1. Place mirror in the desired location on the wall. Mark a line on the wall at the top
center of the mirror (two people are required for this step). Carefully set the mirror
aside when complete.
2. Position the Wall Bracket so that the top of the bracket is 4-1/2 inches below the
Top of Mirror Line from step #1. Use a level to ensure the Wall Bracket is level, then
mark the positions of the Wall Bracket Screw Holes.
Note: The ridges on the Wall Bracket should be against the wall and the screw
holes should be on the bottom. See illustrations.
3. Using a ¼-inch bit, drill pilot holes into the marked locations. Insert the provided
anchors until flush with the wall surface. Place the Wall Bracket onto the wall and
secure with the provided screws.
4. Carefully hang the mirror by placing the Mirror Mounting Plate onto the Wall
Bracket. Positioning can be adjusted side to side by gently sliding the mirror
along the bracket.
ILLUSTRATION
Mirror Outline
Top of Mirror Line
(Step #1)
4-1/2 inches
(Step #2)
Wall Bracket Screw Holes (see reverse)
Installation Guide
ILLUSTRATION (CONTINUED)
Mirror
Mounting
Plate
Wall
Bracket
PRO TIPS
The best and safest way to clean your
mirror is by using warm water and a soft,
lint-free cloth.
Wring water from the cloth before wiping
the mirror to avoid excess moisture.
Keep bathrooms well ventilated.
Oil-free #0000 steel wool is a great way to
remove stubborn marks on glass (this is a
favorite tool in our workshop).
If a cleaning agent is required, use an
ammonia-free option (Windex
®
Ammonia-Free Glass Cleaner is a great
choice).
THINGS TO AVOID
Avoid using cleaners that contain
ammonia or vinegar – these can cause
corrosion on the edges of the mirror.
Never use abrasive cleaners.
If your mirror sits directly on a vanity,
avoid having excess water puddle along
the bottom of the mirror.
Avoid spraying cleaners directly onto the
mirror.
QUESTIONS?
Email [email protected] and
we’ll be in touch within 24 hours. Thank
you!
Care Guide
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Dyconn M12AT2434W Installation guide
-
KraftMaid VC4821L6S7.RBE.7118PN Installation guide
-
GlassCrafters GC4830-TR Installation Instructions Manual
-
True GDT Series Technical & Service Manual
-
MAAX 126549-801-001-000 SVD2436 Installation guide
-
-
-
-
-
