Acrox Technologies K2K User manual

Brand: Acrox Technologies

Model: K2K

Category: Keyboards

Type: User manual

This manual is also suitable for

PRDKB15

Ultrathin Mini iPad

Bluetooth Keyboard

K2K USER'S GUIDE

Ver.:1.00

CAUTION: To use this product properly, please read the user's guide before installation

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

IMPORTANT NOTE:

Radiation Exposure Statement:

The product comply with the US portable RF exposure limit set forth for an

uncontrolled environment and are safe for intended operation as described in

this manual. The further RF exposure reduction can be achieved if the

product can be kept as far as possible from the user body or set the device to

lower output power if such function is available.

This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

Industry Canada statement:

This device complies with Industry Canada’s licence-exempt RSSs.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables

aux appareils radio exempts de licence. L’exploitation est autorisée aux deux

conditions suivantes:

1) l’appareil ne doit pas produire de brouillage;

2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Bluetooth Keyboard

Thank you for your purchasing the Bluetooth keyboard .Before you use

this product, please read this manual thoroughly and use this product

correctly. After you read this manual, please keep it in place and refer to

it when necessary.

Supplied with the product:

The following items are included in the package. Please make sure all

items are included as you open the package. If there is any item missing

or damaged, please contact the reseller who sold you this product, or

our support center.

- Bluetooth Keyboard

- User’s Guide

- USB Charging cable

System Requirements:

You must have a Bluetooth enabled computer to use this device.

The Bluetooth keyboard is designed to work with Bluetooth enabled

devices. Bluetooth is generally enabled through either built-in Bluetooth

hardware, a Bluetooth USB adapter, or other type of Bluetooth adapter.

Windows XP with Bluetooth enabling software that includes support for

keyboards is required.

IPad iOS 6 , Mac OS X (10.2.8 or later) running Bluetooth software

version 1.5 or later is required.

Functional Introduction

Hot Keys (* compound key, Press with Fn key)

Home Screen

Get back to the Home screen

*Lock

Force iPad to go into sleep/lock mode

*Search

Search inside apps , albums, artists, or song

*Soft Keyboard

Open the Soft Keyboard

*Copy

Copies the selected item(s) to the Clipboard

*Cut

Removes the current selection and places it on

the clipboard.

*Paste

Paste the copied or cut item(s) from Clipboard

*Previous Track

Switches to the previous media track

*Play/Pause

Switches between playing and pausing

*Next Track

Switches to the next media track

*Mute

Mutes (turns off) the computer's sound

*Volume -

Decreases the computer's sound volume

*Volume +

Increases the computer's sound volume

*Pairing Button

Pairing Button

Power Switch

Power On / Off Switch

Micro USB Charger Jack

DC Input Connect

LED Indictor

Pair / Battery low / Charger status

Installing Hardware

Step1: Activate by turning on the power switch located at the side of the

keyboard.

Step2: Press the Pairing button to start the pairing process, the red LED

should start blinking.

Step3: Start your device’s Bluetooth set up function to search for this

Bluetooth keyboard.( iPad is in searching situation. It can search

Bluetooth keyboard. Search for Bluetooth keyboard and remind to enter

password in the Bluetooth keyboard)

Note: There will not have any prompt, just click enter after your enter

password in the iPad screen. It will be connected successfully.

Step4: Connect successfully , The keyboard is in working situation.

Charge

The red LED keep flashing in your working , the keyboard is short of

power. It is time to charge the keyboard.

Step1: Use the USB charging cable plug into outlet, put one end of the

plug into keyboard USB charging cable.

Step2: Now red indictor, after charging finish, red indictor off.

LED Indicator :

Definition

Indicator

Description

“Pair” / “Battery low”

/“Charging”

Red

To indicate Keyboard paring ,

charging and battery low

status.

Note:

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired

operation.

Now, enjoy and have fun!

Trouble Shooting Guide

• Ensure that the computer’s Bluetooth technology is working. If a

Bluetooth USB adapter is being used, make sure it is plugged in properly.

Try un-plugging and re-plugging the USB adapter. On some Systems, a

restart may be required.

• If the red LED starts blinking while the keyboard is in use, it is indicating

a battery low status and it is time to change a new battery.

• On the PC, refer to the Bluetooth software help guide to ensure that

Bluetooth is working properly. The PC must be running a version of

Bluetooth for Windows XP that supports input devices (mice and

keyboards).

• On the Mac, click on the Bluetooth icon within the system preferences

pane. Refer to the Apple Bluetooth help file to ensure Bluetooth is

working properly.

• Ensure your batteries are fully charged and inserted correctly.

• If the keyboard still is not discovered, ensure the correct versions of the

software is installed. Mac OS10.2.8 or higher and Apple Bluetooth®

software 1.5 or higher.

• Try moving the keyboard closer to the computer or to the adapter.

• Ensure that there are no other Bluetooth devices in discover mode.

Acrox Technologies K2K User manual

Brand: Acrox Technologies

Model: K2K

Category: Keyboards

Type: User manual

This manual is also suitable for

PRDKB15

Download PDF

report

Acrox Technologies K2K User manual

This manual is also suitable for

Acrox Technologies K2K User manual

Other documents