Bresser 80-10011 MyTime Duo Owner's manual

Page is loading ...

9

GARANTIE & SERVICE

Die reguläre Garantiezeit beträgt 2 Jahre und beginnt am Tag

des Kaufs. Um von einer verlängerten, freiwilligen Garantie-

zeit wie auf dem Geschenkkarton angegeben zu protieren,

ist eine Registrierung auf unserer Website erforderlich. Die

vollständigen Garantiebedingungen sowie Informationen zu

Garantiezeitverlängerung und Serviceleistungen können Sie

unter www.bresser.de/garantiebedingungen einsehen. Sie

wünschen eine ausführliche Anleitung zu diesem Produkt

in einer bestimmten Sprache? Dann besuchen Sie unsere

Website über nachfolgenden Link (QR Code) für verfügbare

Versionen.

DE

GB

FR

NL

IT

ES

About this Instruction Manual

These operating instructions are to be considered a

component of the device.

Please read the safety instructions and the operating

instructions carefully before use.

Keep these instructions for renewed use at a later date.

When the device is sold or given to someone else, the

instruction manual must be provided to the new owner/user

of the product.

The device is intended only for indoor use.

General Warnings

RISK of bodily injury!

Children should only use the device under adult supervision.

Keep packaging material, like plastic bags and rubber

bands, out of the reach of children, as these materials pose

a CHOKING HAZARD.

10

NOTE!

Do not disassemble the device. In the event of a defect,

please contact your dealer. The dealer will contact the

Service Centre and can send the device in to be repaired,

if necessary.

Protect the device from severe shocks!

Use only the recommended batteries. Always replace weak

or empty batteries with a new, complete set of batteries at

full capacity. Do not use batteries from different brands or

with different capacities. The batteries should be removed

from the unit if it has not been used for a long time.

Never recharge normal, non-rechargeable batteries. This

could lead to explosion during the charging process.

The manufacturer is not liable for damage related to

improperly installed batteries.

This device contains electronic components that operate

via a power source (batteries). Children should only use

the device under adult supervision. Only use the device as

described in the manual; otherwise, you run the RISK OF AN

ELECTRIC SHOCK.

Leaking battery acid can lead to chemical burns. Avoid

contact of battery acid with skin, eyes and mucous

membranes. In the event of contact, rinse the affected

region immediately with a plenty of water and seek medical

attention.

RISK OF FIRE/EXPLOSION!

Do not expose the device to high temperatures. Use only

the recommended batteries. Do not short-circuit the device

or batteries, or throw them into a fire. Excessive heat or

improper handling could trigger a short-circuit, a fire or an

explosion.

11

DELIVERY CONTENTS

Alarm clock (A), instruction manual

Required batteries:

3 pieces of Alkaline batteries (1.5V, type AAA)

PARTS OVERVIEW

B LC Display, showing

a. Current time (Year), b. Alarm symbols, c. Alarm time,

d. Month/Day, e. Temperature, f. Humidity

C SNOOZE/LIGHT button

D AL ON/OFF slide-button

E 12/24 YEAR button

F HOUR/MONTH button

G MIN/DATE button

H AL SELECT slide-button

I SET slide-button

J Loudspeaker

1) Battery compartment

1! Battery compartment cover

BATTERY INSTALLATION

Remove the cover (11) from the battery compartment (10).

Insert 3 pieces „AAA“ Alkaline battery according to the

polarity indicated in the battery compartment.

Close the compartment with the cover.

FUNCTIONS

The different models differ only in colour. All models have

the same functions as they are listed below.

ALARM TIME SETTING

Slide the SET slide-button (8) to ALARM SET position. The

display for alarm time 1 will flash.

Press the HOUR button to set the hours for the desired alarm

time. Repeatedly press the button to change one additional

DE

GB

FR

NL

IT

ES

12

hour at a time. Press the MIN button to set the minutes for the

desired alarm time. Repeatedly press the button to change

one more minute at a time. In order to set the alarm time 2,

press the 12/24 button once. The display for alarm time 2

will flash. The time can be set as per the above instructions.

After setting the alarm time, slide the SET slide-button (8) to

the LOCK position to complete the setting.

Note:

The alarm time setting must be done for both alarm

functions (AL 1 and AL 2) seperately one after another.

ACTIVATING/DEACTIVATING THE ALARM

After finishing the alarm time setting slide the AL ON/OFF

slide-button (3) to the position of the desired alarm function.

The following functions are possible:

Position AL OFF: Alarm deactivated

Position AL 1 ON: Alarm time 1 on

Position AL 2 ON: Alarm time 2 on

Position AL 1&2 ON: Alarm times 1 and 2 on

SET 12 OR 24 HOURS SYSTEM

Slide the SET button (8) into LOCK mode. Press to switch

between 12hr or 24hr system. When ‘AM’ appears, it means

12hr. Press 12/24 YEAR button again, ‘AM’ will disappear, it

means 24hr system.

TEMPERATURE DISPLAY

Press "MIN" button to switch between °C or °F temperature

display.

TIME AND DATE SETTING

Set year mode:

Slide SET button into DATE SET mode, the date setting mode

will blink. Press 12/24 YEAR button to reach the desired year.

13

Set hour:

Slide SET button (8) into TIME SET mode, the time mode will blink.

Press HOUR/MONTH button to reach the desired hour.

Set month:

Slide SET button into DATE SET mode, the month mode will

blink. Press HOUR/MONTH button to reach the desired hour.

Set minute:

Slide SET button (8) into TIME SET mode, the time mode will

blink. Press MIN/DATE button to reach the desired minute.

Set date:

Slide SET button into DATE SET mode, the month mode will

blink. Press MIN/DATE button to reach the desired date.

AL SELECT slide-button (7)

Slide AL SELECT button (7) to switch the alarm function

between WORKING DAY mode (five days alarm) and

NORMAL mode (one day single alarm).

Slide the button into WORKING DAY side,

MO-FR

is shown

on displays.

BACKGROUND ILLUMINATION AND SNOOZE FUNCTION

Press the SNOOZE/LIGHT button (2) to turn on the LED

backlight for 10 seconds.

Press SNOOZE/LIGHT button when the alarm sounds to

interrupt the alarm for 5 minutes. Slide AL ON/OFF slide-

button to AL OFF position to deactivate the alarm.

RESETTING THE UNIT

In case of malfunction or abnormal display, take out and re-

install the batteries again. All settings will be cleared and

reset to their default values.

DE

GB

FR

NL

IT

ES

14

MAINTENANCE/CLEANING

Before cleaning the device, disconnect it from the power

supply (remove batteries).

Only use a dry cloth to clean the exterior of the device. To avoid

damaging the electronics, do not use any cleaning fluid.

Protect the device from dust and moisture. The batteries

should be removed from the unit if it has not been used for

a long time.

DISPOSAL

Dispose of the packaging materials properly, according

to their type, such as paper or cardboard. Contact your

local waste-disposal service or environmental authority for

information on the proper disposal.

Do not dispose of electronic devices in the household

garbage! As per Directive 2002/96/EC of the European

Parliament on waste electrical and electronic

equipment and its adaptation into German law, used

electronic devices must be collected separately and recycled

in an environmentally friendly manner.

In accordance with the regulations concerning batteries

and rechargeable batteries, disposing of them in the

normal household waste is explicitly forbidden. Please make sure

to dispose of your used batteries as required by law — at a local

collection point or in the retail market. Disposal in domestic

waste violates the Battery Directive.

Batteries that contain

toxins are marked with a sign and a chemical symbol. “Cd” =

cadmium, “Hg” = mercury, “Pb” = lead.

EC DECLARATION OF CONFORMITY

Bresser GmbH has issued a “Declaration of

Conformity” in accordance with applicable

guidelines and corresponding standards. This can be viewed

any time upon request.

15

WARRANTY & SERVICE

The regular guarantee period is 2 years and begins on the

day of purchase. To benefit from an extended voluntary

guarantee period as stated on the gift box, registration on

our website is required.

You can consult the full guarantee terms as well as

information on extending the guarantee period and details

of our services at www.bresser.de/warranty_terms.

Would you like detailed instructions for this product in a

particular language? Then visit our website via the link

below (QR code) for available versions.

DE

GB

FR

NL

IT

ES

A propos de ce manuel

Le présent mode d‘emploi doit être considéré comme

faisant partie intégrante de l’appareil.

Avant d’utiliser l’appareil, veuillez lire attentivement les

consignes de sécurité et le mode d’emploi.

Conservez celui-ci afin de pouvoir le réutiliser ultérieurement

le cas échéant. En cas de revente ou de cession de l’appareil,

le mode d’emploi doit être remis à tout propriétaire ou

utilisateur suivant du produit.

Cet appareil est uniquement destiné à une utilisation en

intérieur.

Consignes générales de sécurité

RISQUE de dommages corporels !

Les enfants ne doivent utiliser cet appareil que sous

surveillance. Maintenez les enfants éloignés des matériaux

d’emballage (sacs plastiques, bandes en caoutchouc, etc.) !

Page is loading ...

Bresser GmbH

Gutenbergstr. 2 · DE-46414 Rhede

Germany

www.bresser.de · service@bresser.de

Irrtümer und technische Änderungen vorbehalten. · Errors and technical changes reserved.

Sous réserve d’erreurs et de modications techniques. · Vergissingen en technische veranderingen voorbehouden.

Con riserva di errori e modiche tecniche.

Queda reservada la posibilidad de incluir modicaciones o de que el texto contenga errores.

Manual_801001X_MyTime-Duo_de-en-fr-nl-it-es_BRESSER_v012019a

www.bresser.de/start/bresser

Bresser 80-10011 MyTime Duo Owner's manual

Bresser 80-10011 MyTime Duo Owner's manual

in other languages

Related papers

Other documents