MAY 2, 2016

Product Versions Released:

• StreamNet Application Suite: Version 3.01.47

• StreamNet Dealer Setup: Version 3.01.47

• VIEW/Netstreams Products Firmware: Version: 3.01.47

• VIEW Pro Products Firmware: Version 3.01.47

• PANORAMA Software: Version 1.0.26

OVERVIEW

Document Purpose:

System Requirements:

• Microsoft Windows XP, Vista or 7, 8.1,10 (32 bit or 64 Bit OS)

• Intel or AMD 600 MHz class processor (1 GHz or higher recommended)

• 1GB RAM Minimum (higher recommended)

• 1GB hard disk space minimum (Additional space is required to store the project files that are created using StreamNet Dealer Setup

based on the project file size)

• Ethernet Network Interface to connect your computer to StreamNet Network

• Admin permission to install the software

• Adobe

®

®

For any of the applications, after successfully downloading the zip file containing the application, open it and run the included program and

follow the instructions provided.

Uninstall

It is not necessary to uninstall any previously installed version of the application.

RELEASE NOTES

StreamNet

• Improved audio quality while using balanced-audio input in E120 Encoder.

• Serial Pass-through (one-way) Lua driver has been added as one of the available driver options for VIEW Pro devices. This is a

generic Lua driver that allows sending messages from the network to a device connected through Serial port of VIEW Pro Encoder

E120, Decoder D110, D210 devices.

• Included the latest version of PANORAMA Software.

Bugs Fixed in This Release

• Fixed occasional loss of audio through HDMI output of D110 Decoder.

Known Issues

• Decoder D210 Audio-Only renderers can not be used until Display screen connected through HDMI.

• Decoders D110 & D210 Audio-only renderers do not appear in static menus.

• VIEW Pro Decoder D210

Troubleshooting

Make sure that the system is setup correctly. Refer to the Installation and Design Guide for detailed instructions on how to connect devices

and terminate wires in the system. You can download this manual in the resource library in the ClearOne website:

http://www.clearone.com/resources#enterprise_streaming

PANORAMA™ SOFTWARE (VERSION 1.0.26)

New Features Added

• Added full screen mode of the application, so that when PANORAMA application is launched it always open with maximized screen

size.

• Reduced the switching time between layouts and source on Video-wall.

• Device names for renderers in audio-mapping do not use Dealer-Setup configured names.

• Overlay volume bars are limited to always show in pair as left and right.

Products Related With This Release

• VIEW Pro Encoder E120

• VIEW Pro Decoder D110

• VIEW Pro Decoder D210

LAST RELEASE DETAILS

• Release date: November 3, 2016

• StreamNet Application Suite: Version 3.01.23

• StreamNet Dealer Setup: Version 3.01.23

The Power of AV over IP™

Other useful links to get more details about our products, solutions, technology etc.:

Documents

http://www.clearone.com/partners/

Contacts

If you need assistance setting up or operating your product, please contact us. We welcome your comments so we can continue to

improve our products and better meet your needs.