IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning, and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
Place PTO (Blade Engage) Lever
in Off position.
Pull Choke outward.
Move Throttle to Rabbit (fast) position.
Push Choke in once unit is running.
Insert key and turn to Start position.
Release after engine starts.
Place Shift Lever in N
(neutral) position.
Fully depress the Brake Pedal.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
778-11141© 2006 13AP60TP766, 13AX60TG766
Is the battery connected? Fresh gas in the unit?
See Operator’s Manual for additional troubleshooting tips.
Stopping the Unit
PTO (Blade
Engage) Lever
Shift
Lever
Throttle
Control
Lever
Ignition
Switch
Brake
Pedal
Parking
Brake
Button
Didn’t Start?
Choke
Control
Knob
Turn key counterclockwise to
Stop position and remove.
Place shift lever in N
(neutral) position.
Depress brake pedal. Set
parking brake by pushing
Parking Brake button.
Put PTO (blade engage)
lever in the Off position.
/