Asus B760M-E D4 TUF Gaming Motherboard User manual

Brand: Asus

Model: B760M-E D4 TUF Gaming Motherboard

Category: Motherboards

Type: User manual

This manual is also suitable for

TUF GAMING B760M-E D4

Motherboard

TUF GAMING

B760M-E D4

E21678

First Edition

February 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Safety information ...................................................................................................... iv

About this guide .......................................................................................................... v

Package contents ....................................................................................................... vi

TUF GAMING B760M-E D4 specications summary ............................................... vi

Chapter 1: Product Introduction

1.1 Before you proceed ...................................................................................... 1-1

1.2 Motherboard overview ................................................................................. 1-2

1.3 Central Processing Unit (CPU) .................................................................... 1-9

1.4 System memory .......................................................................................... 1-11

1.5 M.2 installation ............................................................................................ 1-13

Chapter 2: BIOS and RAID Support

2.1 Knowing BIOS ............................................................................................... 2-1

2.2 BIOS Setup program .................................................................................... 2-2

2.3 ASUS EZ Flash 3 ........................................................................................... 2-3

2.4 ASUS CrashFree BIOS 3 .............................................................................. 2-4

2.5 RAID congurations ..................................................................................... 2-5

Appendix

Notices ..................................................................................................................... A-1

Warranty ................................................................................................................... A-6

ASUS contact information ...................................................................................... A-8

Service and Support ............................................................................................... A-8

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

• When adding or removing devices to or from the system, ensure that the power cables

for the devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure that all power

cables are unplugged.

• Seek professional assistance before using an adapter or extension cord. These devices

could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you are not

sure about the voltage of the electrical outlet you are using, contact your local power

company.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied service

technician or your retailer.

Operation safety

• Before installing the motherboard and adding components, carefully read all the manuals

that came with the package.

• Before using the product, ensure all cables are correctly connected and the power cables

are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area

where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualied service

technician or your retailer.

• Your motherboard should only be used in environments with ambient temperatures

between 0°C and 40°C.

Button/Coin Batteries Safety Information

WARNING

KEEP OUT OF REACH OF CHILDREN

Swallowing can lead to chemical burns,

perforation of soft tissue, and death.

Severe burns can occur within 2 hours

of ingestion. Seek medical attention

immediately.

About this guide

This user guide contains the information you need when installing and conguring the

motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product Introduction

This chapter describes the features of the motherboard and the new technology it

supports. It includes descriptions of the switches, jumpers, and connectors on the

motherboard.

• Chapter 2: BIOS and RAID Support

This chapter tells how to boot into the BIOS, upgrade BIOS using the EZ Flash Utility

and support on RAID.

Where to nd more information

Refer to the following sources for additional information and for product and software

updates.

1. ASUS website

The ASUS website (www.asus.com) provides updated information on ASUS hardware

and software products.

2. Optional documentation

Your product package may include optional documentation, such as warranty flyers,

that may have been added by your dealer. These documents are not part of the

standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this user guide.

CAUTION: Information to prevent damage to the components and injuries to

yourself when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

TUF GAMING B760M-E D4 specications summary

CPU

Intel® Socket LGA1700 for 13th Gen Intel® Core™ & 12th Gen Intel® Core™,

Pentium® Gold and Celeron® Processors*

Supports Intel® Turbo Boost Technology 2.0 and Intel® Turbo Boost Max

Technology 3.0**

* Refer to www.asus.com for CPU support list.

** Intel® Turbo Boost Max Technology 3.0 support depends on the CPU types.

Chipset Intel® B760 Chipset

Memory

4 x DIMM slots, Max. 128GB, DDR4 Non-ECC, Un-buffered Memory*

Dual Channel Memory Architecture

Supports Intel® Extreme Memory Prole (XMP)

OptiMem II

* Supported memory types, data rate (Speed), and number of DRAM modules vary

depending on the CPU and memory conguration, for more information please

refer to CPU/Memory Support list under the Support tab of product information

site or visit https://www.asus.com/support/.

Graphics

1 x DisplayPort**

1 x HDMI™ port***

* Graphics specications may vary between CPU types. Please refer to

www.intel.com for any updates.

** Supports 4K@60Hz as specied in DisplayPort 1.4.

*** Supports 4K@60Hz as specied in HDMI™ 2.1.

Expansion Slots

Intel® 13th & 12th Gen Processors

1 x PCIe 4.0 x16 slot

Intel® B760 Chipset

1 x PCIe 4.0 x16 slot (supports x4 mode)

1 x PCIe 4.0 x1 slot

Note: To ensure compatibility of the device installed, please refer to

https://www.asus.com/support/ for the list of supported peripherals.

(continued on the next page)

Package contents

Check your motherboard package for the following items.

Motherboard 1 x TUF GAMING B760M-E D4 motherboard

Cables 2 x SATA 6Gb/s cables

Miscellaneous

1 x I/O Shield

1 x M.2 Rubber package

1 x M.2 SSD screw package

1 x TUF Gaming sticker

Documentation 1 x TUF Certication card

1 x User guide

If any of the above items is damaged or missing, contact your retailer.

vii

TUF GAMING B760M-E D4 specications summary

Storage

Total supports 2 x M.2 slots and 4 x SATA 6Gb/s ports*

Intel® 13th & 12th Gen Processors

M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

Intel® B760 Chipset

M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

4 x SATA 6Gb/s ports

* Intel® Rapid Storage Technology supports SATA RAID 0/1/5/10.

Ethernet 1 x Realtek 2.5Gb Ethernet

TUF LANGuard

Wireless & Bluetooth®Vertical M.2 slot only (Key E, CNVi & PCIe)*

* Wi-Fi module is sold separately.

USB

Rear USB (Total 6 ports)

2 x USB 3.2 Gen 2 ports (2 x Type-A)

2 x USB 3.2 Gen 1 ports (2 x Type-A)*

2 x USB 2.0 ports (2 x Type-A)

Front USB (Total 7 ports)

1 x USB 3.2 Gen 2 connector (supports USB Type-C®)

1 x USB 3.2 Gen 1 header supports 2 additional USB 3.2 Gen 1 ports*

2 x USB 2.0 headers support 4 additional USB 2.0 ports

* U32G1_E1 port, U32G1_E2 port, U32G1_E3 port and U32G1_E4 port share the

bandwidth.

Audio

Realtek 7.1 Surround Sound High Denition Audio CODEC*

- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking

- Supports up to 24-Bit/192 kHz playback

Audio Features

- Audio Shielding

- Premium audio capacitors

- Dedicated audio PCB layers

* A chassis with an HD audio module in the front panel is required to support 7.1

Surround Sound audio output.

Back Panel I/O Ports

2 x USB 3.2 Gen 2 ports (2 x Type-A)

2 x USB 3.2 Gen 1 ports (2 x Type-A)

2 x USB 2.0 ports (2 x Type-A)

1 x DisplayPort

1 x HDMI™ port

1 x Vertical M.2 slot (Key E)

1 x Realtek 2.5Gb Ethernet port

3 x Audio jacks

1 x PS/2 Keyboard/Mouse combo port

Internal I/O

Connectors

Fan and Cooling related

1 x 4-pin CPU Fan header

1 x 4-pin CPU OPT Fan header

2 x 4-pin Chassis Fan headers

(continued on the next page)

viii

TUF GAMING B760M-E D4 specications summary

Internal I/O

Connectors

Power related

1 x 24-pin Main Power connector

1 x 8-pin +12V Power connector

1 x 4-pin +12V Power connector

Storage related

2 x M.2 slots (Key M)

4 x SATA 6Gb/s ports

USB

1 x USB 3.2 Gen 2 connector (supports USB Type-C®)

1 x USB 3.2 Gen 1 header supports 2 additional USB 3.2 Gen 1 ports

2 x USB 2.0 headers support 4 additional USB 2.0 ports

Miscellaneous

3 x Addressable Gen 2 headers

1 x Aura RGB header

1 x Clear CMOS header

1 x COM Port header

1 x Front Panel Audio header (AAFP)

1 x S/PDIF Out header

1 x 20-3 pin System Panel header with Chassis intrude function

Special Features

ASUS TUF PROTECTION

- DIGI+ VRM (- Digital power design with DrMOS)

- ESD Guards

- TUF LANGuard

- Overvoltage Protection

- SafeSlot Core+

- Stainless-Steel Back I/O

ASUS Q-Design

- M.2 Q-Latch

- Q-DIMM

- Q-LED (CPU [red], DRAM [yellow], VGA [white], Boot Device [yellow

green])

- Q-Slot

ASUS Thermal Solution

- Flexible M.2 heatsink

- VRM heatsink design

ASUS EZ DIY

- ProCool

- SafeDIMM

Aura Sync

- Aura RGB header

- Addressable Gen 2 headers

(continued on the next page)

TUF GAMING B760M-E D4 specications summary

Software Features

ASUS Exclusive Software

Armoury Crate

- Aura Creator

- Aura Sync

- Fan Xpert 2+

- Power Saving

- Two-Way AI Noise Cancelation

AI Suite 3

- DIGI+ VRM

- PC Cleaner

TUF GAMING CPU-Z

DTS Audio Processing

Norton 360 for Gamers (60 Days Free Trial)

WinRAR

UEFI BIOS

ASUS EZ DIY

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 3

- ASUS UEFI BIOS EZ Mode

BIOS 128 Mb Flash ROM, UEFI AMI BIOS

Manageability WOL by PME, PXE

Operating System Windows® 11, Windows® 10 64-bit

Form Factor mATX Form Factor

9.6 inch x 9.6 inch (24.4 cm x 24.4 cm)

• Specifications are subject to change without notice. Please refer to the ASUS website

for the latest specifications.

• For more information on downloading and installing drivers and utilities for your

motherboard, please scan the QR code below:

1-1

TUF GAMING B760M-E D4

Product Introduction

1.1 Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due

to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so

may cause severe damage to the motherboard, peripherals, or components.

• The pin definitions in this chapter are for reference only. The pin names depend on the

location of the header/jumper/connector.

• For more information on installing your motherboard, please scan the QR code below:

Chapter 1: Product Introduction

1-2

1.2.1 Layout contents

1. CPU socket

The motherboard comes with a LGA1700 socket designed for 13th Gen Intel® Core™ & 12th

Gen Intel® Core™, Pentium® Gold and Celeron® Processors.

For more details, refer to Central Processing Unit (CPU).

2. DDR4 DIMM slots

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4

(Double Data Rate 4) memory modules.

For more details, refer to System memory.

3. Expansion slots

This motherboard supports two PCIe x16 graphics cards and one PCIe 4.0 x1 network card,

SCSI card or other card that complies with the PCI Express specication.

Chapter 1: Product Introduction

1.2 Motherboard overview

DDR4 DIMM_A1 (64bit, 288-pin module)

DDR4 DIMM_A2 (64bit, 288-pin module)

DDR4 DIMM_B1 (64bit, 288-pin module)

1st

DDR4 DIMM_B2 (64bit, 288-pin module)

DIGI+

VRM

CPU_FAN

CPU_OPT

CHA_FAN1

COM_DEBUG

CHA_FAN2

SPDIF_OUT

ADD GEN 2_3

ADD GEN 2_2 PANEL

AAFP CLRTC

SATA6G_1 SATA6G_2

SATA6G_3 SATA6G_4

128Mb

BIOS

ATX_12V_1

ATX_12V_2

ATX_PWR

U32G2_C3

U32G1_E34

BATTERY

LAN_U32G1_E12

Ethernet

Super

I/O

PCIEX1(G4)

M.2_1(SOCKET3)

M.2_2(SOCKET3)

2280 2260 2242

AURA

228022602242

PCIEX16(G4)_2

PCIEX16(G4)_1

USB_910USB_78

COM

24.4cm(9.6in)

Intel®

B760

M.2_1(SOCKET3)

PCIE SATA

4.0 X4 X

M.2_2(SOCKET3)

PCIE SATA

4.0 X4 X

CPU

DRAM

VGA

BOOT

Audio

CODEC

ADD GEN 2_1

RGB_HEADER

LGA1700

AUDIO

KBMS_USB_56

U32G2_12

M.2(WIFI)

HDMI

_DP

41415 16

5 16 24

7 1710

1112

1113

Unplug the power cord before installing or removing the motherboard. Failure to do so can

cause you physical injury and damage motherboard components.

1-3

4. Fan headers

The Fan headers allow you to connect fans to cool the system.

Header Max.

Current Max. Power Default Speed Shared

Control

CPU_FAN 1A 12W Q-Fan Controlled A

CPU_OPT 1A 12W Q-Fan Controlled A

CHA_FAN1 1A 12W Q-Fan Controlled -

CHA_FAN2 1A 12W Q-Fan Controlled -

5. Power connectors

These Power connectors allow you to connect your motherboard to a power supply. The

power supply plugs are designed to t in only one orientation. Find the proper orientation and

push down rmly until the power supply plugs are fully inserted.

Ensure to connect the 8-pin power plug or connect both the 8-pin and 4-pin power plugs.

• We recommend that you use a PSU with a higher power output when conguring a

system with more power-consuming devices. The system may become unstable or

may not boot up if the power is inadequate.

• If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power

or above to ensure the system stability.

6. M.2 slots (Key M)

The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.

• Intel® 13th & 12th Gen Processors

M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

• Intel® B760 Chipset

M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

The M.2 SSD module is purchased separately.

7. SATA 6Gb/s ports

The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and

hard disk drives via SATA cables.

8. USB 3.2 Gen 2 Type-C® Front Panel connector

The USB 3.2 Gen 2 Type-C® connector allows you to connect a USB

3.2 Gen 2 Type-C® module for an additional USB 3.2 Gen 2 Type-C®

port on the front panel. The USB 3.2 Gen 2 Type-C® connector provides

data transfer speeds of up to 10 Gb/s.

The USB 3.2 Gen 2 Type-C® module is purchased separately.

FAN PWM

FAN IN

FAN PWR

GND

FAN PWR

FAN IN

FAN PWM

FAN IN

FAN PWR

GND

FAN PWR

FAN IN

FAN PWM

CC1

VBUS

RX1-

RX1+

GND

TX1-

TX1+

VBUS

TX2+

TX2-

GND

RX2+

RX2-

GND

D-

D+

CC2

U32G2_C3

TUF GAMING B760M-E D4

1-4

9. USB 3.2 Gen 1 header

The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen

1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1

header provides data transfer speeds of up to 5 Gb/s.

The USB 3.2 Gen 1 module is purchased separately.

10. USB 2.0 headers

The USB 2.0 headers allow you to connect USB modules for

additional USB 2.0 ports. The USB 2.0 headers provide data

transfer speeds of up to 480 Mb/s.

DO NOT connect a 1394 cable to the USB connectors.

Doing so will damage the motherboard!

The USB 2.0 module is purchased separately.

11. Addressable Gen 2 headers

The Addressable Gen 2 headers allow you to connect individually addressable

RGB WS2812B LED strips or WS2812B based LED strips.

The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/

Ground), with a maximum power rating of 3A (5V), and the addressable headers on this

board can handle a combined maximum of 500 LEDs.

Before you install or remove any component, ensure that the power supply is switched off

or the power cord is detached from the power supply. Failure to do so may cause severe

damage to the motherboard, peripherals, or components.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the addressable RGB LED strip is

connected in the correct orientation, and the 5V connector is aligned with the 5V

header on the motherboard.

• The addressable RGB LED strip will only light up when the system is powered on.

• The addressable RGB LED strip is purchased separately.

12. Aura RGB header

The Aura RGB header allows you to connect RGB LED strips.

The Aura RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a

maximum power rating of 3A (12V).

Before you install or remove any component, ensure that the ATX power supply is switched

off or the power cord is detached from the power supply. Failure to do so may cause severe

damage to the motherboard, peripherals, or components.

USB3+5V

IntA_E3_SSRX-

IntA_E3_SSRX+

GND

IntA_E3_SSTX-

IntA_E3_SSTX+

GND

IntA_E3_D-

IntA_E3_D+

GND

PIN 1

USB3+5V

IntA_E4_SSRX-

IntA_E4_SSRX+

GND

IntA_E4_SSTX-

IntA_E4_SSTX+

GND

IntA_E4_D-

IntA_E4_D+

U32G1_E34

USB+5V

USB_P7-

USB_P7+

GND

USB+5V

USB_P8-

USB_P8+

GND

PIN 1

USB_78

USB+5V

USB_P9-

USB_P9+

GND

USB+5V

USB_P10-

USB_P10+

GND

PIN 1

USB_910

ADD_GEN 2

+5V

Data

Ground

PIN 1

Chapter 1: Product Introduction

1-5

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the RGB LED extension cable and the

RGB LED strip are connected in the correct orientation, and the 12V connector is

aligned with the 12V header on the motherboard.

• The LED strip will only light up when the system is powered on.

• The LED strip is purchased separately.

13. Clear CMOS header

The Clear CMOS header allows you to clear the Real Time Clock (RTC) RAM in

the CMOS, which contains the date, time, system passwords, and system setup

parameters.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup to

re-enter data.

DO NOT short-circuit the pins except when clearing the RTC RAM. Short-circuiting or

placing a jumper cap will cause system boot failure!

If the steps above do not help, remove the onboard button cell battery and short the two

pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the button

cell battery.

14. COM Port header

This header is for a serial (COM) port. Connect the serial port module cable to

this header, then install the module to a slot opening at the back of the system

chassis.

15. Front Panel Audio header

The Front Panel Audio header is for a chassis-mounted front panel audio

I/O module that supports HD Audio. Connect one end of the front panel

audio I/O module cable to this header.

We recommend that you connect a high-denition front panel audio

module to this header to avail of the motherboard’s high-denition

audio capability.

16. S/PDIF Out header

This header is for an additional Sony/Philips Digital Interface (S/PDIF) port.

Connect the S/PDIF Out module cable to this header, then install the module to

a slot opening at the back of the system chassis.

CLRTC

+3V_BAT

GND

PIN 1

COM

DCD

TXD

GND

RTS

RXD

DTR

DSR

CTS

AAFP

AGND

SENSE1_RETUR

SENSE2_RETUR

PORT1 L

PORT1 R

PORT2 R

SENSE_SEND

PORT2 L

HD-audio-compliant

pin definition

SPDIF_OUT

+5V

SPDIFOUT

GND

TUF GAMING B760M-E D4

1-6

17. System Panel header

This header supports several chassis-mounted functions.

• System Power LED header (PLED)

The 2-pin and/or 3-1 pin headers allow you to connect the

System Power LED. The System Power LED lights up when

the system is connected to a power source, or when you

turn on the system power, and blinks when the system is in

sleep mode.

• Storage Device Activity LED header (HDD_LED)

The 2-pin header allows you to connect the Storage Device Activity LED. The Storage

Device Activity LED lights up or blinks when data is read from or written to the storage

device or storage device add-on card.

• System Warning Speaker header (SPEAKER)

The 4-pin header allows you to connect the chassis-mounted system warning speaker.

The speaker allows you to hear system beeps and warnings.

• Power Button/Soft-off Button header (PWRSW)

The 2-pin header allows you to connect the system power button. Press the power

button to power up the system, or put the system into sleep or soft-off mode

(depending on the operating system settings).

• Reset button header (RESET)

The 2-pin header allows you to connect the chassis-mounted reset button. Press the

reset button to reboot the system.

• Chassis intrusion header (CHASSIS)

The 2-pin header allows you to connect the chassis-mounted intrusion detection

sensor or switch. The chassis intrusion sensor or switch sends a high-level signal

to the header when a chassis component is removed or replaced, the signal is then

generated as a chassis intrusion event.

18. Q-LEDs

The Q-LEDs check key components (CPU, DRAM, VGA, and booting devices) during the

motherboard booting process. If an error is found, the critical component’s LED stays lit up

until the problem is solved.

The Q-LEDs provide the most probable cause of an error code as a starting point for

troubleshooting. The actual cause may vary from case to case.

Chapter 1: Product Introduction

1-7

1.2.2 Rear panel connectors

9 10 11

3 4 5

1. DisplayPort. This port is for a DisplayPort-compatible device.

2. PS/2 Keyboard/Mouse combo port. This port is for a PS/2 keyboard or mouse.

3. 2.5Gb Ethernet port. This port allows 2.5Gbps Ethernet connection to a Local Area

Network (LAN) through a network hub. Refer to the table below for the Ethernet port

LED indications.

Realtek 2.5Gb Ethernet port LED indications

Speed LED

Status Description

OFF No link

GREEN 2.5 Gbps connection

ORANGE 1 Gbps / 100 Mbps /

10 Mbps connection

Activity Link LED

Status Description

OFF No link

GREEN Linked

BLINKING Data activity

ACT/LINK

LED

SPEED

LED

Ethernet port

4. Line In port (light blue). This port connects the tape, CD, DVD player, or other audio

sources.

5. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel,

5.1-channel, and 7.1-channel congurations, the function of this port becomes Front

Speaker Out.

6. HDMI™ port. This port is for a High-Denition Multimedia Interface (HDMI™)

connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other

protected content.

7. USB 2.0 ports. These Universal Serial Bus (USB) ports are for USB 2.0 devices.

8. USB 3.2 Gen 2 (up to 10Gbps) ports (teal blue, Type A). These Universal Serial Bus

3.2 (USB 3.2) ports are for USB 3.2 Gen 2 devices.

9. USB 3.2 Gen 1 (up to 5Gbps) ports. These Universal Serial Bus (USB) ports connect

to USB 3.2 Gen 1 devices.

TUF GAMING B760M-E D4

1-8

10. Vertical M.2 slot (Key E). The vertical M.2 slot (Key E) allows you to install an M.2

Wi-Fi module.

The M.2 Wi-Fi module is purchased separately.

11. Microphone port (pink). This port connects a microphone.

Refer to the audio conguration table below for the function of the audio ports in 2, 4, 5.1,

or 7.1-channel conguration.

Audio 2, 4, 5.1 or 7.1-channel conguration

Port 2-channel 4-channel 5.1-channel 7.1-channel

Light Blue

(Rear panel) -Rear Speaker

Out

Rear Speaker

Out

Rear Speaker

Out

Lime

(Rear panel)

Front Speaker

Out

Front Speaker

Out

Front Speaker

Out

Front Speaker

Out

Pink

(Rear panel) - - Center/Subwoofer Center/Subwoofer

Lime

(Front panel) - - - Side Speaker Out

Pink

(Front panel) ----

To configure a 7.1-channel audio output:

Use a chassis with HD audio module in the front panel to support a 7.1-channel audio

output.

Chapter 1: Product Introduction

1-9

1.3 Central Processing Unit (CPU)

This motherboard comes with a LGA1700 socket designed for 13th Gen

Intel® Core™ &12th Gen Intel® Core™, Pentium® Gold and Celeron®

Processors.

Unplug all power cables before installing the CPU.

• Ensure that you install the correct CPU designed for LGA1700 socket only. DO NOT

install a CPU designed for LGA1155, LGA1156, LGA1151, and LGA1200 sockets on

the LGA1700 socket.

• ASUS will not cover damages resulting from incorrect CPU installation/removal,

incorrect CPU orientation/placement, or other damages resulting from negligence by

the user.

Installing the CPU

Take caution when lifting the load

lever, ensure to hold onto the load

lever when releasing the load

lever. Letting go of the load lever

immediately after releasing it may

cause the load lever to spring

back and cause damage to your

motherboard.

TUF GAMING B760M-E D4

1-10 Chapter 1: Product Introduction

Page is loading ...

Asus B760M-E D4 TUF Gaming Motherboard User manual

Brand: Asus

Model: B760M-E D4 TUF Gaming Motherboard

Category: Motherboards

Type: User manual

This manual is also suitable for

TUF GAMING B760M-E D4

Download PDF

report

in other languages

română: Asus B760M-E D4 TUF Gaming Motherboard Manual de utilizare

Asus B760M-E D4 TUF Gaming Motherboard User manual

This manual is also suitable for

Asus B760M-E D4 TUF Gaming Motherboard User manual

in other languages

Related papers

Other documents