Bellaterra Home 7611-MC-ES Operating instructions

Bellaterra Home
Brand
Bellaterra Home
Model
7611-MC-ES
Type
Operating instructions

This manual is also suitable for

NOTE: SINK STYLE, SHAPE, FAUCET HOLES, CUTOUT ON TOP, VANITY MAY VARY FROM THE PICTURE ABOVE.
INSTRUCTIONAL PURPOSE ONLY.
Professional installation is recommended.
www.bellaterra-home.com
Bellaterra Home LLC, All Rights Reserved 2015
INSTALLATION
TIPS:
press down the
pin on this side
& press up the
one on another
side to pull out
the drawer box.
Model: 7611-MIRROR CABINET
Tools List (Not included)
Spirit Level
Tape Measure
Pencil Electrtic Drill
Drill Bit
Screwdriver
Screw
(2pcs)
Anchor
(2pcs)
Parts List (Included)
Decoration cap
(2pcs)
Mark the position of the screw holes on the wall by measuring the space between the
mounting brackets on the back of the mirror cabinet. Vertical position (X) is decided
by the use. Use a spirit level to ensure the screws holes are in line.
Draw horizontal line
Mark the screw position
Drill the holes
for screw
Step 1
Insert the anchor into the screw hole for reinforcement.
Step 2
Step 3
This cabinet is common for left open
or right open, depends on the user.
Step 4
Attach the mirror cabinet to the wall by lowering the hole on the back of mirror cabinet
onto the screws, then cover with the decoration cap.
Use a spirit level to ensure the mirror is level from left to right, adjust if needed.
Licensed professional installation is recommended. These instruction are for
mounting into studs or other in-wall reinforcement, drywall alone is not sufficient
to support wall-hung vanities.
Other installation techniques may require a licensed professional.
  • Page 1 1

Bellaterra Home 7611-MC-ES Operating instructions

Bellaterra Home
Brand
Bellaterra Home
Model
7611-MC-ES
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents