DeckoRail 317785 Installation guide

Brand: DeckoRail

Model: 317785

Type: Installation guide

DeckoRail 317785 is a horizontal rail bracket designed for use with molded rails in the horizontal position. The bracket is easy to install, requiring only a drill/power screwdriver, tape measure, carpenter’s pencil, safety goggles, and gloves.

To install the bracket, simply measure the distance between two posts and subtract 1/2”. Cut rails to this length and attach a connector to each end of the rail with two screws through the pre-drilled holes. Set the rail at the desired height and fasten with screws through the pre-drilled holes.

DeckoRail 317785 is a versatile bracket that can be used for a variety of applications, including:

Step 1

Installation Instructions

Note: For use with moulded rails in the horizontal

position. Pre-drill all screw holes to minimize

splitting.

Step 1

Measure the distance between two posts and

subtract 1/2”. Cut rails to this length. Attach a

connector to each end of the rail with two screws

through the pre-drilled holes.

Step 2

Set the rail at the desired height and check to

ensure it is level. Fasten with screws through the

pre-drilled holes.

HORIZONTAL RAIL BRACKET

INSTALLATION INSTRUCTIONS

Tools Needed

Drill/power screwdriver

Tape measure

Carpenter’s pencil

Safety goggles

Gloves

Items Included

(4) Brackets

(24) Screws

THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR

USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE

CONSTRUCTION OR USE OF THIS PRODUCT. UNIVERSAL CONSUMER PRODUCTS, INC. DOES NOT PROVIDE ANY WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY

DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.

Deckorail.com

9665_11/17

Step 2

Paso 1

Instrucciones para la Instalación

Nota: Para su uso con barandales moldeados en

posición horizontal. Taladre previamente todos los

orificios de tornillo para evitar rajaduras.

Paso 1

Mida la distancia entre dos postes y réstele ½”. Corte

los barandales a esta longitud. Sujete un conector a

cada extremo del barandal usando dos tornillos que

atraviesen los agujeros taladrados previamente.

Paso 2

Coloque el barandal a la altura deseada y verifique que

se encuentra a nivel. Fíjelo con tornillos en los agujeros

taladrados previamente.

INSTRUCCIONES DE INSTALACIÓN DEL

BARANDAL HORIZONTAL CON SOPORTES

Herramientas Necesarias

Destornillador/taladro eléctrico

Cinta métrica

Lápiz de carpintero

Lentes de seguridad

Guantes

Artículos Incluidos

(4) Soportes

(24) Tornillos

LOS DIAGRAMAS E INSTRUCCIONES DE ESTE FOLLETO SON PARA FINES ILUSTRATIVOS SOLAMENTE Y NO ESTÁN DESTINADOS A REEMPLAZAR A UN PROFESIONAL CON LICENCIA. CUALQUIER

CONSTRUCCIÓN O USO DEL PRODUCTO DEBE ESTAR EN CONFORMIDAD CON TODOS LOS CÓDIGOS LOCALES DE CONSTRUCCIÓN O DE ZONIFICACIÓN. EL USUARIO ASUME TODOS LOS RIESGOS

Y RESPONSABILIDADES RELACIONADOS CON LA CONSTRUCCIÓN O EL USO DE ESTE PRODUCTO. UNIVERSAL CONSUMER PRODUCTS, INC. NO PROPORCIONA NINGUNA OTRA GARANTÍA, NI