Moen 84503 Specification

84503
Moen
Brand
Moen
Model
84503
Type
Specification

This manual is also suitable for

Moen WS84503 is a single-handle lavatory faucet with a durable metal construction and a chrome-plated finish. It features a 1255™ Duralast™ cartridge for reliable performance and comes with an optional knob handle assembly for added convenience. The faucet is WaterSense® certified and meets all applicable standards, ensuring water efficiency and compliance with regulations. It has a maximum flow rate of 1.5 gallons per minute (5.7 liters per minute) at 60 psi and is designed for easy installation through 3-1" diameter holes, spaced 2" on center.

Moen WS84503 is a single-handle lavatory faucet with a durable metal construction and a chrome-plated finish. It features a 1255™ Duralast™ cartridge for reliable performance and comes with an optional knob handle assembly for added convenience. The faucet is WaterSense® certified and meets all applicable standards, ensuring water efficiency and compliance with regulations. It has a maximum flow rate of 1.5 gallons per minute (5.7 liters per minute) at 60 psi and is designed for easy installation through 3-1" diameter holes, spaced 2" on center.

S p e c i f i c a t i o n s
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
2"
(51mm)
2"
(51mm)
1/2" IPS
ADAPTER
DECK PLATE
TOP OF
MOUNTING
SURFACE
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(51mm)
Lift
Rod
2"
(51mm)
ESC.
WIDTH
4-3/8"
(111mm)
5-5/8"
(143mm)
4"
(101mm)
5-1/8"
(130mm)
DESCRIPTION
• Metal construction with chrome plated finish
• 1/2" IPS connections
• Includes optional knob handle assembly
OPERATION
• Pivot action lever style handle
• Temperature controlled through 100˚ degree arc of handle travel
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
°
1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water efficiency
regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED
THRU 3-1" DIA. HOLES, 2" ON CENTER
Single-Handle Lavatory Faucet
with Optional Knob
Handle Assembly
Model: 84503
Rev. 7/15
There is more than 1 version of this model.
Page down to identify the version you have.
S p e c i f i c a t i o n s
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
2"
(51mm)
2"
(51mm)
1/2" IPS
ADAPTER
DECK PLATE
TOP OF
MOUNTING
SURFACE
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(51mm)
Lift
Rod
2"
(51mm)
ESC.
WIDTH
4-3/8"
(111mm)
5-5/8"
(143mm)
4"
(101mm)
5-1/8"
(130mm)
DESCRIPTION
• Metal construction with chrome plated finish
• 1/2" IPS connections
• Includes optional knob handle assembly
OPERATION
• Pivot action lever style handle
• Temperature controlled through 100˚ degree arc of handle travel
FLOW
• Aerator is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED
THRU 3-1" DIA. HOLES, 2" ON CENTER
Single-Handle Lavatory Faucet
with Optional Knob
Handle Assembly
Model: 84503
Rev. 7/15
  • Page 1 1
  • Page 2 2

Moen 84503 Specification

84503
Moen
Brand
Moen
Model
84503
Type
Specification
This manual is also suitable for

Moen WS84503 is a single-handle lavatory faucet with a durable metal construction and a chrome-plated finish. It features a 1255™ Duralast™ cartridge for reliable performance and comes with an optional knob handle assembly for added convenience. The faucet is WaterSense® certified and meets all applicable standards, ensuring water efficiency and compliance with regulations. It has a maximum flow rate of 1.5 gallons per minute (5.7 liters per minute) at 60 psi and is designed for easy installation through 3-1" diameter holes, spaced 2" on center.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents