Plantronics BackBeat GO 810 Owner's manual

Brand: Plantronics

Model: BackBeat GO 810

Category: Headphone/headset accessories

Type: Owner's manual

This manual is also suitable for

Backbeat Go 810 series

Plantronics BackBeat GO 810 wireless headphones offer up to 28 hours of listening time, with Active Noise Cancelling (ANC) to reduce external noise and enhance your music. Easily pair your headphones with your smartphone or Mac, and control your music, calls, and voice assistant with simple button controls. The BackBeat app lets you customize your EQ settings and locate your headphones if they're lost.

BackBeat GO 810 Series

User Guide

Contents

Pair 3

Get Paired 3

Pair second device 3

Pair to Mac 3

Charge 4

The basics 5

Headset overview 5

Power on/off 5

Play/pause music 5

Track selection 5

Activate voice assistant 5

Make/Take/End Calls 6

Mute 6

ANC 6

Set EQ 6

Find your headset 6

Support 7

The ﬁrst time you power on your headphones, the pairing process begins.

1 Slide the power switch on. You hear "pairing" and the LEDs flash red and white.

2 Activate Bluetooth

on your phone and set it to search for new devices.

• iPhone Settings > Bluetooth > On*

• Android Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.

3 Select “PLT BBGO800 Series.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.

1 Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and white.

2 Select “PLT BBGO800 Series” in your device's Bluetooth Settings.

If your Mac is Bluetooth enabled, you can pair your headset to it.

1 Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). You

will hear "pairing" and the LEDs will flash red and blue.

2 On your Mac, choose Apple menu > System Preferences > Bluetooth.

Click Set Up New Device or "+", select "PLT BBGO800 series stereo" and follow the onscreen

instructions.

Pair

Get Paired

Pair second device

Pair to Mac

It takes up to 120 minutes to fully charge your headset. The LEDs turn off once charging is

complete.

TIP

To check the headset battery status, press the Power/Bluetooth button while wearing your

headset. The headset must be in an idle state.

Your headset has up to 22 hours of listening time with ANC on and 28 hours with ANC off.

Charge

ANC

Active Noise Cancelling

:02

Siri

Google Now

™

ANC Active Noise Cancelling

Volume up

Volume down

Track forward

Play/pause music

Track backward

Call button

Siri, Google

Now

Voice-enabled assistant

Bluetooth pair button

Power on/off

Headset LEDs

Mute/unmute

EQ settings

Slide the switch to power on or off.

Tap the Play/pause button.

Tap the Forward button or Back button to control the track selection.

If your smartphone has a voice-enabled assistant, press and hold the Play/pause button for 2

seconds and wait for the phone prompt.

The basics

Headset overview

Power on/off

Play/pause music

Track selection

Activate voice assistant

Answer or end a call

Tap the Play/pause button.

Decline a call

Press and hold the Play/pause button for 2 seconds.

Call back last call (smartphone)

To dial the last number you dialed, double-tap the Play/pause button.

While on an active call, tap the EQ/Mute button.

Active Noise Canceling (ANC) reduces external noise and enhances your music and sound quality.

1 Press and hold the volume up and down buttons for two seconds to turn ANC on or off.

2 You can further customize ANC in the BackBeat app by chooosing:

• Low: recommended for office

• High: recommended for airplane

Customize your audio and cycle through the EQ modes by tapping the EQ button. You can also

change the EQ thru the BackBeat app.

• Balanced (default) Tune frequencies to sound best across multiple genres of music with balanced

lows, mids and highs.

• Bright Boost treble frequencies to enhance the detail and clarity of music and make speech-based

content more intelligible.

Most headsets are found under car seats, in pockets or on a messy desk. For less obvious

locations, locate your headset by sending a tone to find it.

1 Download the BackBeat app by visiting the Apple Store, Google Play or plantronics.com/software.

2 Locate your lost headset by using Find MyHeadset within the app.

Make/Take/End Calls

Mute

ANC

Set EQ

Find your headset

Support

NEED MORE HELP?

plantronics.com/support

Plantronics, Inc.

Plantronics B.V.

345 Encinal Street

Santa Cruz, CA 95060

United States

Scorpius 171

2132 LR Hoofddorp

Netherlands

2018 Plantronics, Inc. BackBeat and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries, and Plantronics Hub is a

trademark of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other

trademarks are the property of their respective owners.

Patents pending.

212987-06 (08.18)