Spira Mailbox SPA-B001SS Installation guide
- Type
- Installation guide
Spira Post
Fasteners included:
Contents:
2 - 3/8” Stainless steel bolts
2 - 3/8” stainless nuts
2 - Stainless steel washers
2 - Retainer washers
Postbox, Address
Plate and Cap
Purchased Separately
2.
Assemble fasteners to
Spira Postbox then slide
into keyhole slots
on post and tighten.
3.
If the house number plate was
purchased, place before
securing lower fastener.
Mailbox and
Post System
A Brand of 603 Products, LLC
Stainless Large Installed
Black Large
Spira Postbox Family
Please visit our
website for a complete
listing of products and
accessories available.
Black Medium Stainless MediumStainless Large
Assemble fasteners to Postbox
before hanging on keyhole slots.
www.SpiraMailbox.com - Telephone 603-836-0516
© Spira Mailbx by 603 Products, LLC
info@SpiraMailbox.com
Assembly Instructions
1.
Place washers between
the Spira Postbox and
fasteners
Use 9/16” or 14mm
socket or wrench
.
Designed in the USA
24”
Install post 24” under
ground level
Installation
-
1
Spira Mailbox SPA-B001SS Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Bush Spira D5 User manual
-
-
-
-
Bush Sim User manual
-
-
Bush Sim User manual
-
Genius JA105 Operating instructions
-
-