operation

When the Elmasteam is switched on, the pump automatically fills

the tank with the optimum quantity of water. As soon as the water

level in the tank goes below a certain filling level, the pump

automatically refills the tank up to the correct level. The filling

process is indicated by the yellow lamp “running” (illustration 7.2

D). When the maximum filling level of the tank is reached, the

green indicator lamp “maximum” is turned on (illustration 7.2 E).

Pump guarantees

optimum filling level

D E

A B C

Illustration 4.8 Pump back view Illustration 4.9 Pump front view

5 Handling during operation

For reasons of safety, the steam cleaner must be operated by

authorized and correctly instructed personnel only.

Authorized personnel

Risk of scalding by hot steam!

• Unauthorized third persons must not keep within reach of

the steam jet during operation of the unit.

• Ensure your own safety! Be careful when the steam outlet is

activated.

• Avoid hazardous situations caused by unintended activation

of the steam outlet. Switch the unit into „stand-by“ mode

during operating breaks.

CAUTION

Put the unit into operation as described in section 4.

Preconditions

Make sure before start-up that the tank is filled. Otherweise fill

the tank as described in section 4.

Tank must be filled

Switch on the Elmasteam by turning the function switch

(illustration 3.2 / 3.3 A) to the “standby” position. The unit starts

to generate pressure (see manometer, illustration 3.2 / 3.3 B).

Switch the unit in

position ”standby”

As soon as the operating pressure (8 bar) is reached, the green

lamp “ready” indicates that the unit is ready for operation. As

soon as a nozzle is activated the indicator lamp goes out.

Green indicator lamp

“ready”

Handling during operation

Turning the function switch to the “on” position: The steam outlet

can be activated now.

Switch the unit into ”stand-by“ operating mode during operating

breaks. This prevents unintended activation of the steam outlet.

Switch the unit in

position ”standby”

Use the recommended accessories for the safe holding of small

items: sieve small, sieve large or tweezers with plastic coating.

Holding the work

piece

For the protection of the work surface a special collecting basin

with plastic knobs is available (accessories). This device

prevents the uncontrolled steaming into the ambient space and

also protects the falling down of small items onto the floor (see

illustration 3.3).

Collecting basin

Check before cleaning if the cleaning item, the jewellery piece or

the dental surgery equipment is suitable for this kind of cleaning,

particularly with regard to their thermal and mechanical

resistance.

Suitability o

cleaning items

Keep the cleaning item approx. 1 cm from the nozzle when

holding it into the steam zone. Check the cleaning result at short

intervals (visual inspection).

Distance to steam

outlet

5.1 Working with the hand piece

Risk of static chargeing of the hand piece during steam

operation!

Hold the hand piece so that you are in permanent contact with

the grounding contact (see C illustration 3.6) on the side of the

hand piece.

The electric charge that might be created is not dangerous.

CAUTION

Activate the steam function by pressing the red (left) key on the

hand piece.

The steam outlet remains activated as long as the key is

pressed. (The hand piece heats up slightly during the process.)

Red key: steam

Release the key to interrupt the steam outlet.

(On the Elmasteam 10 this key also activates the hot water.

Optional: hot water at left outlet connection.)

Keep the cleaning item approx. 1 cm from the nozzle when

holding it into the steam zone. Check the cleaning result at short

intervals.

Cleaning of items

If the unit is connected to an external compressed air supply, the

nozzle can be used for compressed air, too. The cleaning item

can be dried with compressed air.

Follow-up drying

Activates the compressed air at the nozzle. Press the white

(right) key on the hand piece. If the key is released, the outlet of

compressed air at the nozzle is interrupted. (This function is

available only with correct compressed air connection on the

back of the unit. See section. 6.2).

White key:

compressed ai

Cleaning options

5.2 Working with the fixed nozzle

The steam/compressed air outlet at the fixed nozzle is controlled

by the foot-activated switch. As soon as the nozzle is activated,

the indicator lamp “running” in the operating panel is turned on.

Control via foot-

activated switch

There are two switch positions:

Switch positions

Activates the compressed air at the nozzle. (Only if the unit is

correctly connected to a compressor on the back of the housing.)

50% pressed down

Activates the steam. (On Elmasteam 10 this key also activates

the hot water. Optional: the ES 10 can be operated with hot

water via the left outlet connection.)

100% pressed down

Keep the cleaning item approx. 1 cm from the nozzle when

holding it into the steam zone. Check the cleaning result at short

intervals (visual inspection).

Cleaning of the items

If the unit is connected to an external compressed air supply, the

nozzle can be used for compressed air, too. The cleaning item

can be dried with compressed air.

Follow-up drying

6 Cleaning options

6.1 Operation with hot water (Elmasteam 10 only)

On the Elmasteam 10 the outlet on the left (either flexible hand

piece or fixed nozzle) can be operated with hot water. This

alternative operating mode is optional and must be requested on

ordering the unit, so that the steam cleaner can be manufactured

accordingly.

6.2 Operation with compressed air

After the cleaning o the item (steam or hot water), there is a

residual humidity on the material which can easily be dried by

means of compressed air.

All units are fitted with a norm-sized connection for compressed

air on the back of the housing. If a compressor is available the

unit can be connected to the compressed air system

(max. 6 bar !). (Connection illustration 3.4 A). The Elmasteam

can now be switched over between steam and compressed air

operating mode on the hand piece or by foot-activated switch.

Connection

7 Maintenance / care / repair

Maintenance works requiring the opening of the unit are not

necessary.

Do not open the unit

Read and observe the following instructions before carrying out

any maintenance works.

Page is loading ...

Elma Elmasteam 10 Operating Instructions Manual

Brand: Elma

Model: Elmasteam 10

Type: Operating Instructions Manual

This manual is also suitable for

Download PDF

report

Elma Elmasteam 10 Operating Instructions Manual

This manual is also suitable for

Elma Elmasteam 10 Operating Instructions Manual

Related papers

Other documents