Toro Light Materials Bucket is a versatile attachment designed for compact tool carriers with a maximum load rating of 234 kg (515 lb). It has a 0.18 m3 (6.4 ft3) SAE struck capacity and can handle a variety of light materials, including caliche, clay, coal, and earth. The bucket's dimensions are 122 cm (48 inches) in width, 66 cm (26 inches) in length, and 46 cm (18 inches) in height. When transporting a load, keep the bucket as close to the ground as possible, no more than 15 cm (6 inches) above the lowest position.
Toro Light Materials Bucket is a versatile attachment designed for compact tool carriers with a maximum load rating of 234 kg (515 lb). It has a 0.18 m3 (6.4 ft3) SAE struck capacity and can handle a variety of light materials, including caliche, clay, coal, and earth. The bucket's dimensions are 122 cm (48 inches) in width, 66 cm (26 inches) in length, and 46 cm (18 inches) in height. When transporting a load, keep the bucket as close to the ground as possible, no more than 15 cm (6 inches) above the lowest position.
FormNo.3420-677RevA
LooseMaterialsBucket
CompactToolCarriers
ModelNo.22410—SerialNo.402000000andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3420-677*A
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemical
orchemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orreproductiveharm.
Useofthisproductmaycauseexposure
tochemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orotherreproductiveharm.
Introduction
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoid
injuryandproductdamage.Youareresponsiblefor
operatingtheproductproperlyandsafely.
YoumaycontactT orodirectlyatwww.T oro.com
forproductsafetyandoperationtrainingmaterials,
accessoryinformation,helpndingadealer,orto
registeryourproduct.
Wheneveryouneedservice,genuineT oroparts,or
additionalinformation,contactanAuthorizedService
DealerorT oroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.Figure1
identiesthelocationofthemodelandserialnumbers
ontheproduct.Writethenumbersinthespace
provided.
Important:Withyourmobiledevice,youcan
scantheQRcodeontheserialnumberdecal(if
equipped)toaccesswarranty,parts,andother
productinformation.
g240343
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafety-alertsymbol
(Figure2),whichsignalsahazardthatmaycause
seriousinjuryordeathifyoudonotfollowthe
recommendedprecautions.
g000502
Figure2
1.Safety-alertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Safety.......................................................................3
GeneralSafety...................................................3
SlopeSafety.......................................................3
AttachmentSafety..............................................4
MaintenanceandStorageSafety........................4
SafetyandInstructionalDecals..........................4
Operation..................................................................4
TransportPosition..............................................4
Specications.....................................................5
MaximumMaterialDensityatCapacity...............5
Storage.....................................................................6
©2018—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA
AllRightsReserved
Safety
DANGER
Theremaybeburiedutilitylinesinthework
area.Diggingintothemmaycauseashock
oranexplosion.
Havethepropertyorworkareamarkedfor
buriedlinesanddonotdiginmarkedareas.
Contactyourlocalmarkingserviceorutility
companytohavethepropertymarked(for
example,intheUS,call811orinAustralia,
call1100forthenationwidemarkingservice).
GeneralSafety
Alwaysfollowallsafetyinstructionstoavoidserious
injuryordeath.
•Donotcarryaloadwiththearmsraised;always
carryloadsclosetotheground;refertoTransport
Position(page4).
•Havethepropertyorworkareamarkedforburied
linesandotherobjects,anddonotdiginmarked
areas.
•ReadandunderstandthecontentofthisOperator’s
Manualbeforestartingtheengine.
•Useyourfullattentionwhileoperatingthe
machine.Donotengageinanyactivitythat
causesdistractions;otherwise,injuryorproperty
damagemayoccur.
•Neverallowchildrenoruntrainedpeopleto
operatethemachine.
•Keepyourhandsandfeetawayfromthemoving
componentsandattachments.
•Donotoperatethemachinewithouttheguards
andothersafetyprotectivedevicesinplaceand
workingonthemachine.
•Keepbystandersandpetsasafedistanceaway
fromthemachine.
•Stopthemachine,shutofftheengine,andremove
thekeybeforeservicing,fueling,orunclogging
themachine.
Improperlyusingormaintainingthismachinecan
resultininjury.Toreducethepotentialforinjury,
complywiththesesafetyinstructionsandalwayspay
attentiontothesafety-alertsymbol,whichmeans
Caution,Warning,orDanger—personalsafety
instruction.Failuretocomplywiththeseinstructions
mayresultinpersonalinjuryordeath.
Youcanndadditionalsafetyinformationwhere
neededthroughoutthisOperator’sManual.
SlopeSafety
•Operatethemachineupanddownslopeswith
theheavyendofthemachineuphill.Weight
distributionchangeswithattachments.Anempty
attachmentmakestherearofthemachinethe
heavyend,andafullattachmentmakesthe
frontofthemachinetheheavyend.Mostother
attachmentsmakethefrontofmachinetheheavy
end.
•Keeptheloaderarmsintheloweredposition
whenonslopes.Raisingtheloaderarmsona
slopeaffectsthestabilityofthemachine.
•Slopesareamajorfactorrelatedtolossofcontrol
andtip-overaccidents,whichcanresultinsevere
injuryordeath.Operatingthemachineonany
slopeoruneventerrainrequiresextracaution.
•Establishyourownproceduresandrulesfor
operatingonslopes.Theseproceduresmust
includesurveyingthesitetodeterminewhich
slopesaresafeformachineoperation.Always
usecommonsenseandgoodjudgmentwhen
performingthissurvey.
•Slowdownanduseextracareonhillsides.Ground
conditionscanaffectthestabilityofthemachine.
•Avoidstartingorstoppingonaslope.Ifthe
machinelosestraction,proceedslowly,straight
downtheslope.
•Avoidturningonslopes.Ifyoumustturn,turn
slowlyandkeeptheheavyendofthemachine
uphill.
•Keepallmovementsonslopesslowandgradual.
Donotmakesuddenchangesinspeedor
direction.
•Ifyoufeeluneasyoperatingthemachineona
slope,donotdoit.
•Watchforholes,ruts,orbumps,asuneventerrain
couldoverturnthemachine.T allgrasscanhide
obstacles.
•Usecautionwhenoperatingonwetsurfaces.
Reducedtractioncouldcausesliding.
•Donotoperatethemachineneardrop-offs,
ditches,embankments,orbodiesofwater.The
machinecouldsuddenlyrolloverifawheelor
trackgoesovertheedgeortheedgecavesin.
Maintainasafedistancebetweenthemachine
andanyhazard.
•Donotremoveoraddattachmentsonaslope.
•Donotparkthemachineonahillsideorslope.
3
AttachmentSafety
•Weargloves,eyeprotection,longpants,
substantialslip-resistantfootwear,andhearing
protectionduringoperationorwhileadjustingor
repairingthemachine.
•Afterstrikingaforeignobject,shutofftheengine,
removethekey,thoroughlyinspecttheattachment
foranydamage,andrepairthedamagebefore
startingandoperatingtheattachment.
•Alwayslowertheattachmenteachtimeyoushut
offthemachineorleavetheoperatingposition.
•Cleananydirtordebristhatmayhinderconnecting
theattachmenttothemachine.Ensurethatthe
attachment-lockingpinsarefullyseatedinthe
holesoftheattachment-mountplate.Refertothe
Operator’sManualforthemachinefordetailed
informationonsafelyconnectinganattachmentto
yourmachine.
•Whenliftingtheattachmentkeepitleveland
preventtheloadfromspillingbackward.
MaintenanceandStorage
Safety
•Checkfastenersatfrequentintervalsforproper
tightnesstoensurethattheequipmentisinsafe
operatingcondition.
•RefertotheOperator’sManualforimportant
detailsifyoustoretheattachmentforanextended
periodoftime
•Maintainorreplacesafetyandinstructionlabels,
asnecessary.
SafetyandInstructional
Decals
Safetydecalsandinstructionsare
easilyvisibletotheoperatorandare
locatednearanyareaofpotential
danger.Replaceanydecalthatis
damagedormissing.
decal99-9935
99-9935
1.Tippinghazard—readtheOperator’sManual;themaximum
loadratingis234kg(515lb).
Operation
Note:Alwaysusethetractionunittoliftandmove
theattachment.
Important:Beforeinstallingthebucket,ensure
thatthemountplatesarefreeofanydirtordebris
andthatthepinsrotatefreely.Ifthepinsdonot
rotatefreely,greasethem.
Beforeinstallingorremovingtheattachment,position
themachineonalevelsurface;refertotheOperator’s
Manualforthetractionunitfortheinstallationand
removalprocedure.
Whenloadingmaterial,alwayshavethebucketlevel
totheground,movingforwardintothematerialtobe
lifted.Whenthebucketisfull,tiltitgentlyrearwardto
decreasetheliftingresistancewhenyoulifttheload.
TransportPosition
Whentransportingaload,keeptheattachmentas
closetothegroundaspossible,nomorethan15cm
(6inches)abovethelowestposition.Tiltitrearwardto
keeptheloadlevel.
g240205
Figure3
1.Nomorethan15cm(6
inches)abovethelowest
position
2.Tilttheloadrearward
4
Specications
Note:Specicationsanddesignaresubjectto
changewithoutnotice.
Width
122cm(48inches)
Length
66cm(26inches)
Height
46cm(18inches)
Weight
79kg(175lb)
Capacity(SAEstruck
capacity)
0.18m
3
(6.4ft
3
)
Tobestprotectyourinvestmentandmaintainoptimal
performanceofyourToroequipment,countonT oro
genuineparts.Whenitcomestoreliability,T oro
deliversreplacementpartsdesignedtotheexact
engineeringspecicationofourequipment.Useonly
Torogenuineparts.
MaximumMaterialDensity
atCapacity
Thedensityofthematerialsmovedbythebucket
variesand,therefore,sodoestheamountofmaterial
thatthebucketcancarrybeforereachingthe
maximumloadrating.Thersttableliststhedensityof
materialthatcanbecarried,bothheapedandstruck
(i.e.,leveledoff),inthebucket.TheMaterialDensity
tablelistscommonmaterialsandtheirdensities.
MaximumDensityforCapacity
BucketCapacity
MaximumDensity
Heapedbucket
950kg/m
3
(60lb/ft
3
)
Struck(leveled)bucket1200kg/m
3
(75lb/ft
3
)
MaterialDensity
Material
Density(Approximate)
Caliche1250kg/m
3
(78lb/ft
3
)
Clay:
Naturalbed
1600kg/m
3
(104lb/ft
3
)
Dry
1480kg/m
3
(93lb/ft
3
)
Wet
1660kg/m
3
(104lb/ft
3
)
Withgravel,dry
1420kg/m
3
(89lb/ft
3
)
Withgravel,wet
1540kg/m
3
(96lb/ft
3
)
Coal:
Anthracite,broken
1100kg/m
3
(69lb/ft
3
)
Bituminous,broken
830kg/m
3
(52lb/ft
3
)
Earth:
Dry,packed
1510kg/m
3
(94lb/ft
3
)
Wet,packed
1600kg/m
3
(100lb/ft
3
)
Loam
1250kg/m
3
(78lb/ft
3
)
Granite,brokenorlarge
crushed
1660kg/m
3
(104lb/ft
3
)
Gravel:
Dry
1510kg/m
3
(94lb/ft
3
)
Pitrun(graveledsand)1930kg/m
3
(120lb/ft
3
)
Dry,13to51mm(1/2to2
inch)
1690kg/m
3
(106lb/ft
3
)
Wet,13to51mm(1/2to2
inch)
2020kg/m
3
(126lb/ft
3
)
Limestone,brokenorcrushed
1540kg/m
3
(96lb/ft
3
)
Sand:
Dry
1420kg/m
3
(89lb/ft
3
)
Wet
1840kg/m
3
(115lb/ft
3
)
Withgravel,dry
1720kg/m
3
(107lb/ft
3
)
Withgravel,wet
2020kg/m
3
(126lb/ft
3
)
Sandstone,broken1510kg/m
3
(94lb/ft
3
)
Shale1250kg/m
3
(78lb/ft
3
)
Slag,broken1750kg/m
3
(109lb/ft
3
)
Stone,crushed1600kg/m
3
(100lb/ft
3
)
Topsoil
950kg/m
3
(59lb/ft
3
)
5
Storage
1.Beforelong-termstorage,washtheattachment
withmilddetergentandwatertoremovedirtand
grime.
2.Paintallscratchedorbaremetalsurfaces.
Note:PaintisavailablefromyourAuthorized
ServiceDealer.
3.Storetheattachmentinaclean,drygarageor
storagearea.Coverittoprotectitandkeepit
clean.
6
Notes:
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Toro Light Materials Bucket User manual
- Type
- User manual
- This manual is also suitable for
Toro Light Materials Bucket is a versatile attachment designed for compact tool carriers with a maximum load rating of 234 kg (515 lb). It has a 0.18 m3 (6.4 ft3) SAE struck capacity and can handle a variety of light materials, including caliche, clay, coal, and earth. The bucket's dimensions are 122 cm (48 inches) in width, 66 cm (26 inches) in length, and 46 cm (18 inches) in height. When transporting a load, keep the bucket as close to the ground as possible, no more than 15 cm (6 inches) above the lowest position.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Toro 4 cu. ft. Standard Bucket, Compact Tool Carrier User manual
-
Toro Narrow Bucket, Compact Tool Carriers User manual
-
Toro High Volume Bucket, TX 1000 Compact Tool Carriers User manual
-
Toro Standard Bucket for Dingo TX 1000 User manual
-
-
-
-
Toro Loose Materials Bucket, Compact Utility Loaders User manual
-
Toro Standard Bucket, Compact Utility Loaders User manual
-