Schlage NDEB Retrofit Kit Installation guide

  • Hello! I've reviewed the Schlage NDEB Retrofit Kit Installation Summary. This document provides detailed instructions on how to install the NDEB lock, including proper door preparation using a template and necessary steps for re-commissioning using ENGAGE. I'm ready to help with any specific questions you may have about the installation process.
  • What should be done with existing NDE80 lock prior installation?
    What template should be used to prepare the door?
    What is required to do with retrofitted NDEB lock after installation?
    What is best practice for re-commissioning?
NDEB Retrofit Kit Installation Summary
Completely remove the existing NDE80 lock from the door -This will prevent any debris from the new
installation process from entering and damaging any portion of the NDE80 lock to be reinstalled
NDE-Series, NDEB Model Door Preparation Template (P519-092) is included with the NDEB Retrofit Kit
and should be used to add the required Door Position Switch holes
NDEB Wireless Lock Installation Instructions (P519-087) are included with the NDEB Retrofit Kit and
should be followed for the installation process
All NDEB Retrofit Locks MUST be re-commissioned using ENGAGE. Ensure the latest version of
ENGAGE is used for the re-commission process.
Best practice is to delete the original NDE80 lock in ENGAGE and then FDR the new NDEB and re-commission
/