FormNo.3371-545RevA
Anti-VibrationHandlebarKit
HoverPro
ModelNo.02624
InstallationInstructions
Safety
•Beforeusingthiskit,refertotheHoverProOperator’s
Manualsafetysection.
•Theanti-vibrationhandlebarjointisnotasrigidasthe
originaljoint.Takeextracarewhenmaneuveringthe
machine.
•Donotusetheanti-vibrationkitinconjunctionwiththe
transportwheelkit(02622).Theweightofthemachine
whileusingthetransportwheelkitwillputexcessivestress
ontheanti-vibrationmounts,causingthemtoshear.
Installation
1.Removethethrottlecontrolfromthehandlebar.
2.RemovethehandwheelsandU-boltstodissasemble
theupperhandlebarfromthelowerhandlebar.
3.Installthenewhandletothelowerhandlebarusing
8washers,8locknuts,4saddles,and2anti-vibration
mounts(
Figure1).
4.Placethe2handlegripsonthehandle(Figure1).
5.Installthethrottlecontroltothehandlebar.
g018554
1
2
3
4
5
6
Figure1
1.Handle4.Washer
2.Handlegrip5.Locknut
3.Saddle
6.Anti-vibrationmount
©2011—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUK.
AllRightsReserved
*3371-545*A
/
