Simple Deluxe HIFANXWALLDIGIT Installation guide

Brand: Simple Deluxe

Model: HIFANXWALLDIGIT

Type: Installation guide

Simple Deluxe HIFANXWALLDIGIT

This powerful 16-inch wall-mounted fan is the perfect cooling solution for your home or office. With 3-speed settings, oscillation, and a variety of modes, you can customize the airflow to your liking.

Features:

3-speed settings: low, medium, and high
Oscillation: provides wide-area cooling
3 modes: normal, natural, and sleep
Timer: set the fan to turn off automatically after a specified amount of time
Remote control: operate the fan from across the room

Use cases:

Keep your bedroom cool and comfortable at night
Circulate air in your living room or office

Simple Deluxe HIFANXWALLDIGIT

Features:

3-speed settings: low, medium, and high
Oscillation: provides wide-area cooling
3 modes: normal, natural, and sleep
Timer: set the fan to turn off automatically after a specified amount of time
Remote control: operate the fan from across the room

Use cases:

Keep your bedroom cool and comfortable at night
Circulate air in your living room or office

This appliance is not intended for use by persons including children with reduced physical,

sensory, or mental capabilities, or lack of experienc e and knowledge, unless they have been

given supervision or instructio n concerning use of the appliances by a person responsible

for their safety.

THERE ARE NO USER SERVICEABLE PARTS INSIDE AND THE CASING SHOULD

NOT BE OPENED BY AN UNQUALIFIED PERSON

Electrical Connection

Ensure your supply is rated at 120 V and 60Hz before operating the appl

iance.

Model:HIFANXWALLDIGIT

16” Wall Fan

Operating Instructions

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND RETAIN FOR

FUTURE REFERENCE

Cleaning

1) Switch the fan off and disconnect from the power. Ensure that the blade has come

to a complete stop before commencing cleaning.

2) Wipe off excess dust with a lint free cloth. To ensure adequate air circulation to

the motor, keep the vents at the rear

of the motor h ousing free from dust. The

brush attachments on your vacuum cleaner can be used to do this.

3) Do not immerse the body of the f an in water and ensure all external connections,

switches and sockets are kept dry.

4) Chemicals, dete

rgents or any abrasive cleaning powder, pads or polish of any kind

must not be used as they can damage the fan.

FOR YOUR OWN SAFETY:

DO NOT use in a bathroom or outdoors.

DO NOT allow the fan or its lead to be submerged in water.

DO NOT insert objects through the grilles on the fan.

DO NOT use the fan near an open flame, cooking or heating appliance.

DO NOT use near curtains or other loose fabrics.

ALWAYS ensure the fan unit is properly connected to the wall and the power lead properly

connected.

ALWAYS unplug the fan before cleaning or when removing from the wall.

ALWAYS ensure that the fan is left out of reach of ch

ildren or pets.

IMPOR

TANT – If the mains lead of this appliance becomes damaged then it must be

replaced by the manufacturer’s service agent, or a suitably qualified person, using the same

rated cable in order to avoid a hazard.

Assembly Instructions

1) Screws 8) Front Guard

2) Hanging Bracket 9) Safety screw

3) Motor control Assembly 10) Swivel brackets

4) Rear guard 11) Bracket fix

5) Rear guard securing ring 12)

6) Fan blade 13)

Control panel

7) Fan blade securing cap nut

Remote control

1) Mount the hanging bracket (2) o

n the wall with the screws (1) provided (fig 1.)

2) Hang the motor and control assembly (3) with the bracket (11) onto the hanging

bracket (fig 2)

3) Remove the plastic protector (12)

4) Loosen the rear guard securing ring (5) from the motor housing assembly.

5) Position the rear guard (4) firmly to the motor housing assembly and fasten by

turning the rear guard securing ring (5) clockwise tightly.

6) Push the fan blade (6) along the motor shaft.

7) Fasten securely using the fan blade securing unit nut (7) with the spinner by

turning anticlockwise.

Mount the front guard (8) to the rear guard by positioning the hook on the front

guard over the top

of the rear guard. Secure t

he two grilles with clips and screw

SPEED/ON

SWING

MODE

TIMER

ttached to the grill.

REMOTE CONTROL

sing Your Fan

Press the ”SPEED/ON” button.At first stat-up the fan will operate at low speed.

Press the same button to choose between Low,Medium and High speed.

There are 3 mode functions; Normal,Natural and Sleep.

Press ”SWING” button to switch on the oscillation mode.The fan oscillates

from left to right, to stop press the button again.

Press this button repeatedly to change the timer setting.When you press

the TIMER button the function is activated. You can set the timer from 0.5-7.5

hours,each time you press this button it will increase by 0.5 hours.No

obstacles should stand between the remote control and fan otherwise it will

not function.

The sensor of the remote control must be pointed at the fan receiver to The distance

between the remote and receiver should be no more than 5 metres from the front,

and 30 degrees no more than 3 metres, left to right of the fan.

Simple Deluxe HIFANXWALLDIGIT Installation guide

Brand: Simple Deluxe

Model: HIFANXWALLDIGIT

Type: Installation guide

Simple Deluxe HIFANXWALLDIGIT

Features:

3-speed settings: low, medium, and high
Oscillation: provides wide-area cooling
3 modes: normal, natural, and sleep
Timer: set the fan to turn off automatically after a specified amount of time
Remote control: operate the fan from across the room

Use cases:

Keep your bedroom cool and comfortable at night
Circulate air in your living room or office

Download PDF

report

Simple Deluxe HIFANXWALLDIGIT Installation guide

Simple Deluxe HIFANXWALLDIGIT Installation guide

Other documents