Minelab MDS-10 User guide

4903-0064-4

MDS-10 Unfolding Procedure

Attach Battery

4. Position the Armrest

5. Extend the Middle Shaft

1. Extend the Lower Shaft

2. Unfold the Detector

3. Unfold the Sensor Head

Field Guide

MDS-10 Dual Sensor Detector

a b

≈ 5 s

8 s

25 – 50 mm (1 – 2")

1. Turn On

2. MD Ground Balance

2 – 3 s

4. GPR Skyshot

3. MD Test Piece

5. GPR Test Target 6. Begin Detecting

Quick StartFactory Reset

This manual is also suitable for

Download PDF