LBL Lighting SU1036GMLED930 Installation guide

LBL Lighting
Brand
LBL Lighting
Model
SU1036GMLED930
Type
Installation guide

This manual is also suitable for

LBL Lighting SU1036GMLED930

The LBL Lighting SU1036GMLED930 is a highly versatile and customizable linear suspension fixture that provides ample illumination for various indoor applications. With its damp location rating, it is suitable for both residential and commercial settings, including kitchens, dining rooms, and retail spaces.

This fixture allows you to adjust its height to suit your specific needs, ensuring optimal light distribution. The low-voltage electronic dimmer compatibility enables you to create the desired ambiance by adjusting the brightness levels. Its 90°C supply conductors enhance safety and reliability.

LBL Lighting SU1036GMLED930

The LBL Lighting SU1036GMLED930 is a highly versatile and customizable linear suspension fixture that provides ample illumination for various indoor applications. With its damp location rating, it is suitable for both residential and commercial settings, including kitchens, dining rooms, and retail spaces.

This fixture allows you to adjust its height to suit your specific needs, ensuring optimal light distribution. The low-voltage electronic dimmer compatibility enables you to create the desired ambiance by adjusting the brightness levels. Its 90°C supply conductors enhance safety and reliability.

1
Installation Instructions for
Balto Linear Suspension
980BALTOS
1.0
SU1036
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Suspension
1
1A
Install the Fixture
CANOPY
SCREW
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
NEC compliant junction boxes.
This product is suitable for damp locations.
This product may be dimmed with a low-voltage electronic dimmer.
Remove the canopy screws located on the sides of the canopy, then remove the mounting plate from the canopy.
Install the mounting plate onto the electrical box with the two #8-32 screws provided.
Adjust the Height (Optional): Determine the desired height of the fixture by loosening the set screws on the strain reliefs using the
provided Allen Wrench and evenly feeding the cords into the canopy. Re-tighten the sets screws once the desired height is achieved.
Connect the fixture to suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Properly place all wires and wire nut connections into the canopy, mount the fixture back onto the mounting plate, and reinstall fixture
screws (reversal of step 1).
NOTE: If minor adjustments to the fixture's leveling is necessary, it is recommended that one person hold the fixture straight with the use
of a level while the other adjusts the cords following the steps below.
Fine Leveling (Optional): Loosen (do not remove) the set screws on the necessary strain relief and gently pull or push the cord in very
small increments through the strain relief to adjust the height of the fixture. Re-tighten the set screw on the strain relief using the
provided Allen Wrench.
2
3
4
5
6
CANOPY
#8-32 SCREW
MOUNTING PLATE
1
1
2
2
7
8
SET SCREW
ALLEN WRENCH
CORD
5
6
CANOPY
SCREW
CORDCORD
CANOPY
7
7
7
2
SAVETHESE INSTRUCTIONS!
1
© 2018 Lighting.All rights reserved.The " Lighting" graphic is aLBL LBL
registered trademark of Lighting. Lighting reserves the right toLBL LBL
change specifications for product improvements without notification.
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.lbllighting.com
A Generation Brands Company
  • Page 1 1
  • Page 2 2

LBL Lighting SU1036GMLED930 Installation guide

LBL Lighting
Brand
LBL Lighting
Model
SU1036GMLED930
Type
Installation guide
This manual is also suitable for

LBL Lighting SU1036GMLED930

The LBL Lighting SU1036GMLED930 is a highly versatile and customizable linear suspension fixture that provides ample illumination for various indoor applications. With its damp location rating, it is suitable for both residential and commercial settings, including kitchens, dining rooms, and retail spaces.

This fixture allows you to adjust its height to suit your specific needs, ensuring optimal light distribution. The low-voltage electronic dimmer compatibility enables you to create the desired ambiance by adjusting the brightness levels. Its 90°C supply conductors enhance safety and reliability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents