Vidikron VP-6500VHDa User manual

Brand: Vidikron

Model: VP-6500VHDa

Category: Projectors

Type: User manual

This manual is also suitable for

HIGH DEFINITION PLASMA DISPLAYS

Models VP-6500VHD and VP-6500VHDa

VERSION 1.0

OWNER’S OPERATING MANUAL

Vidikron PlasmaView Owner’s Operating Manual iii

PRE

IMINAR

THREE YEAR LIMITED WARRANTY

For Plasma Displays

Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation, setup

and care, you should enjoy many years of unparalleled video performance.

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other

important documents.

SERVICE LABOR: Vidikron will pay for service labor by a Vidikron Authorized Service Center when needed as a result of a

manufacturing defect for a period of three (3) years from the effective date of delivery to the end user (excluding the plasma glass

panel).

PARTS (not including plasma glass panel): Vidikron will provide new or rebuilt replacement parts for the parts that fail due to

defects in materials or workmanship for a period of three (3) years from the effective date of delivery to the end user. Such

replacement parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.

PLASMA GLASS PANEL: Vidikron will pay for service labor by a Vidikron Authorized Service Center when needed as a result of a

manufacturing defect for a period of one (1) year from the effective date of delivery to the end user. In addition, Vidikron will

provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of one (1)

year from the effective date of delivery to the end user. Such replacement parts are then subsequently warranted for the remaining

portion (if any) of the original warranty period.

Image burn-in on plasma display panels is specifically excluded from coverage under this Limited Warranty. Image burn-in is the

result of misuse of the product and therefore cannot be repaired under the terms of this Limited Warranty.

Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of

time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers for

this reason.

TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are left on your plasma display panel for no more than a

few minutes. Also ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is

present on the left and right edges of the screen) are used as infrequently as possible. This will prevent permanent image burns on

your plasma display panel, which can be seen permanently under certain conditions once burn-in has occurred.

The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This is

why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after being

displayed continuously for an extended period of time).

This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not

cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from

accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper

maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and brownouts;

damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote control units,

damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this Limited Warranty.

WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

iv Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

CAUTION: THIS LIMITED WARRANTY ONLY COVERS VIDIKRON PRODUCTS PURCHASED FROM VIDIKRON AUTHORIZED DEALERS.

ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. MOREOVER, DAMAGE

RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE

UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN

AUTHORIZED VIDIKRON DEALER TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY

THE FINE PERFORMANCE OF WHICH YOUR VIDIKRON PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY VIDIKRON

AUTHORIZED PERSONNEL.

Vidikron limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There

are no express warranties. Vidikron also excludes any obligation on its part for incidental or consequential damages related to the

failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and some

states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or exclusions may

not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as

evidence of the purchase date.

Please fill out and mail your warranty registration card. It is imperative that Vidikron knows how to reach you promptly if we should

discover a safety problem or product update for which you must be notified.

Repairs made under the terms of this Limited Warranty covering your Vidikron video product will be performed at the location of

the product, during usual working hours, providing location of product is within normal operating distance from a Vidikron

Authorized Service Center. In some instances it may be necessary for the product to be returned to the Vidikron factory for repairs.

If, solely in Vidikron’s judgment, location of product to be repaired is beyond normal operating distance of the closest Vidikron

Authorized Service Center, or the repair requires the unit be returned to the Vidikron factory, it is the owner’s responsibility to

arrange for shipment of the product for repair. These arrangements must be made through the selling Vidikron Dealer. If this is not

possible, contact Vidikron directly for a Return Authorization number and shipping instructions. Vidikron will return product

transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping costs will be the

responsibility of the owner.

copyright, trademark and other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any

mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.

Vidikron, Vision, DVSI, Imagix, CineWide, AutoScope, V

Aperture Control, CSMS and IntelliWide are trademarks of Runco, LLC. All

other trademarks and registered trademarks used in this document are the property of their respective owners.

Vidikron products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents Pending.

RIGHTS, LIMITS AND EXCLUSIONS:

EFFECTIVE WARRANTY DATE:

IMPORTANT – WARRANTY REGISTRATION:

CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:

Vidikron PlasmaView Owner’s Operating Manual v

PRE

IMINAR

To locate the name and address of the nearest Vidikron Authorized Service Center, or for additional information about this Limited

Warranty, please call or write:

VIDIKRON

Attn: Customer Service Department

2900 Faber Street

Union City, CA 94587

Ph: (510) 324-5900

Fax: (510) 324-5905

Toll Free: (888) 4VIDIKRON

VIDIKRON PRODUCT INFORMATION

RETAIN THIS INFORMATION FOR YOUR RECORDS

_________________________________________________________ ________________________________________

Model Purchased Date

____________________________________________________________________________________________________________

Serial Number

____________________________________________________________________________________________________________

Vidikron Authorized Dealer Name

____________________________________________________________________________________________________________

Address

____________________________________________ __________________ ________________________

City State/Province Postal Code

____________________________________________ _______________________________________________________

Phone Fax

ADDITIONAL INFORMATION:

vi Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

Thank you for your purchase of this quality Vidikron video product! It has been designed to provide you with the quality of video

that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the

menus and operation.

CAUTION

To turn off main power, be sure to remove the plugs from power outlets. The power outlet socket should be installed as near to the

equipment as possible, and should be easily accessible.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S

POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING

This equipment has been tested and found to comply with the limits for a Class ‘B’ digital device, pursuant to Part 15 of FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the Installation Manual, may cause harmful interference to radio communications. Operation of this equipment in

a residential area may cause harmful interference, in which case the user will be required to correct the interference at his own

expense.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Please read and follow the safety precautions listed below to ensure the equipment is free from damage, and to ensure that no

injury will occur as a result of improper use.

• Do not insert any object, especially metal or liquids, into the plasma display.

• Do not place any objects containing water or any other liquid on top of the plasma display.

• Do not place the units in direct sunlight, near heaters or in extremely dusty or humid locations.

• Do not install this system outdoors or otherwise exposed to the elements.

• Do not place heavy objects on top of the plasma display.

• If the power cord is damaged or frayed in any way, electrical shock and/or fire may result. Do not place objects on the power

cord, and keep the cord away from heat-emitting devices. Should the power cord become damaged in any way, please contact

your Vidikron Dealer for a replacement cord.

• Do not remove the cover of the plasma display for any reason. If any problems arise with the unit, please contact a Vidikron

Dealer or Vidikron for service. Removing the covers will void the warranty.

Safety Precautions

WARNING

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure that

may be of sufficient magnitude to constitute a risk of electric shock.

This symbol is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Vidikron PlasmaView Owner’s Operating Manual vii

1Table of Contents

PRE

IMINAR

THREE YEAR LIMITED WARRANTY .......................................................................................... iii

Safety Precautions ................................................................................................................... vi

1. Introduction ........................................................................................................................ 1

About This Manual ............................................................................................................................................ 1

Target Audience......................................................................................................................................... 1

If You Have Comments About This Manual... .................................................................................. 1

Textual and Graphic Conventions ....................................................................................................... 1

Using This Manual ............................................................................................................................................. 2

Description, Features and Benefits ............................................................................................................. 3

Key Features and Benefits....................................................................................................................... 3

Parts List ....................................................................................................................................................... 4

2. Controls and Functions ...................................................................................................... 5

PlasmaView at a Glance .................................................................................................................................. 5

Controls and Indicators ........................................................................................................................... 5

Connectors .................................................................................................................................................. 6

VHD Controller Front Panel ........................................................................................................................... 7

VHD Controller Rear Panel ............................................................................................................................. 8

Outputs.......................................................................................................................................................... 8

Inputs ............................................................................................................................................................. 8

VHD Controller Remote Control ................................................................................................................. 10

3. Installation ........................................................................................................................13

Remote Control ................................................................................................................................................13

Notes on Batteries ...................................................................................................................................13

Notes on Remote Control Operation................................................................................................13

Quick Setup .......................................................................................................................................................15

Installation Considerations ..........................................................................................................................16

High-Altitude Operation .......................................................................................................................16

Mounting the PlasmaView on a Wall or Table Stand..................................................................16

Ambient Light ...........................................................................................................................................17

Ventilation ..................................................................................................................................................17

Other Considerations .............................................................................................................................18

Table of Contents

viii Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

Connections to the PlasmaView and VHD Controller ........................................................................19

Connecting the PlasmaView to the VHD Controller ...................................................................19

Connecting Source Components to the VHD Controller ..........................................................21

RS-232 Controller Connection ............................................................................................................25

Connecting 12-Volt Trigger Outputs to External Equipment..................................................25

Connecting an External IR Receiver to the VHD Controller......................................................26

4. Operation .......................................................................................................................... 27

Turning on the Power ....................................................................................................................................27

Setting the Computer Display Properties ...............................................................................................28

Using the VHD Controller Menus ...............................................................................................................29

Main Menu ................................................................................................................................................31

Input Source .............................................................................................................................................31

Aspect Ratio ..............................................................................................................................................31

Picture .........................................................................................................................................................33

Input Position............................................................................................................................................36

ISF Presets...................................................................................................................................................37

Information ................................................................................................................................................37

Calibration ..................................................................................................................................................38

Service..........................................................................................................................................................40

5. Maintenance and Troubleshooting ................................................................................ 45

Cleaning ..............................................................................................................................................................45

Cleaning the Display Panel Body and Remote Control..............................................................45

Cleaning the Screen................................................................................................................................45

Cleaning the Vents ..................................................................................................................................45

Troubleshooting Tips .....................................................................................................................................46

6. Serial Communications ....................................................................................................49

RS-232 Connection and Port Configuration ..........................................................................................49

Serial Command Syntax ................................................................................................................................49

7. Specifications .................................................................................................................... 55

PlasmaView Specifications ...........................................................................................................................55

VHD Controller Specifications .....................................................................................................................56

PlasmaView Dimensions ...............................................................................................................................57

Vidikron PlasmaView Owner’s Operating Manual ix

PRE

IMINAR

1List of Figures

2-1. PlasmaView Front-Panel Controls and Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2-2. PlasmaView Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2-3. VHD Controller Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2-4. VHD Controller Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2-5. VHD Controller Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3-1. Available Range of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3-2. Ventilation Requirements for Enclosure Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3-3. Connecting the PlasmaView to the VHD Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3-4. RS-232 Connection from the VHD Controller to the PlasmaView . . . . . . . . . . . . . . . . . . . . . . . . . 20

3-5. HDMI Source Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3-6. Digital (DTV) RGB Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3-7. Analog RGB Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3-8. Composite, S-Video and Component Video Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3-9. RS-232 Control System Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3-10. Connecting 12-Volt Trigger Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3-11. External IR Receiver Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4-1. VHD Controller OSD Menu Structure for PlasmaView. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4-2. Typical PLUGE Pattern for Adjusting Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4-3. Typical Gray Bar Pattern for Adjusting Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint . . . . . . . . . . . . . . . . . . . . . . . . 35

4-5. Typical Test Pattern for Adjusting Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

7-1. PlasmaView Model VP-6500VHD Dimensions (with Optional Table Stand) . . . . . . . . . . . . . . . 57

List of Figures

x Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

Notes:

Vidikron PlasmaView Owner’s Operating Manual 1

PRE

IMINAR

1.1

About This Manual

This Owner’s Manual describes how to install, set up and operate the Vidikron PlasmaView

High-Definition Plasma Display (Model VP-6500VHD or VP-6500VHDa).

Throughout this manual, the Vidikron PlasmaView High-Definition Plasma Display is referred

to simply as the “PlasmaView.” Except where otherwise indicated, the information in this

manual applies to both PlasmaView models.

Target AudienceVidikron has prepared this manual to help home theater installers and end users get the

most out of the PlasmaView.

Vidikron has made every effort to ensure that this manual is accurate as of the date it was

printed. However, because of ongoing product improvements and customer feedback, it

may require updating from time to time. You can always find the latest version of this and

other Vidikron product manuals on-line, at www.Vidikron.com.

If You Have Comments About

This Manual...

Vidikron welcomes your comments about this manual. Send them to [email protected].

Textual and Graphic

Conventions

Text Conventions: The following conventions are used in this manual, in order to clarify the

information and instructions provided:

• Remote control button identifiers are set in upper-case bold type; for example, “Press EXIT

to return to the previous menu.”

• Computer input (commands you type) and output (responses that appear on-screen) is

shown in monospace (fixed-width) type; for example: “To change the aspect ratio to 16:9,

type 16:9 <Enter>.”

• All keys with functional names are initial-capped, set in bold type and enclosed in angle

brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>

and <Tab>.

• <Enter> indicates that you may press either the RETURN or ENTER key on your computer

keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used to

highlight important information, as in this example:

1Introduction

A carriage return must be used after each command or string.

Note

Introduction

2 Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

Graphic Conventions: These symbols appear in numerous places throughout the manual,

to emphasize points that you must keep in mind to avoid problems with your equipment or

injury:

1.2

Using This Manual

Use the following table to locate the specific information you need in this manual.

TIPS highlight time-saving short cuts and helpful guidelines for using

certain features.

NOTES emphasize text with unusual importance or special significance.

They also provide supplemental information.

CAUTIONS alert users that a given action or omitted action can degrade

performance or cause a malfunction.

WARNINGS appear when a given action or omitted action can result in

damage to the equipment, or possible non-fatal injury to the user.

DANGER appears when a given action can cause severe injury or death.

Tip

Note

Caution

WARNING

DANGER!

If you need... ... Turn to page:

Information about obtaining service iv

General information about the PlasmaView

High-Definition Plasma Display

Installation instructions 13

First-time configuration instructions 27

Advanced configuration instructions 38

Troubleshooting tips 46

Specifications for the PlasmaView High-Definition

Plasma Display

Introduction

Vidikron PlasmaView Owner’s Operating Manual 3

PRE

IMINAR

1.3

Description, Features and

Benefits

The new Vidikron VP-6500VHD plasma monitor establishes a higher threshold for flat panel

display products. This is our largest and highest-resolution plasma ever, at 65 inches diagonal

and 1920 x 1080 (1080p) native resolution.

In addition, the VP-6500VHD takes picture quality to a whole new level boasting our

brightest picture, best contrast ratio, deepest black levels and most spot-on high definition

colorimetry ever! In addition, sophisticated 16-bit digital video processing, a new milestone,

results in 4096 steps of graduation for seamless images, completely void of the primitive

“solarization” and “stair stepping” characteristics previously plaguing digital flat panel

displays.

Discrete multiple aspect ratio control includes IntelliWide™ for viewing 4:3 content in

widescreen without appreciable picture degradation, as well as ISF(ccc) calibration modes to

easily maintain ISF standards. The automation interface includes RS-232 control with discrete

aspect ratio, input and power on/off selection.

The included VHD Digital Video Controller/Processor provides a pure digital signal path from

input to output as well as a broad array of video input choices, all available from its position

in the equipment rack, with only digital video and control cables running to the display itself.

Finally, the VP-6500VHD not only represents a leap forward in high definition flat-panel

technology, but our engineering advances in plasma design ensure that it will enjoy a long

life in any installation, with operation extending to as much as 60,000 hours. At less than

4-1/2 inches thin, the VP-6500VHD provides unlimited installation flexibility as well.

For high-altitude installations, Vidikron also offers the VP-6500VHDa with industry-leading

high-altitude compliance to over 9000 feet mean sea level (MSL). The VP-6500VHDa shares all

other features and specifications with the VP-6500VHD.

Key Features and BenefitsThe PlasmaView offers these key features and benefits:

• 16:9 Native Resolution: 1920 x 1080

• Multiple Aspect Ratios with IntelliWide™ Mode

• Includes the new VHD video controller/processor

• 65-inch diagonal image area

• Only 4-1/2 inches thin

• Model VP-6500VHDa is high-altitude compliant to 9000 feet

• Exceptional detail and artifact-free video enhancement

• Imagix™ video processing with 3:2 film detection circuitry

Introduction

4 Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

Parts List Your PlasmaView is shipped with the following items. If any items are missing or damaged,

please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON.

• PlasmaView High-Definition Plasma Display

• AC Power Cords (2)

•Remote Control Unit and two (2), AAA-size batteries

• RJ-11 Telephone Cable, 50 feet (15.24 meters)

• Serial Port Adapter, RJ-11 Female to DB-9 Female

• Rack-mount hardware for the VHD Controller

•Cable Ties (2)

• Warranty information and registration card

• Vidikron PlasmaView Owner’s Operating Manual (this document)

Optional Accessories:

• Wall Mount Kit (Vidikron part number VIHK-000315)

• Table Stand (Vidikron part number VIHK-000320)

➤

Vidikron PlasmaView Owner’s Operating Manual 5

PRE

IMINAR

2.1

PlasmaView at a Glance

Controls and IndicatorsFigure 2-1 shows the PlasmaView front-panel controls and indicators.

Figure 2-1. PlasmaView Front-Panel Controls and Indicators

1. DISPLAY STAND

Optional accessory for table-top installations.

2. POWER BUTTON

Connects or disconnects the display panel from the AC power source.

3. STANDBY/ON INDICATOR

- Lights green to indicate normal operation;

- Lights red to indicate that the PlasmaView is in standby mode.

4. REMOTE CONTROL SENSOR

Receives the signals from the remote control.

2Controls and Functions

2 4

Controls and Functions

6 Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

Connectors Figure 2-2 shows the rear-panel connector locations on the PlasmaView.

Figure 2-2. PlasmaView Rear Panel

1. SLOT 1

Not used.

2. SLOT 2 (DVI-D input)

HDCP-compliant digital video input. Connect the HDMI output from the VHD

Controller to this input. (The audio input is not used. Connect the audio outputs from

your sources to an external audio receiver.)

3. SLOT 3

Not used.

4. PC IN

Not used.

5. RS-232C (9-pin, male D-Sub)

Connect the RS-232 OUT port on the VHD Controller to this input.

➤

SERIALPC IN

AUDIO

SLOT1 SLOT3

/R P

Y/G

AUDIO

COMPONENT/RGB IN

SLOT2

AUDIO

DVI-D IN

1 2 3 4 5

Controls and Functions

Vidikron PlasmaView Owner’s Operating Manual 7

PRE

IMINAR

2.2

VHD Controller Front

Panel

Figure 2-3 shows the controls and indicators on the VHD Controller front panel; the

paragraphs that follow describe them.

Figure 2-3. VHD Controller Front Panel

1. POWER BUTTON

Press once to toggle from standby mode to on mode. Press it again to return to standby

mode. For a discrete on or off command, you can use the direct access buttons on the

remote control.

2. IR SENSOR

Receives IR commands from the remote.

3. VACUUM FLUORESCENT DISPLAY

Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu

or – if no menu is selected – the current source, signal format (NTSC or PAL), input

resolution and aspect ratio.

Component SD NTSC 480i

16:9 VP6500

1 2 3

Controls and Functions

8 Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

2.3

VHD Controller Rear Panel

Figure 2-4 shows the rear connector panel on the VHD Controller.

Figure 2-4. VHD Controller Rear Panel

Outputs 1. HDMI OUT

Connect this to the SLOT 2 (DVI-D) input on the PlasmaView (see Figure 2-2).

Inputs 2. HDMI 1 / HDMI 2 (Digital)

Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner with

a DVI or HDMI output.

3. HD1 / HD2 (5 x Analog BNCs)

Two inputs (five BNCs per input) for connecting either RGB or component

high-definition television signals. The VHD Controller automatically detects the signal

format: RGB(HV) or YPrPb, 480p, 720p, 480i, 576i or 1080i.

4. COMPONENT VIDEO (RCA connectors)

Standard Definition (480i/576i) Component (YPrPb) input. This is the input for

component video from sources such as DVD players.

5. COMPOSITE VIDEO INPUT

Standard composite video input for connecting a VCR, laser disc player or other

composite video source.

6. S-VIDEO 1 / S-VIDEO 2

Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super

VHS (S-VHS) VCR.

7. 12-VOLT (750 mA) TRIGGER OUTPUTS

Connection for up to three (3), 12-volt trigger-controlled devices such as retractable

screens or screen masks.

Pb Pr Y

Video

RS-232 Control

S-Video 1

S-Video 2

HD1

HD2

R/Pr G/Y B/Pb

R/Pr G/Y B/Pb H V

HDMI 1 HDMI 2HDMI Out

TRIGGERS

RS-232 Out

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE CENTER.

AVI S: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

100-230VAC 50-60 Hz, 165 Watts Max

INPUTS

SYSTEM CONTROL INTERFACE

Component Video

Serial No

Video Processor / Controller

Model

Made In USA

12 13

➤

For best results, do not run your DVD player in progressive mode.

Tip

Controls and Functions

Vidikron PlasmaView Owner’s Operating Manual 9

PRE

IMINAR

8. ComLink (RS-232) OUTPUT

Connect this to the ComLink (RS-232) input on the projector, using the provided

communication cable.

9. IR

Wired input from a wired remote control or infrared receiver. It is a 3.5-mm, mini phono

jack, wired as follows:

Ring = +5V

Tip = IR Input

Sleeve = Ground

10. RS-232 CONTROL PORT

A female, 9-pin D-sub connector for interfacing with a PC or home theater

automation/control system.

11. POWER INPUT (100 to 240 VAC)

Connect the VHD Controller to power here.

12. MAIN AC FUSE

This is the main AC input fuse (5mm x 20mm, 500 mA, 250V slow-blow).

13. MAIN POWER SWITCH

Disconnects or applies power to the VHD Controller.

When an external remote control or infrared receiver is connected to the

wired IR input, the IR sensor on the front of the VHD Controller is disabled.

Note

Controls and Functions

10 Vidikron PlasmaView Owner’s Operating Manual

PRE

IMINAR

2.4

VHD Controller Remote

Control

Figure 2-5 shows the VHD Controller remote control, and the paragraphs that follow describe

its functionality.

Figure 2-5. VHD Controller Remote Control

Page is loading ...

Vidikron VP-6500VHDa User manual

Brand: Vidikron

Model: VP-6500VHDa

Category: Projectors

Type: User manual

This manual is also suitable for

Download PDF

report

Vidikron VP-6500VHDa User manual

This manual is also suitable for

Vidikron VP-6500VHDa User manual

Related papers

Other documents