Meyer Single Screw Formula Mixer Owner's manual

6990633 (1-13) Printed in U.S.A. © Bobcat Company 2013

SINGLE SCREW FORMULA MIXER

Models F425 • F510

PB-SSM

Owner / Operator’s Manual

Starting Model Year 2017

6 / 2018

Meyer Manufacturing Corporation - 2 -

1.0 IMPORTANT INFORMATION

The mixer serial number plate is located on the left hand side of the mixing tub. The trailer serial number plate is located

on the left hand side of the trailer hitch. Please enter the model, serial number and additional information in the space

provided for future reference.

Always use your serial number when requesting information or when ordering parts.

HOW TO READ YOUR SERIAL NUMBER

Meyer Manufacturing Corporation

674 W. Business Cty Rd A

Dorchester, WI 54425

Phone: 1-800-325-9103

Fax: 715-654-5513

Email: sales@meyermfg.com

Website: www.meyermfg.com

Model No.

Mixer Serial No.

Trailer Serial No.

Date of Purchase

Dealership

Dealership Phone No.

Mixer Body

Serial Number

Trailer Serial Number

MIXER

EXAMPLE: 17VS0425201

17 VS

TRAILER

EXAMPLE: VST17201

Model Year / Vertical Mixer / Model / Sequence Of Build Vertical Mixer / Model Year / Sequence Of Build

0425 201 VST 17 201

1-800-325-9103

PB-SSM - 3 - www.meyermfg.com

2.0 PRE-DELIVERY & DELIVERY CHECK LIST

This Pre-Delivery & Delivery Check List must be gone through by the Selling Party and the Customer to validate the

Owner’s Registration Form.

Meyer Manufacturing Corporation

Phone: 715-654-5132 • Toll-Free: 1-800-325-9103 • P.O. Box 405 • Dorchester, WI 54425

PB Mixer Check List

All shields and guards are in place and securely

fastened.

All PTO shields turn freely.

All bolts and other fasteners are secure and tight.

All mechanisms operate trouble free.

All grease fittings have been lubricated, gear

boxes filled to proper levels, and all roller chains

are oiled. See “Lubrication” section of this

manual.

Cross Conveyor Belt or Chain are at proper

tension. See “Adjustments” section in this

manual.

All decals are in place and legible.

All stop/tail/turn lights work properly.

PRE-DELIVERY CHECK LIST

After the New Meyer Mixer has been completely set-up,

check to be certain it is in correct running order before

delivering it to the customer.

The following is a list of points to inspect:

Check off each item as you have made the proper

adjustments and found the item operating

satisfactorily. Any adjustments made, MUST be

according to specifications defined in this manual.

DELIVERY CHECK LIST

The following check list is an important reminder of

valuable information that MUST be passed on to the

customer at the time the unit is delivered.

Check off each item as you explain it to the

customer.

Explain to the customer that pre-delivery check

list was fully completed.

Give customer the Owner & Operator’s Manual.

Instruct to read and completely understand its

contents BEFORE attempting to operate the

mixer.

Explain and review with customer the New Meyer

mixer manufacturer’s warranty.

Show the customer where to find the serial

number on the implement.

Explain and review with the customer “Safety

Precautions” section of this manual.

Explain and review with customer the proper

“Start-up and Operating Procedures” sections of

this manual.

Explain and review with customer the

recommended loading and unloading

procedures.

Demonstrate the start-up and shutdown controls,

proper hydraulic hose storage and tip holder used

to keep system clean from contaminants.

Explain the importance of cross conveyor chain

or belt tension, and the need to watch and tighten

during the break-in period.

Explain that regular lubrication and proper

adjustments are required for continued proper

operation and long life of the mixer. Review with

the customer the “Lubrication” and “Adjustments”

sections of this manual.

Fully complete this “PRE-DELIVERY &

DELIVERY CHECK LIST” with the customer.

Meyer Manufacturing Corporation - 4 - PB-SSM

Meyer Manufacturing Corporation

674 W. Business Cty Rd A

Dorchester, WI 54425

Phone: 1-800-325-9103

Fax: 715-654-5513

Email: sales@meyermfg.com

Website: www.meyermfg.com

1-800-325-9103

PB-SSM - 5 - www.meyermfg.com

3.0 INTRODUCTION

Congratulations on your purchase of a new Meyer farm equipment product. Undoubtedly you have given

much consideration to your purchase and we’re proud that you have selected Meyer. Pride in craftsmanship,

engineering and customer service have made Meyer products the finest in the farm equipment industry today.

There is no substitute for quality. That is why thousands of people like you have purchased Meyer farm

equipment. They felt it was the best equipment to serve their farming needs, now and in years to come. We

ask that you follow our policy of “safety first”, and we strongly suggest that you read through the Operator’s

& Parts manual before operating your Meyer farm equipment. Meyer Manufacturing Corporation wants to

thank you for not compromising quality. We are determined to offer excellence in customer service as well as

provide you with the very best value for your dollar.

Sincerely,

All Employees of

MEYER MANUFACTURING CORPORATION

When the PTO is referred to, it means power takeoff from the tractor.

The formula mixer may be referred to as mixer, implement, equipment or machine in this manual.

Manufacturer’s Statement: Meyer Manufacturing Corporation reserves the right to make improvements in design, or

changes in specifications at any time, without incurring any obligation to owners of units previously sold. This supersedes

all previous published instructions.

IMPORTANT: You are urged to study this manual and follow the instructions carefully. Your efforts will be

repaid in better operation and service as well as a savings in time and repair expense. Failure to read this

manual and understand the machine could lead to serious injury. If you do not understand instructions in

this manual, contact either your dealer or Meyer Manufacturing Corp. at Dorchester, WI 54425.

WARRANTY: At the front of this manual is the Owner’s Registration Form. Be sure your dealer has

completed this form and promptly forwarded a copy to Meyer Manufacturing to validate the

manufacturer’s warranty. The product model and serial number are recorded on this form and on the

inside of the front cover for proper identification of your Meyer equipment by your dealer and the

manufacturer when ordering repair parts. The Mixer body serial number plate is located on the left hand

side of the mixing tub. The Trailer serial number plate is located on the left hand side of the trailer hitch.

Meyer Manufacturing Corporation - 6 - PB-SSM

1-800-325-9103

PB-SSM - 7 - www.meyermfg.com

TABLE OF CONTENTS

1.0 IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.0 PRE-DELIVERY & DELIVERY CHECK LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4.0 MANUFACTURER’S WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.0 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

5.1 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5.2 SAFETY SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

5.3 SHUTOFF & LOCKOUT POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.3.1 Shutoff & Lockout Power Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6.0 PRE-OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6.1 PRODUCT INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6.1.1 General Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.1.2 Before Loading The Formula Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.2 LIGHT HOOK-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

6.3 HYDRAULIC HOOK-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

6.4 PTO DRIVELINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

6.4.1 Drawbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

6.4.2 Shear Bolt PTO, Primary (F425/F510) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.5 HITCHING TO TRACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.5.1 Jack Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.6 START-UP AND SHUT-DOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.6.1 Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

6.6.2 Shut-Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

6.7 TRANSPORTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.7.1 Safety Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6.7.2 Tire / Wheel Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

6.7.3 Brake Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

6.7.4 Tractor Towing Size Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

6.8 OPTIONAL EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

7.0 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

7.1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

7.1.1 Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Meyer Manufacturing Corporation - 8 - PB-SSM

7.2 LOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

7.2.1 Loading Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

7.3 MIXING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

7.4 PLATFORM OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

7.5 FOLDING LADDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

7.6 UNLOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

7.7 UNHOOKING THE TRACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

7.9 HAY STOP ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

7.9.1 Hay Stop Lock Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

7.10 MIXER TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

8.0 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

8.1 LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

8.1.1 Daily or every 8-10 loads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

8.1.2 Weekly: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

8.1.3 Monthly: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

8.1.4 Every 40 hours: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

8.1.5 50 hours: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

8.1.6 Annually (1500 hours): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

8.1.7 Gearbox Oil Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

8.1.7.1 Planetary Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

8.2 ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

8.2.1 Side Discharge Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

8.2.2 Front Discharge Conveyor - Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

8.2.2.1 Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

8.2.3 Front Discharge Conveyor - Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

8.2.4 Auger Scraper Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

8.2.5 Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

8.2.5.1 Knife Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

8.2.5.2 Adding Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

8.2.5.3 Knife Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

8.2.5.4 Knife Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

8.2.5.5 Replacing Damaged or Worn Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

8.3 STORING THE MIXER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

8.4 RETURNING THE MIXER TO SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

8.5 REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

8.5.1 Shutoff & Lockout Power Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

9.0 PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

1-800-325-9103

PB-SSM - 9 - www.meyermfg.com

WEIGH BAR WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

TRAILER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

HUB ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

MIXER BODY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

FRONT FLAT & INCLINE BASE BELT CONVEYOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

FRONT FLAT BELT CONVEYOR HYDRAULIC SCHEMATIC . . . . . . . . . . . . . . . . . . . . . . . . 72

FRONT INCLINE BELT CONVEYOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

FRONT INCLINE BELT CONVEYOR HYDRAULIC SCHEMATIC . . . . . . . . . . . . . . . . . . . . . 78

FRONT INCLINE BELT CONVEYOR STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

FRONT FLAT & INCLINE BASE CHAIN CONVEYOR ASSEMBLY . . . . . . . . . . . . . . . . . . . . 82

FRONT FLAT & FRONT INCLINE CONVEYORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

FRONT DISCHARGE INCLINE CHAIN CONVEYOR HYDRAULIC SCHEMATIC

(36” X 36”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

SIDE DISCHARGE BELT CONVEYOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

SIDE DISCHARGE INCLINE BELT CONVEYOR HYDRAULIC SCHEMATIC

36” X 24 (LEFT & RIGHT DISCHARGE), 36” X 36” (LEFT DISCHARGE), 36” X 48” (LEFT

DISCHARGE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

SIDE DISCHARGE INCLINE CONVEYOR HYDRAULIC SCHEMATIC

36" X 36" (RIGHT DISCHARGE), 36" X 48" (RIGHT DISCHARGE) . . . . . . . . . . . . . . . . . . . . 98

DOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

DOOR HYDRAULIC SCHEMATIC

FRONT / LEFT / RIGHT / DUAL LEFT AND RIGHT DOOR . . . . . . . . . . . . . . . . . . . . . . . . . 102

LADDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

AUGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

DRIVELINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

1860 SERIES PLANETARY (119-1680-24.18-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

PLANETARY OIL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

PTO DRIVE SHAFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

UNIVERSAL JOINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

OPTIONAL EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

HAY RETAINING RING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

8” CAPACITY EXTENSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

TIP OFF

FRONT INCLINE DISCHARGE (CHAIN ONLY) & SIDE DISCHARGE . . . . . . . . . . . . . 120

VIEWING PLATFORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

REMOTE SCALE MOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

RUBBER SIDE DOOR CHUTE ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Meyer Manufacturing Corporation - 10 - PB-SSM

CONVEYOR HANGING MAGNET/WEIGHT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . .128

10.0 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

MODELS F425, F510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

MAINTENANCE RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

1-800-325-9103

PB-SSM - 11 - www.meyermfg.com

4.0 MANUFACTURER’S WARRANTY

MEYER FORMULA MIXER 4/2014

I. The “Owner’s Registration Form” must be completed in full and promptly returned to Meyer Mfg. Corp. for

this warranty to become both valid and effective. All warranties on New Meyer Mixers shall apply only to the

original retail customer from an authorized Meyer Mfg. Corp. dealership.

II. This warranty shall not apply to any Meyer Mixer which has been subjected to misuse, negligence, alteration,

accident, incorrect operating procedures, has been used for an application not designed for or pre-authorized

by Meyer in writing, has had the serial numbers altered, or which shall have been repaired with parts other

than those obtained through Meyer Mfg. Corp. Meyer is not responsible for the following: Depreciation or

damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow the operator's

manual recommendations or normal maintenance parts and service. Meyer is not responsible for rental of

replacement equipment during warranty repairs, damage to a power unit (including but not limited to a truck

or tractor), loss of earnings due to equipment down time, or damage to equipment while in transit to or from

the factory or dealer.

III. Meyer Mfg. Corp. warrants New Meyer Mixer to be free from defects in material and workmanship under

recommended use and maintenance service, as stated in the operator’s and parts manuals, as follows:

A. Meyer Mfg. Corp. will repair or replace F.O.B. Dorchester, WI, as Meyer Mfg. Corp. elects, any

part of a new Meyer Mixer which is defective in material or workmanship:

i. Without charge for either parts or labor during the first (1) year from purchase date to the

original retail customer.

B. In addition to the above basic warranty, Meyer Mfg. Corp. will repair or replace F.O.B.

Dorchester, WI as Meyer Mfg. Corp. elects:

i. Any part of the following which is defective in material or workmanship (not neglect to

recommended use and service) with a “pro-rated” charge for parts only (not labor) during

the stated time period from date of purchase to the original retail customer. 1st year

100%, 2nd year 100%, 3rd year 50%, 4th year 25%, 5th year 10%

a. The Formula Mixer Planetary Gearbox. Meyer Part #'s 119-1680-24.18-1

IV. COMMERCIAL USE: Coverage as in paragraph III.A.i. only, except warranty coverage is for (90) days for parts

and labor to the original commercial retail customer.

V. Repairs eligible for labor warranty must be made by Meyer Mfg. Corp. or an authorized Meyer dealership. The

original retail customer is responsible for any service call and/or transportation of the mixer to the dealership or

the factory for warranty service.

VI. Except as stated above, Meyer Mfg. Corp. shall not be liable for injuries or damages of any kind or nature,

direct, consequential, or contingent, to persons or property. This warranty does not extend to loss of crop or for

any other reasons.

VII. No person is authorized to give any other warranties or to assume any other obligation on Meyer Mfg. Corp.’s.

behalf unless made or assumed in writing by Meyer Mfg. Corp. This warranty is the sole and exclusive warranty

which is applicable in connection with the manufacture and sale of this product and Meyer Mfg. Corp.’s

responsibility is limited accordingly.

Purchased Product Warranty:

This warranty does not apply to component parts not manufactured by Meyer such as but not limited to wheels, tires,

tubes, PTO shafts, clutches, hydraulic cylinders, scales, tarps, etc.

Meyer Manufacturing Corporation - 12 - PB-SSM

1-800-325-9103

PB-SSM - 13 - www.meyermfg.com

5.0 SAFETY

Meyer Mfg. Corp. equipment is manufactured with operator safety in mind. Located on the equipment are various safety

signs to aid in operation and warn of hazardous areas. Pay close attention to all safety signs on the equipment.

Carefully follow the operating and maintenance instructions in this manual and all applicable safety laws. Failure to follow

all safety procedures may result in serious injury or death.

Before attempting to operate this equipment, read and study the following safety information. In addition, make

sure that every individual who operates or works with the equipment, whether family member or employee, is

familiar with these safety precautions.

Meyer Mfg. Corp. provides guards for exposed moving parts for the operator’s protection; however, some areas

cannot be guarded or shielded in order to assure proper operation. The operator’s manual and safety signs on

the equipment itself warn you of hazards and must be read and observed closely!

Danger, Warning, Caution, and instructional decals and plates are placed on the equipment to protect anyone working on

or around this equipment, as well as the components of the equipment. All personnel operating or maintaining this

equipment must familiarize themselves with all Danger, Warning, Caution, and instructional decals and plates.

This symbol is used to call attention to instructions

concerning personal safety. Be sure to observe and

follow these instructions. Take time to be careful!

The signal word DANGER on the machine and in the manual identifies

a hazardous situation which, if not avoided, WILL result in death or

serious injury.

The signal word WARNING on the machine and in the manual

indicates a potentially hazardous situation which, if not avoided,

COULD result in death or serious injury.

The signal word CAUTION on the machine and in the manual

indicates a potentially hazardous situation which, if not avoided, MAY

result in minor or moderate injury. It may also be used to alert against

unsafe practices.

This notice identifies procedures which must be followed to avoid

damage to the machine.

Meyer Manufacturing Corporation - 14 - PB-SSM

5.1 SAFETY PRECAUTIONS

• DO NOT allow anyone to operate, service, inspect or otherwise handle this equipment until all operators have read

and understood all of the instructional materials in this Operator’s And Parts Manual and have been properly trained

in its intended usage.

• For an operator to be qualified, he or she must not use drugs or alcohol which impair alertness or coordination while

working. An operator who is taking prescription drugs must get medical advice to determine if he or she can safely

operate a machine and the equipment.

• Make sure all personnel can READ and UNDERSTAND all safety signs.

• DO NOT allow minors (children) or inexperienced persons to operate this equipment.

• DO NOT operate until all shields and guards are in place and securely fastened.

• DO NOT step up on any part of the equipment that is not designated as a ladder or viewing platform at any time.

• DO NOT adjust, clean or lubricate while the equipment is in motion.

• Inspect when first delivered and regularly thereafter; that all connections and bolts are tight and secure before

operating.

• Know how to stop operation of the equipment before starting it!

• Make certain everyone is clear of the equipment before applying power.

• Keep hands, feet and clothing away from moving parts. Loose or floppy clothing should not be worn by the operator.

• Observe all applicable traffic laws when transporting on public roadways (where legal to do so). Check local laws for

all highway lighting and marking requirements.

• Shut off and lock out power before adjusting, servicing, maintaining or clearing an obstruction from this machine. (See

5.3 SHUTOFF & LOCKOUT POWER on page 24.)

• Always enter curves or drive up or down hills at a low speed and at a gradual steering angle.

• Never allow riders on either tractor / truck or equipment.

• Keep tractor / truck in a lower gear at all times when traveling down steep grades.

• Stay away from overhead power lines. Electrocution can occur without direct contact.

• Use only properly rated undercarriage and tires.

All individuals who will operate this equipment must read

and completely understand this Operator’s And Parts

Manual. Operator must have instructions before operating

the machine. Untrained operators can cause injury or death.

1-800-325-9103

PB-SSM - 15 - www.meyermfg.com

Safety Precautions For Tractor Towed Units:

• Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces.

• Always install a SMV emblem on pull-type equipment when transporting on roadways and keep clean and bright.

• Always yield to oncoming traffic in all situations and move to the side of the road so any following traffic may pass.

Safety Precautions For Truck Mounted Units:

• Comply with state and local laws governing highway safety and movement of machinery on roadways.

Safety Precautions For Hydraulic System:

• Check hydraulic tubes, hoses and fittings for damage and leakage. Never use hands to check for leaks. Hydraulic

tubes and hoses must be properly routed and have adequate support and secure clamps. Tighten or replace any parts

that show leakage.

• Always clean fluid spills. Do not use gasoline or diesel fuel for cleaning parts. Use commercial nonflammable solvents.

Meyer Manufacturing Corporation - 16 - PB-SSM

5.2 SAFETY SIGNS

Read all safety signs on the equipment and in this manual. Keep all

safety signs clean and replace any damaged or missing safety signs

before operating the equipment. Do Not remove any safety signs.

Safety signs are for operator protection and information.

To prevent serious injury or death:

Read and understand owner’s manual

before using. Review safety precautions

annually.

Observe all applicable traffic laws when

transporting on public roadways (where

legal to do so). Check local laws for all

highway lighting and marking requirements.

Securely attach to towing unit. Use a

high strength appropriately sized hitch

pin with a mechanical retainer and

attach safety chain.

Do not exceed the chassis or tire load

rating. Maximum gross weight is the

lesser of the two.

Do not exceed 20 mph (33 kph).

Slow down for corners and rough terrain.

Do not drink and drive.

No riders allowed when transporting.

Before moving running gear, be sure

required lights and reflectors are

installed and working.

Before maintenance or repair, stop

vehicle, set tractor parking brake,

and remove ignition key.

Place safety stands under frame and

chock wheels before working on tires or

running gear.

Maintain wheel bolts at torque as

recommended in the manual.

If equipped with brakes, maintain proper

adjustment.

46-0800-8 1

CAUTION

FRONT OF MIXER

PART NO. 46-0004-2

6

1

5

7

3

4

2

PART NO. 46-0800-8

1

PART NO. 46-3600-9

2

PART NO. 46-0800-6

3

6

4

PART NO. 46-3600-6

PART NO. 46-0800-7

5

PART NO. 46-3600-2

(Located on trailer frame underneath housing)

7

1-800-325-9103

PB-SSM - 17 - www.meyermfg.com

CAUTION

46-0001-62 1

Use Flashing Warning

Lights when transporting

on ALL highways (public

roadways) at ALL times.

EXCEPT

WHEN PROHIBITED BY LAW!

(Check w/local law enforcement)

By all State and Federal laws, implement lights

do not replace the SMV (Slow-Moving Vehicle)

Identification Emblem. All towed agricultural

vehicles must display SMV Emblems when

traveling LESS than 20 mph (32 kph).

FRONT OF MIXER

1

2

3

4

5

PART NO. 46-0001-213

1

PART NO. 46-8500-7

2

3

PART NO. 46-0001-35

PART NO. 46-0001-62

4

5

PART NO. 46-0001-22

Meyer Manufacturing Corporation - 18 - PB-SSM

FRONT OF MIXER

1

2

3

PART NO. 46-0001-210

1

PART NO. 46-0001-205

2

PART NO. 46-0001-213

3

1-800-325-9103

PB-SSM - 19 - www.meyermfg.com

1

UNDER MIXER

PART NO. 46-0001-212

Meyer Manufacturing Corporation - 20 - PB-SSM

RIGHT SIDE OF MIXER

1

3

1

3

24

3

PART NO. 46-0001-213

1

PART NO. 46-0001-211

PART NO. 46-8500-7

2

PART NO. 46-0001-208

4

Page is loading ...

Meyer Single Screw Formula Mixer Owner's manual

Meyer Single Screw Formula Mixer Owner's manual

Related papers

Other documents