Assembly Instructions
Assembly Instructions
Stage 1 – Fitting the Unit
fig. 2
B
A
Metal Lock
C
D
NOTE: It would be useful to ask
someone to help you at this
stage.
3. B
to the Seat
Unit
A .
push fit. You should hear them
into position.
See fig. 2.
NOTE: Carefully line up the two
align correctly.
Attach the Back Rest
side metal locks. Ensure they
4.
Fit the velcro cover which is on the back
rests onto the velcro on the
seat cushion.
Firstly attach the arm cushion.
2.
You can find the assembly steps
in the last page.
Engage the metal locks and
lock
fig. 1
A
1.
One armrest is tied the bottom
of sofa,and the other is
put behind of seat cushion
See fig.1.
A
B
E
fig. 3
WARNING:If the supply
cord is damaged,it must be
replaced by the manufacturer,
its service agent or similarly
qualified persons in order to
avoid a hazard.
.
5.Remove and unpack the fittings which
are stored under the Seat Unit
A
See fig.3.
CAUTION:
- Beware of entrapment. Keep
hands and fingers clear of the
the controls.
- Ensure that children or pets are
not playing or lying in the way
operated.
- Prevent children from playing
on the furniture or with the
controls.
tilt mechanism when operating
when the tilt mechanism is
WASTE ELECT RI CA L PR OD UCTS
SH OU LD NO T BE DI SP OS ED OF
WI TH HO US EHO LD WAS TE .PL E ASE
RECYCL E WHERE FAC ILITI ES
EXI ST .
CH ECK WI TH YO UR
LOCAL AUTH OR ITY
FOR RECYAL
ING ADVI CE .
NOTE:It would be useful to ask
someone to help you at this
Sta e.
g