OKI C5650N Owner's manual

Category
Laser/LED printers
Type
Owner's manual

This manual is also suitable for

2
Contents Table des matières
Handy Reference
Guide de référence
pratique
Ordering Replacement
Supplies . . . . . . . . . . . . . . . . . . 6
Using the Printer Menu . . . . . . . 7
Tray 1 and Optional Tray 2 . . . . 9
Multi-Purpose Tray . . . . . . . . . 10
Exit Trays. . . . . . . . . . . . . . . . . 11
Duplex Printing . . . . . . . . . . . . 12
Print Media Settings . . . . . . . . 13
Print Media . . . . . . . . . . . . . . . 16
Power Save . . . . . . . . . . . . . . . 18
Control Panel . . . . . . . . . . . . . . 19
Clearing Media Jams . . . . . . . . 20
Jam 370, 373 . . . . . . . . . . . . .20
Jam 371. . . . . . . . . . . . . . . . .21
Jam 372, 380 . . . . . . . . . . . . .22
Jams 381 . . . . . . . . . . . . . . . .23
Jams 382, 383 . . . . . . . . . . . .25
Jam 390. . . . . . . . . . . . . . . . .26
Jam 391. . . . . . . . . . . . . . . . .27
Jam 392. . . . . . . . . . . . . . . . .28
Common Error Messages. . . . . 29
Service & Support . . . . . . . . . . 32
Commande de fournitures .36
L'utilisation des menus de
l'imprimante . . . . . . . . . . . . . . 37
Bac 1 et bac 2 optionnel . . . . . 39
Bac MF . . . . . . . . . . . . . . . . . . . 40
Bacs de sortie . . . . . . . . . . . . . 41
Impression duplex. . . . . . . . . . 42
Paramètres de support
d’impression . . . . . . . . . . . . . 43
Supports d'impression. . . . . . . 46
Gestion énergétique . . . . . . . . 49
Panneau de commande . . . . . . 50
Dégagement des bourrages . . 51
Bourrages 370, 373 . . . . . . . . 51
Bourrage 371. . . . . . . . . . . . . 52
Bourrages 372, 380 . . . . . . . . 53
Bourrage 381. . . . . . . . . . . . . 54
Bourrage 382, 383 . . . . . . . . . 56
Bourrage 390. . . . . . . . . . . . . 57
Bourrage 391. . . . . . . . . . . . . 58
Bourrage 392. . . . . . . . . . . . . 59
Messages d’erreur courants . . 60
Service et support . . . . . . . . . . 63
59396301
4: English
Handy Reference
6: English
How to Order
• Consult the dealer where you
purchased your printer.
• Consult an Oki Data Authorized
Sales or Service Dealer. For the
nearest dealer, call
1-800-654-3282.
• U.S., Puerto Rico, Guam,
U.S. Virgin Islands only: Order
on the Internet at
WWW.OKIPRINTINGSOLUTIONS.COM
.
• U.S. only: Order toll-free by
phone at 1-800-654-3282, using
VISA
®
, MasterCard
®
, or AMEX
®
.
Order Numbers
Important!
Use only genuine OKI Toner
Cartridges.
Toners, Type C8
Drums, Type C8
Maintenance Items: Fusers
and Transfer Belt
Maintenance items a
re warranted
against defects for 90 days. When
the printer display indicates that
they are near end of life, a
replacement must be purchased
Installation
The printer’s consumable items all
include replacement instructions.
Toner Oki Part
No.
Black, Standard 43381904
Black, High Capacity 43324404
Cyan, Standard 43381903
Cyan, High Capacity 43324403
Magenta, Standard 43381902
Magenta, High
Capacity
43324402
Yellow, Standard 43381901
Yellow, High Capacity 43324401
Drum Oki Part No.
Black 43381704
Cyan 43381703
Magenta 43381702
Yellow 43381701
Item Oki Part No.
Fuser, 120V 43853101
Fuser, 230V 43853102
Transfer Belt 43363401
English
Ordering Replacement Supplies
7: English
Note
Settings made in the printer
driver will override the printer
menu settings.
Navigating the Menu
1. Press
to enter the Menu mode.
2. Press
or
repeatedly to scroll through the
Categories, Items and Values.
3. Press
to select a Category, Item or
Value to change, or to engage
the new setting for a Value.
4. Press
to exit the Menu mode.
For Example
If the MP Tray will normally be
loaded with transparencies, set the
printer menu as follows:
1. Press E
NTER
.
2. Press + repeatedly until you see
MEDIA MENU
3. Press E
NTER
.
4. Press + repeatedly until you see
MPT MEDIATYPE
PLAIN *
5. Press E
NTER
.
The second line of the display
starts blinking.
6. Press + repeatedly until
TRANSPARENCY appears on the
second line of the display.
7. Press E
NTER
.
An asterisk appears next to your
selection.
8. Press E
NTER
.
The setting is engaged.
9. Press O
N
L
INE
.
Using the Printer Menu
Navigating
8: English
Note:
The menu listings will vary
depending on the model and
options installed.
Summary of Menu
Categories

Information Menu
Print the Menu Map, Network
settings or Demo page.

Shutdown Menu
Initiates the power-off process
which protects any data saved
in the printer from being lost
when the printer is turned off.

Print Menu
Set the number of copies, feed
tray used, etc.

Media Menu
Set media size and weight for
the various trays, etc.

Color Menu
Set color density, registration,
etc.

Sys Config Menu
Set power save, timeouts, etc.

USB Menu
Set paramenters for USB.

Network Menu
Set network parameters.

Maintenance Menu
Enable power save, and set
other printer parameters.

Usage Menu
Indicates page counts and
remaining life for consumables.
Printing the MenuMap
The MenuMap provides a listing of
the current printer menu settings.
1. Press + one or more times until
you see
INFORMATION MENU
2. Press E
NTER
.
PRINT MENU MAP
EXECUTE
3. Press E
NTER
.
The MenuMap prints and the
printer goes back on line.
Using the Printer Menu
Menu Summary
9: English
Loading Paper
1
2
3
4
5
Media Weight Range
Tray 1: 17 to 32 lb. US Bond (64 to 120 g/m
2
)
Optional Tray 2: 17 to 47 lb. US Bond (64 to 176
g/m
2
)
Media Size Range:
Letter, Legal-14, Legal-13.5, Legal-13, Executive,
A4, A5, B5
Tray 1 Only: A6
Capacity:
Tray 1: 300 sheets of 20-lb. (75 g/m
2
) paper
Optional Tray 2: 530 sheets of 20-lb. (75 g/m
2
)
paper
Tray 1 and Optional Tray 2
10: English
Loading Paper
1
2
3
4
5
6
Letterhead stationery
• Single-sided printing: load face
up, top edge into the printer.
• Double-sided printing: load face
down with top edge away from
the printer.
Weight
Range
20 to 54 lb. US Bond (42 to 113 lb. Index, 75 to 203 g/m
2
metric)
Size Range:
Min. 3" x 5" [76 x 104 mm], max. 8.5" x 14" [216 x 356 mm]
(Non-standard sizes must be defined in driver before printing:
see your on-line User’s Guide.)
Banners: 8.25 to 8.5'' [210 to 216 mm] wide by up to 47.25''
[1.2 m] long. Must be fed one sheet at a time.
Takes:
100 sheets 20-lb. (75 g/m
2
) paper, 50 transparencies, 10
envelopes
Labels: max. feed stack = about 3/8-inch (10 mm) high
Multi-Purpose Tray
11: English
Top (Face Down) Exit
Tray
This is the exit tray that is normally
used.
• For papers up to 47 lb. US Bond
(176 g/m
2
).
• Holds up to 250 sheets of 20-lb.
US Bond (75 g/m
2
) paper.
•Sheets exit face down.
Rear (Face Up) Exit
Tray
• Provides straight-through,
curl-free print path for
transparencies, envelopes, labels
and heavy paper.
• Handles paper from 17 to 54 lb.
US Bond (64 to 203 g/m
2
).
• Holds up to 100 sheets of 20-lb.
US Bond (75 g/m
2
) paper.
• Sheets exit face up (for
multi-page documents, select
reverse order printing in your
application Print dialog box).
Note
If the rear tray is open, all
printed pages will exit there
regardless of the printer driver
setting.
Opening the Rear-Feed
Tray
1
2
Exit Trays
12: English
Note
Requires the duplex unit,
standard on Model C5650dn,
optional on Model C650n.
Long Edge versus
Short Edge
Long Edge
Short Edge
Specifications
Paper Weight
20 to 28 lb. US Bond (75 to 105
g/m
2
).
Note
If you experience curling with 20
or 24 lb. paper, switch to 28 lb.
Paper Feed
Tray 1, Optional Tray 2 or MP Tray.
Paper Exit
Top Exit Tray or Rear Exit tray.
How to Print a File
Using the Duplexer
Open the file you wish to print and
click File
→
Print. Select the
C5650 printer.
Windows
1. For all but Windows 2000, click
Properties or Preferences.
2. On the Setup tab, select Long
Edge or Short Edge under
2-Sided Printing.
Macintosh
1. Under Presets, select Duplex.
2. Under Duplex, select Long-Edge
Binding or Short-Edge Binding.
Duplex Printing
(Printing on Both Sides of the Page)
13: English
Why Change Media
Settings?
Always make sure the media
setting matches the print media
you are using.
Improper media settings:
• cause poor quality printing
•cause flaking
• can damage the printer
Media Settings:
Printer Driver Versus
Printer Menu
Print media settings can be made in
the printer driver or in the printer
menu.
• Printer driver settings override
printer menu settings.
Default Media Weight
Settings
The default media weight setting
for all trays is Medium (20 to 27 lb.
US Bond [75 to 101 g/m
2
]).
Changing Defaults
See pages 14 and 15.
Resetting to the
Original Defaults
1. Press E
NTER
.
2. Press - repeatedly until you see
MAINTENANCE MENU on the
display.
3. Press E
NTER
.
MENU RESET
EXECUTE
4. Press E
NTER
.
The printer resets and returns to
the on-line state.
Media Settings for
Individual Print Jobs
If you are printing a job on special
media, you can temporarily load
the media in a tray and change the
media settings for that tray in the
driver as you print the job.
Print Media Settings
General Information
14: English
Ranges for Printer
Media Weight
Media weight settings can be made
in the printer menu or the printer
driver.
Important!
Settings made in the printer driver
override the printer menu settings.
Note
The default media weight setting
for Trays 1 and 2 is Medium.
To Change the Media
Weight Default for
Tray 1 and Optional
Tray 2
1. Press E
NTER
to enter the Menu
mode.
2. Press + repeatedly until MEDIA
MENU appears on the display.
3. Press E
NTER
.
TRAY1 PAPERSIZE
LETTER
4. Press + repeatedly until
• For Tray 1:
TRAY1
MEDIAWEIGHT
• For Optional Tray 2:
TRAY2
MEDIAWEIGHT
appears on the display.
5. Press E
NTER
.
The second line of the display
starts blinking.
6. Press + repeatedly until the
second line of the display shows
the Value (Light, Medium, or
Heavy [see page 14]) you wish
to use.
7. Press E
NTER
.
8. Press O
N
L
INE
.
Selectable Media Weight
Settings, US Bond
Setting US Bond (Metric)
Light 17 to 19 lb.
(64 to 71 g/m
2
)
Medium 20 to 27 lb.
(75 to 101 g/m
2
)
Heavy 28 to 32 lb.
(105 to 120 g/m
2
)
Ultra Heavy 33 to 54 lb.
(124 to 203 g/m
2
)
Selectable Media Weight
Settings, Index
Setting Index (Metric)
Light 35 to 40 lb.
(64 to 71 g/m
2
)
Medium 42 to 56 lb.
(75 to 101 g/m
2
)
Heavy 58 to 67 lb.
(105 to 120 g/m
2
)
Ultra Heavy 69 to 113 lb.
(124 to 203 g/m
2
)
Print Media Settings
Media Weight
15: English
Note
For the MP Tray, the default
settings are:
•Media Type = Plain.
• Media Size = Letter
To Set Transparencies as
the Default Media in the
MP Tray,
see page 7.
To Set Heavy Paper, Labels,
or Envelopes as the
Default Media in the MP
Tray
First, set the Media Size
1. Press E
NTER
to enter the Menu
mode.
2. Press + repeatedly until MEDIA
MENU appears on the display.
3. Press E
NTER
.
TRAY1 PAPERSIZE
LETTER *
4. Press + repeatedly until MPT
PAPERSIZE appears on the
display.
5. Press E
NTER
.
The second line of the display
starts blinking.
6. Press Press + repeatedly until
the second line of the display
shows the Value
(for envelopes,
select
COM-10 ENVELOPE)
you
wish to use.
7. Press E
NTER
twice.
The setting is engaged and the
second line of the display stops
blinking.
8.
Envelopes
: If you are setting
the MP Tray for envelopes, press
O
N
L
INE
and you are done.
Heavy paper / labels:
If you
are setting the MP Tray for
heavy paper or labels, keep
going.
Heavy Paper and Labels Only:
Set
the Media Type
9. Press +.
MPT MEDIATYPE
PLAIN *
10.Press E
NTER
.
The second line of the display
starts blinking.
11.Press + repeatedly until your
choice of CARD STOCK or
LABELS appears on the second
line of the display.
12.Press Enter.
13.Press Back.
The setting is engaged and the
second line of the display stops
blinking.
14.Press O
N
L
INE
.
The printer goes back on line.
Print Media Settings
Default Media: MP Tray
16: English
Caution!
Print media must be able to
withstand 446°F (230°C) for 0.2
second, including mechanical
pressures to 25 psi (1.8 kg/cm
2
).
Banner Paper
Settings
•Size:
– Width: 8¼ to 8½" (210 to 216
mm)
– Length: 14 to 47¼" (357 to
1200 mm)
•
Weight
: up to 34 lb. US Bond
(128 g/m
2
)
•
Feed
: MP Tray Only
•
Exit
: Rear Exit Tray Only
•
Printing
: Simplex (1-sided)
Only
Note
Banner paper must be fed in one
sheet at a time.
Banners often require additional
printer memnory. If you wil be
printing banners, it is
recommended that you purchase
and install the optional 64 MB
DIMM (Oki 70057501).
Transparencies
Important!
Use only recommended transparencies.
Settings
•
Size
: Letter or A4
•
Feed
: MP Tray Only
•
Exit
: Rear Exit Tray Only
•
Media Type Setting
:
Transparencies
•
Media Weight Setting
:
Ignored
Recommended
•Oki
52205701
Premium Color
Transparencies
• 3M CG3720
Printing Individual Jobs
Make the following settings in the
printer driver as you print the job:
•Source = MP Tray
• Media Size = Letter or A4
• Media Type = Transparency
Labels
Loading Labels
• Multi-Purpose tray
•Label side up
• Top edge aimed into the printer.
Settings
•
Size
: Letter or A4
•
Feed
: MP Tray Only
•
Exit
: Rear Exit Tray Only
•
Media Type Setting
: Labels
•
Media Weight Setting
:
Medium, Heavy or Ultra Heavy
Recommended
• Avery 5161 White Laser Label,
Letter Size
• Avery 7162, 7664, 7666 White
Laser Labels, A4 Size
Printing Individual Jobs
Make the following settings in the
printer driver as you print the job:
•Source = MP Tray
• Media Size = Letter or A4
• Media Type = Labels
Print Media
17: English
Caution!
Print media must be able to
withstand 446°F (230°C) for 0.2
second, including mechanical
pressures to 25 psi (1.8 kg/cm
2
).
Thick Paper (Cards)
Caution!
To avoid damage to the printer,
ALWAYS CHANGE THE PRINTER
SETTINGS WHEN PRINTING ON
THICK MEDIA.
Settings
•
Size
:
– Letter, Executive, Legal-14,
Legal-13.5, Legal-13, A4, A5,
A6, B5
– Custom (must be defined in the
printer driver).
•
Feed
: Tray 1 or MP Tray
•
Exit
: Rear Only
•
Media Type
: Card Stock
•
Media Weight
:
–Tray 1: Heavy
– MP Tray: Heavy, Ultra Heavy
Recommended
• Oki Premium Card Stock:
– 52205601 60 lb. Cover
– 52205602 90 lb. Index
– 52205603 110 lb. Index
Printing Individual Jobs
Make the following settings in the
printer driver as you print the job:
•Source = Tray1 (
17 lb. to 32 lb.
US Bond) or MP Tray (
20 lb. to
54 lb.
US Bond)
• Size = see sizes above
• Type = Heavy or Ultra Heavy
(see page 14).
Envelopes
Important!
For the best print results, use only
the recommended envelopes.
Never use envelopes with metal
clasps, snaps, windows, or V-flap
seals:
Settings
•
Size
: Com-10
•
Feed
: MP Tray Only
•
Exit
: Rear Exit Tray Only
•
Media Type Setting
: Ignored
•
Media Weight Setting
:
Ignored
Recommended
• Oki 52206301, 52206302
Premium Envelopes.
Printing ndividual Jobs
Make the following settings in the
printer driver as you print the job:
•Source = MP Tray
• Size = COM-10
Print Media
18: English
Power Save sets how long the
printer waits before going into
standby mode. This saves energy,
but the printer requires time to
warm up when it receives a print
job or if you want to enter the
menu and change settings.
Setting the Power Save
Interval
1. Press E
NTER
.
2. Press + repeatedly until you see
SYS CONFIG MENU on the
display.
3. Press E
NTER
.
POW SAVE TIME
60 MIN *
4. Press E
NTER
.
The second line of the display
starts blinking.
5. Press + repeatedly until the
value you wish to select (
5, 15,
30, 60 [default], or 240
minutes) appears on the
display.
6. Press E
NTER
.
The new setting is engaged and
the second line of the display
stops blinking.
7. Press O
N
L
INE
.
Disabling (or
Re-enabling) Power
Save
The printer comes set for Power
Save enabled. To disable (or
enable) Power Save
1. Press E
NTER
to enter Menu
mode.
2. Press - repeatedly until you see
MAINTENANCE MENU on the
display.
3. Press E
NTER
.
4. Press + repeatedy until you see
POWER SAVE
ENABLE†
5. Press E
NTER
.
The second line of the display
starts blinking.
6. Press + to toggle back and forth
between DISABLE and ENBABLE.
7. Press B
ACK
.
The new setting is engaged and
the second line of the display
stops blinking.
8. Press O
N
L
INE
.
Power Save
19: English
Back Button
Press and hold for four seconds to
start printer shutdown.
In the Menu mode, press B
ACK
to
go back to the previous Item or
Category, or to place the printer
back on line.
+ Button
Press + to enter the Menu mode or
to go to the next Category, Item or
Value in the Menu.
Press and hold this button to
advance rapidly through the
entries.
– Button
Press – to go back to the previous
Category, Item or Value in the
Menu.
Press and hold – to rapidly advance
backwards rapidly through the
entries.
Enter Button
Press E
NTER
to enter the Menu
mode.
Menu mode: press E
NTER
to select a
Category or Item to change. Once
you have changed the setting to a
new Value, press E
NTER
to engage
the Value.
On Line Button
Press O
N
L
INE
to switch the printer
between on line and off line status.
Menu mode: press O
N
L
INE
to exit
the Menu mode and return the
printer to on line.
If there is a paper size mismatch
error, press O
N
L
INE
to force the job
to print.
Press O
N
L
INE
to start a manual
print job from the MP Tray once
paper has been loaded.
If there is a memory overflow,
press O
N
L
INE
to recover and place
the printer back on line.
Cancel Button
Press and hold C
ANCEL
to stop
printing the current job.
Menu mode: press C
ANCEL
to exit
the Menu mode and place the
printer back on line.
Ready Light (Green)
On:
printer is on line.
Off:
printer is off line.
Flashing:
printer is receiving data.
Attention Light (Red)
On:
Warning or Error status
Off:
Normal status.
Flashing:
Alarm status.
Control Panel
20: English
OPEN DUPLEX COVER
nnn: PAPER JAM
nnn = 370 or 373
1
2
or
or
3
CAUTION! Fuser may be HOT!
If the sheet is trapped in the
fuser, lift the top cover, reach in
and push the fuser pressure
release lever (
1
) towards the
front and down, and pull out the
sheet. Then let go of the fuser
pressure release lever.
Clearing Media Jams
Jam 370, 373
21: English
OPEN DUPLEX COVER
371: PAPER JAM
1 Power off!
2
3
4
5
6
7
Clearing Media Jams
Jam 371
22: English
OPEN FRONT COVER
nnn: PAPER JAM
nnn = 372 or 380
1
2
3
Clearing Media Jams
Jam 372, 380
23: English
OPEN TOP COVER
381: PAPER JAM
1
2
3 Remove the image drums/
toner cartridges:
Caution!
To avoid damage to the drums:
• Be sure to set the drums on a
flat surface.
• Do not touch the shiny green
area on the bottom of the
drums.
• Do not expose the drums to light
for more than 5 minutes.
4
CAUTION! The fuser (behind
cyan [C] toner) may be HOT.
C
M
Y
K
Clearing Media Jams
Jams 381
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123

OKI C5650N Owner's manual

Category
Laser/LED printers
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI