Plantronics Backbeat Go 810 series Owner's manual

Category
Headphone/headset accessories
Type
Owner's manual

This manual is also suitable for

BackBeat GO 810 Series
User Guide
Contents
Pair 3
Get Paired 3
Pair second device 3
Pair to Mac 3
Charge 4
Charge 4
The basics 5
Headset overview 5
Power on/off 5
Play/pause music 5
Track selection 5
Activate voice assistant 5
Make/Take/End Calls 6
Mute 6
ANC 6
Set EQ 6
Find your headset 6
Support 7
2
The first time you power on your headphones, the pairing process begins.
1 Slide the power switch on. You hear "pairing" and the LEDs flash red and white.
2 Activate Bluetooth
®
on your phone and set it to search for new devices.
iPhone Settings > Bluetooth > On*
Android Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
3 Select “PLT BBGO800 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
1 Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and white.
2 Select “PLT BBGO800 Series” in your device's Bluetooth Settings.
If your Mac is Bluetooth enabled, you can pair your headset to it.
1 Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). You
will hear "pairing" and the LEDs will flash red and blue.
2 On your Mac, choose Apple menu > System Preferences > Bluetooth.
3
Click Set Up New Device or "+", select "PLT BBGO800 series stereo" and follow the onscreen
instructions.
Pair
Get Paired
Pair second device
Pair to Mac
3
It takes up to 120 minutes to fully charge your headset. The LEDs turn off once charging is
complete.
TIP
To check the headset battery status, press the Power/Bluetooth button while wearing your
headset. The headset must be in an idle state.
Your headset has up to 22 hours of listening time with ANC on and 28 hours with ANC off.
Charge
Charge
4
ANC
Active Noise Cancelling
EQ
:02
:02
Siri
Google Now
ANC Active Noise Cancelling
Volume up
Volume down
Track forward
Play/pause music
Track backward
Call button
Siri, Google
Now
Voice-enabled assistant
Bluetooth pair button
Power on/off
Headset LEDs
Mute/unmute
EQ settings
Slide the switch to power on or off.
Tap the Play/pause button.
Tap the Forward button or Back button to control the track selection.
If your smartphone has a voice-enabled assistant, press and hold the Play/pause button for 2
seconds and wait for the phone prompt.
The basics
Headset overview
Power on/off
Play/pause music
Track selection
Activate voice assistant
5
Answer or end a call
Tap the Play/pause button.
Decline a call
Press and hold the Play/pause button for 2 seconds.
Call back last call (smartphone)
To dial the last number you dialed, double-tap the Play/pause button.
While on an active call, tap the EQ/Mute button.
Active Noise Canceling (ANC) reduces external noise and enhances your music and sound quality.
1 Press and hold the volume up and down buttons for two seconds to turn ANC on or off.
2 You can further customize ANC in the BackBeat app by chooosing:
Low: recommended for office
High: recommended for airplane
Customize your audio and cycle through the EQ modes by tapping the EQ button. You can also
change the EQ thru the BackBeat app.
Balanced (default) Tune frequencies to sound best across multiple genres of music with balanced
lows, mids and highs.
Bright Boost treble frequencies to enhance the detail and clarity of music and make speech-based
content more intelligible.
Most headsets are found under car seats, in pockets or on a messy desk. For less obvious
locations, locate your headset by sending a tone to find it.
1 Download the BackBeat app by visiting the Apple Store, Google Play or plantronics.com/software.
2 Locate your lost headset by using Find MyHeadset within the app.
Make/Take/End Calls
Mute
ANC
Set EQ
Find your headset
6
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
Plantronics B.V.
345 Encinal Street
Santa Cruz, CA 95060
United States
Scorpius 171
2132 LR Hoofddorp
Netherlands
©
2018 Plantronics, Inc. BackBeat and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries, and Plantronics Hub is a
trademark of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other
trademarks are the property of their respective owners.
Patents pending.
212987-06 (08.18)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Plantronics Backbeat Go 810 series Owner's manual

Category
Headphone/headset accessories
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI