STREAMNET APPLICATION SUITE (VERSION 3.01.47)
New Products Added
• No new products added in this release.
New Features Added
• Changed the default log level in order to log minimum details.
• Improved audio quality while using balanced-audio input in E120 Encoder.
• Serial Pass-through (one-way) Lua driver has been added as one of the available driver options for VIEW Pro devices. This is a
generic Lua driver that allows sending messages from the network to a device connected through Serial port of VIEW Pro Encoder
E120, Decoder D110, D210 devices.
• Included the latest version of PANORAMA Software.
Bugs Fixed in This Release
• Fixed occasional loss of audio through HDMI output of D110 Decoder.
Known Issues
• Decoder D210 Audio-Only renderers can not be used until Display screen connected through HDMI.
• Decoders D110 & D210 Audio-only renderers do not appear in static menus.
• Decoder D110 Decoder do not support interlace mode 1080i.
• For USB local playback feature in Decoders D110 & D210 will stop playing the video when very short duration video is used. The
current work-around is to make a multiple copies of the video and keep them in the connected USB drive.
Products Related With This Release
• VIEW Pro Encoder E120
• VIEW Pro Decoder D110
• VIEW Pro Decoder D210
Troubleshooting
Make sure that the system is setup correctly. Refer to the Installation and Design Guide for detailed instructions on how to connect devices
and terminate wires in the system. You can download this manual in the resource library in the ClearOne website:
http://www.clearone.com/resources#enterprise_streaming
PANORAMA™ SOFTWARE (VERSION 1.0.26)
New Features Added
• Added full screen mode of the application, so that when PANORAMA application is launched it always open with maximized screen
size.
• Reduced the switching time between layouts and source on Video-wall.
• Added support for orientations - Landscape, portrait, reverse portrait and reverse landscape.
• Improved Overlay & Audio-mapping features.
Bugs Fixed in This Release
• Cloning of streams now copies all the details properly.
• Maintain Aspect Ratio setting work properly for stream and crop layer.
Known Issues
• Device names for renderers in audio-mapping do not use Dealer-Setup configured names.
• Overlay volume bars are limited to always show in pair as left and right.
Products Related With This Release
• VIEW Pro Encoder E120
• VIEW Pro Decoder D110
• VIEW Pro Decoder D210
LAST RELEASE DETAILS
• Release date: November 3, 2016
• StreamNet Application Suite: Version 3.01.23
• StreamNet Dealer Setup: Version 3.01.23
• StreamNet Firmware: Version: 3.01.23
• VIEW/NetStreams Products Firmware: Version 3.01.23
• PANORAMA Software: Version 1.0.1