Noble House 296582 Operating instructions

Type
Operating instructions
Page 1 of 7
Caution : You must read this before you proceed
ARMCHAIR
CAUTION : This Chair is NOT a TOY.
Keep your child / children at bay during the process of assembly.
When lifting or moving the Chair and to prevent damage to the Chair, two
adults should perform these actions.
Noble House Home Furnishings LLC
Page 2 of 7
Label Picture Description QTY
A Seat Panel 1
B1 Right Leg Panel (Labelled B1) 1
B2 Left Leg Panel (Labelled B2) 1
C Back Panel 1
C Back Panel 1
D Front Panel 1
E Backrest Panel 1
F Bottom Panel 1
G Backrest Cushion 1
H Seat Cushion 1
Noble House Home Furnishings LLC
Page 3 of 7
Label Picture Description QTY
Short Bolt (M6x20mm) 9
Sleeve Nut (M6x13mm) 13
Allen Key 2
Screw (M4x30mm) 3
Screwdriver
Not
provided
Long Bolt (M6x45mm) 5
1
2
3
4
5
6
Before Beginning Assembly:
Noble House Home Furnishings LLC
Page 4 of 7
OVERVIEW
FRONT FACING
Backrest Cushion (G)
Backrest
Panel (E)
Right Leg Panel (B1)
Seat Cushion (H)
Front Panel (D)
Seat Panel (A)
Left Leg Panel (B2)
Step 1
This Chair has multiple parts and may require up to some 30 minutes to assemble. To
give you an overview of the Chair parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise yourself
with the parts and steps before assembly.
FRONT FACING
seat A
Chair legs B
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC
Page 5 of 7
Step 2
Insert the wooden dowel on Back Panel(C) into mounting position on Right
Leg Panel(B1).
Affix Back Panel(C) with Right Leg Panel(B1) using Screw(), with
seat A
4
5
C
B1
Wooden dowel
Step 3
Affix Back Panel(C) with Right Leg Panel(B1) using Screw(), with
Screwdriver ()
Only loosely tighten the Screws.
Attach Front Panel(D) to Right Leg Panel(B1) using Long Bolt(
) and Sleeve
Nut() with Allen Keys()
2
2
3
3
3
3
6
6
D
B
Nut() with Allen Keys()
Only loosely tighten the Bolts.
Repeat the same process of Step 2 and 3 with the other Left Leg Panel(B2).
Noble House Home Furnishings LLC
Page 6 of 7
Step 4
Step 5
Then, attach Backrest Panel(E) to Right Leg Panel(B1) and Left Leg Panel(B2) using Short Bolt()
and Sleeve Nut() with Allen Keys()
Only loosely tighten the Bolts.
E
B
B
Step 5.1
3
3
2
2
1
1
Step 5.2
Step 6
Place the Chair on a LEVEL SURFACE
Inspect it and make sure all parts are adequately connected.
Gently, sit into to the Chair. This would help to align all parts at all joints.
5.1: Position Bottom Panel(F) into inside of the Loveseat. This can make the Chair have storage
function
5.2: Position Seat Panel(A) onto the Loveseat. Seat Panel (A) should be inside of Front Panel (D)
H
G
F
A
Gently, sit into to the Chair. This would help to align all parts at all joints.
Then get off the Chair, and in a sequential manner, proceed to tighten all Bolts and Screws.
Place Backrest Cushion(G) and Seat Cushion(H) onto the Chair.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC
Page 7 of 7
OUTDOOR
Noble House Home Furnishings LLC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Noble House 296582 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI